"High Frequency Ceramic Solutions" 890 / 1850 MHz Diplexer (Enhanced Harmonic Rejection Type) P/N 0892DP14B1850 Detail Specification: 08/02/04 Page 1 of 2 General Specifications Part Number 0892DP14B1850 Input Power 3 Watts max. Frequency (MHz) 824 - 960 1710 - 1990 Impedance 50 Ω 0.6 dB max. 15 dB min. Operating & Storage Temp -40 to +85°C 4,000 Attenuation in High Band Path 20 dB min. 0.9 dB max. Pass-band Return Loss 9.5 dB min. 9.5 dB min. Attenuation in Low Band Path Reel Quanity Terminal Configuration 1 Mechanical Dimensions In L 0.063 ± 0.004 W 0.031 ± 0.004 T 0.024 ± 0.004 mm 1.60 ± 0.10 0.80 ± 0.10 a 0.008 ± 0.004 b 0.008 +.004/-.006 0.20 ± 0.10 0.20 +0.1/-0.15 c 0.006 ± 0.004 g 0.012 ± 0.004 p 0.020 ± 0.002 0.15 ± 0.10 0.30 ± 0.10 0.50 ± 0.05 W c 0.60 ± 0.10 Function No. 2 GND 3 Higher Freq. Port (P1) 4 GND 5 Common Port (P2) 6 GND L a Lower Freq. Port (P3) 1 2 3 6 5 4 p T g Unit : mm b Mounting Considerations Mount these devices with brown mark facing up. Line width should be designed to provide 50Ω impedance matching characteristics. Units: mm 0.25 * Solder Resist 0.25 * 0.25 Land Through-hole (φ0.35) * 0.55 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 931 Via Alondra • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2003 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 890 / 1850 MHz Diplexer (Enhanced Harmonic Rejection Type) P/N 0892DP14B1850 Detail Specification: 08/02/04 Page 2 of 2 Typical Electrical Performance (T=25°C) ) ) ) ) ) ) Attenuation & Return Loss ) ) ) ) ) ) ) ) ) ) ) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 931 Via Alondra • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2003 Johanson Technology, Inc. All Rights Reserved