BOTHHAND 16ST8511

10/100 BASE-T TRANSFORMER
P/N:16ST8511 DATA SHEET
A.GENERAL SPECIFICATIONS:
1.DESIGNED FOR 10/100 MB/s TRANSMISSION OVER UTP-5 CABLE.
2.TESTED & QUALIFIED FOR USE WITH NATIONAL SEMICONDUCTOR'S
DP83840 ETHERNET 10/100 PHY CHIP.
3.CABLE INTERFACE FOR ISOLATION AND LOW COMMON MODE EMISSIONS.
4.16-PIN DIP PACKAGE FOR ECONOMIC COST.
5.OPERATING TEMP RANGE:0°C TO +70°C.
6.STORAGE TEMP RANGE: -25°C TO +125°C.
B.ELECTRICAL SPECIFICATIONS:
1.INSERTION LOSS 0.1 TO 100 MHz (dB MAX.)-1.1
2.RISE TIME:(ns TYP)(10-90%): 2.5 ns.
3.RETURN LOSS (dB MIN):
FREQUENCY TX RX
0.1-60 MHz -17 -15
60-100 MHz -15 -11
4.DIFFERENTIAL TO COMMON MODE REJECTION (dB MIN.):
FREQUENCY TX RX
0.1-60 MHz
-45 -40
60-100 MHz
-40 -35
5.CROSS TALK(dB MIN.):
FREQUENCY
0.1-60 MHz
-40
60-100 MHz -38
6.VOLTAGE ISOLATION(Vrms MIN.):1500
C SCHEMATIC & DIMENSIONS & MARKING (UNIT mm):
Date: April 15-2000 Pre by:WuQingli Rev.: X.0