KR Electronics, Inc. KR Electronics www.krfilters.com General Description KR 2706 is a 160 MHz surface mount bandpass filter. The filter has a minimum 0.5 dB bandwidth of 25 MHz. Other passband frequencies are available. Please consult the factory. Features • Surface Mount Package • Sharp Transition to Stopband • 40 dB Stopband • 50 Ω Source and Load Typical Performance Passband Amplitude & Group Delay Overall Response (0.5 dB/div and 5 nsec/div) (10 dB/div) 15 Jul 2006 15:16:04 CH1 CH2 S 21 S 21 log MAG delay .5 dB/ 5 ns/ 15 Jul 2006 15:18:01 REF -1 dB REF 25 ns CH1 PRm PRm Cor Cor S 21 log MAG 10 dB/ REF 0 dB 1 PRm Cor 2 Smo CENTER 160.000 000 MHz KR Electronics, Inc. 91 Avenel Street Avenel, NJ 07001 © 2006, KR Electronics, Inc. SPAN 25.000 000 MHz CENTER 160.000 000 MHz SPAN 200.000 000 MHz Web Email Phone Fax www.krfilters.com [email protected] (732) 636-1900 (732) 636-1982 Page 1 KR Electronics, Inc. www.krfilters.com KR Electronics 2706 Specifications Parameter Specification Filter type Bandpass Center Frequency 160 MHz Insertion Loss < 2 dB 0.5 dB Bandwidth 25 MHz min Attenuation at 122 MHz > 40 dB Attenuation at 198 MHz > 40 dB 50 Ω Source and Load Physical Dimensions Notes: 1. Surface mount package — Metal cover, open frame 2. Dimensions in inches 3. Use SN60 or SN63 solder during installation 4. If boards are cleaned after installation, units must be completely dried KR Electronics, Inc. 91 Avenel Street Avenel, NJ 07001 © 2006, KR Electronics, Inc. Web Email Phone Fax www.krfilters.com [email protected] (732) 636-1900 (732) 636-1982 Page 2