Technical Data Sheet 3mm POWER LED 30-01USOC/S400-A9 Features . High Flux Output. . Designed for High Current Operation. . Low Thermal Resistance. . Low Profile. . Packaged in Tubes for Use with Automatic Insertion Equipment. . The product itself will remain within RoHS compliant version. Descriptions This revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired light appearance. Applications . Automotive Exterior Lighting . Electronic Signs and Signals . Special Lighting application Device Selection Guide PART NO. 30-01USOC/S400-A9 Revision Chip Material Emitted Color AlGaInP Reddish Orange Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-053 Established date: 08-20-2007 :3 LifecyclePhase: Rev. 3 Lens Color Water Clear Page: 1 of 6 Established by: Jim Lin Release Date:2008-09-20 00:15:51.0 Expired Period: Forever Technical Data Sheet 3mm POWER LED 30-01USOC/S400-A9 Package Dimensions Notes: 1.All dimensions are in millimeters 2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads 3.Tolerances unless dimensions ±0.25mm Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Units Continuous Forward Current IF 70 mA Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 100 mA Reverse Voltage VR 5 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature(T=5 sec) Tsol 260 ± 5 ℃ LED Junction Temperature Power Dissipation at (or below) 25℃ Free Air Tj 125 ℃ Pd 220 mW ESD 2000 V Temperature Electrostatic Discharge Revision Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-053 Established date: 08-20-2007 :3 LifecyclePhase: Rev. 3 Page: 2 of 6 Established by: Jim Lin Release Date:2008-09-20 00:15:51.0 Expired Period: Forever Technical Data Sheet 3mm POWER LED 30-01USOC/S400-A9 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Condition Unit Total Flux Φv 2250 3200 4700 IF=70mA mlm Viewing Angle 2θ1/2 ---- 70 ---- IF=70mA deg Peak Wavelength λp ---- 622 ---- IF=20mA nm Dominant Wavelength λd 613 616 624.5 IF=20mA nm Spectrum Radiation Bandwidth △λ ---- 18 ---- IF=20mA nm Forward Voltage VF 1.95 2.4 2.67 IF=70mA V Reverse Current IR ---- ---- 10 VR=5V µA (1) (2) (3) Rank 30-01USOC/S400-A9 (2) λd(nm) (1) VF(V) (3)Φv(mlm) Bin Min Max Bin Min Max Bin Min Max 0 1.95 2.19 7 613.0 617.5 Y1 2500 3300 1 2.07 2.31 8 616.5 620.5 Y2 2900 4100 2 2.19 2.43 9 619.5 624.5 Y3 3400 5150 3 2.31 2.55 4 2.43 2.67 *Measurement Uncertainty of Forward Voltage：±0.1V *Measurement Uncertainty of Luminous Intensity: ±15% *Measurement Uncertainty of Dominant Wavelength ±1.0nm Revision Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-053 Established date: 08-20-2007 :3 LifecyclePhase: Rev. 3 Page: 3 of 6 Established by: Jim Lin Release Date:2008-09-20 00:15:51.0 Expired Period: Forever Technical Data Sheet 3mm POWER LED 30-01USOC/S400-A9 Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage 80 FORWARD CURRENT (mA) RELATIVE INTENSITY 1.00 0.50 0.00 560 580 600 620 640 WAVELENGTH (nm) 60 40 20 0 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 FORWARD VOLTAGE (V) 660 Relative Intensity vs. Forward Current Forward Current vs. Ambient Temp. 70 1.00 60 FORWARD CURRENT (mA) RELATIVE INTENSITY 0.80 0.60 0.40 0.20 50 40 30 20 10 0.00 0 10 20 30 40 50 60 FORWARD CURRENT (mA) 0 70 0 20 40 60 80 AMBIENT TEMPERATURE (C) 100 Relative Intensity vs. Off Axis Angle Relative Intensity vs. Angle Displacement 1.0 RELATIVE INTENSITY 0 20 -40 40 -60 60 -80 1.0 Revision RELATIVE INTENSITY -20 0.5 80 0.8 0.6 0.4 0.2 0.0 0.2 0.4 0.6 0.8 1.0 0.0 -90 Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-053 Established date: 08-20-2007 :3 LifecyclePhase: -60 -30 0 30 60 VIEWING ANGLE (DEGREE) Rev. 3 90 Page: 4 of 6 Established by: Jim Lin Release Date:2008-09-20 00:15:51.0 Expired Period: Forever Technical Data Sheet 3mm POWER LED 30-01USOC/S400-A9 Packing Quantity Specification (1) 60 pcs/1 tube, 30 tubes/1 small inside box, 12 small inside boxes/1 outside box (2) 60 pcs/1 tube, 105 tubes/1 big inside box, 4 big inside boxes/1 outside box Label Form Specification (1)Tube Label Form PART NO: 30-01USOC/S400-A9 QTY: 60 LOT NO: CAT: (2)Box Label Form EVERLIGHT CPN: P/N: RoHS 30-01USOC/S400-A9 QTY： CAT: HUE: REF: LOT NO： MADE IN TAIWAN PART NO: Everlgiht’s Production Number QTY: Packing Quantity LOT NO: Lot Number CAT: Ranks of Forward Voltage, Dominant Wavelength and Total Flux CPN: Customer’s Production Number P/N : Production Number HUE: Reference REF: Reference MADE IN TAIWAN: Production Place Revision Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-053 Established date: 08-20-2007 :3 LifecyclePhase: Rev. 3 Page: 5 of 6 Established by: Jim Lin Release Date:2008-09-20 00:15:51.0 Expired Period: Forever Technical Data Sheet 3mm POWER LED 30-01USOC/S400-A9 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions Hand Soldering DIP Soldering Temp. at tip of iron 400℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 265 Max. Distance 3mm Min.(From solder joint to case) Bath time. 5 sec Max. Distance 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C. Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http:\\www.everlight.com Device number: DLE-300-053 Established date: 08-20-2007 :3 LifecyclePhase: Rev. 3 Page: 6 of 6 Established by: Jim Lin Release Date:2008-09-20 00:15:51.0 Expired Period: Forever