EMI/EMP Filters 240-382J (Hermetic Version Shown) MIL-DTL-38999 Series II Filter Connector Jam Nut Receptacle Contact Gender P - Pin S - Socket MIL-DTL-38999 Series II Filter Connector Product Code Termination S - Solder Cup P - PC Tail Insert Arrangement IAW MIL-STD-1560 240 - 382 J Shell Style J - Jam Nut C H2 Alternate Key Position Per MIL-DTL-38999 A, B, C, D, N = Normal 15-35 P S Capacitance (See Table II) P Filter Type P - Pi Circuit C - C Circuit Connector Class (See Table I) A N N Flange Mounting Style N - Not Applicable L Max. J - Jam Nut F Master Key 90°/85° B Dia. .409 (10.4) .362 (9.2) Panel Thickness .105 (2.7) .084 (2.1) Contrasting Color Pin Ends 3 PL EP Max. (Pin) EP Max. (Socket) O-Ring Solder-Cup Contact (P) Feedthrough (C) D C Flat 120° BSC TYP A Thread Nut Per MS27512 D .175 (4.5) .125 (3.2) G H Flat © 2008 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-16 E-Mail: [email protected] EMI/EMP Filters 240-382J (Hermetic Version Shown) MIL-DTL-38999 Series II Filter Connector Jam Nut Receptacle TABLE I: CONNECTOR CLASS SYM CLASS MATERIAL FINISH DESCRIPTION M Environmental Aluminum Electroless Nickel PANEL IV: JAM-NUT PANEL CUT-OUTS MT Environmental Aluminum Ni-PTFE 1000 Hour GreyTM Nickel Fluorocarbon Polymer NF Environmental Aluminum Cadmium O.D. Over Electroless Nickel P Environmental Stainless Steel ZN Environmental Aluminum H2 Hermetic Stainless Steel Electro-Deposited Nickel Electroless Nickel PI - CIRCUIT (pF) C - CIRCUIT (pF) X* 160,000 - 240,000 80,000 - 120,000 Y* 80,000 - 120,000 40,000 - 60,000 Z* 60,000 - 90,000 30,000 - 45,000 A 38,000 - 56,000 19,000 - 28,000 B 32,000 - 45,000 16,000 - 22,500 C 18,000 - 33,000 9,000 - 16,500 D 8,000 - 12,000 4,000 - 6,000 E 3,300 - 5,000 1,650 - 2,500 F 800 - 1,300 400 - 650 G 400 - 600 200 - 300 Consult Factory for Additional Filter Types, TVS Diodes, and other Custom Filter Connector Configurations. H Flat G 08 .894 (22.7) .884 (22.5) .833 (21.2) .823 (20.9) 10 1.020 (25.9) 1.010 (25.7) .957 (24.3) .947 (24.1) 12 1.144 (29.1) 1.134 (28.8) 1.081 (27.5) 1.071 (27.2) 14 1.269 (32.2) 1.259 (32.0) 1.206 (30.6) 1.196 (30.4) 16 1.394 (35.4) 1.384 (35.2) 1.336 (33.9) 1.326 (33.7) 18 1.520 (38.6) 1.510 (38.4) 1.456 (37.0) 1.446 (36.7) 20 1.645 (41.8) 1.635 (41.5) 1.581 (40.2) 1.571 (39.9) 22 1.750 (44.5) 1.740 (44.2) 1.706 (43.3) 1.696 (43.1) 24 1.895 (48.1) 1.885 (47.9) 1.831 (46.5) 1.821 (46.3) F G DIA. H L MAX. .743 (18.9) .733 (18.6) .743 (18.9) .733 (18.6) .743 (18.9) .733 (18.6) .743 (18.9) .733 (18.6) .743 (18.9) .733 (18.6) .743 (18.9) .733 (18.6) .769 (19.5) .759 (19.3) .894 (22.7) .884 (22.5) 1.020 (25.9) 1.010 (25.7) 1.144 (29.1) 1.134 (28.8) 1.269 (32.2) 1.259 (32.0) 1.394 (35.4) 1.384 (35.2) 1.520 (38.6) 1.510 (38.4) 1.645 (41.8) 1.635 (41.5) 1.750 (44.5) 1.740 (44.2) 1.895 (48.1) 1.885 (47.9) .833 (21.2) .823 (20.9) .957 (24.3) .947 (24.1) 1.081 (27.5) 1.071 (27.2) 1.206 (30.6) 1.196 (30.4) 1.336 (33.9) 1.326 (33.7) 1.456 (37.0) 1.446 (36.7) 1.581 (40.2) 1.571 (39.9) 1.706 (43.3) 1.696 (43.1) 1.831 (46.5) 1.821 (46.3) 1.024 (26.0) Zinc-Nickel Over Electroless Nickel TABLE II: CAPACITOR ARRAY CODE CAPACITANCE RANGE CLASS SHELL SIZE * Reduced DWV – Please consult factory. TABLE III SHELL SIZE 08 10 12 14 16 18 20 22 24 A THREAD .1P- .03L-TS B DIA. 1.391 (35.3) 1.359 (34.5) 1.516 (38.5) .1.000-20 UNEF 1.484 (37.7) 1.641 (41.7) 1.125-18 UNEF 1.609 (40.9) 1.766 (44.9) 1.250-18 UNEF 1.734 (44.0) 1.954 (49.6) 1.375-18 UNEF 1.922 (48.8) 2.032 (51.6) 1.500-18 UNEF 2.000 (50.8) 2.157 (54.8) 1.625-18 UNEF 2.125 (54.0) 2.281 (57.9) 1.750-18 UNS 2.249 (57.1) 2.406 (61.1) 1.875-16 UN 2.374 (60.3) .875-20 UNEF C FLAT D A/F .818 (20.8) .811 (20.6) .942 (23.9) .935 (23.7) 1.066 (27.1) 1.059 (26.9) 1.191 (30.3) 1.184 (30.1) 1.321 (33.6) 1.314 (33.4) 1.441 (36.6) 1.434 (36.4) 1.566 (39.8) 1.559 (39.6) 1.691 (43.0) 1.684 (42.8) 1.816 (46.1) 1.809 (45.9) 1.266 (32.2) 1.234 (31.3) 1.391 (35.3) 1.359 (34.5) 1.516 (38.5) 1.484 (37.7) 1.641 (41.7) 1.609 (40.9) 1.797 (45.6) 1.765 (44.8) 1.906 (48.4) 1.874 (47.6) 2.032 (51.6) 2.000 (50.8) 2.156 (54.8) 2.124 (53.9) 2.281 (57.9) 2.249 (57.1) EP MAX. ES MAX. .281 (7.1) .359 (9.1) .281 (7.1) .359 (9.1) .281 (7.1) .359 (9.1) .281 (7.1) .359 (9.1) .281 (7.1) .359 (9.1) .281 (7.1) .359 (9.1) .250 (6.4) .344 (8.7) .250 (6.4) (19.5) .344 (8.7) .769 .759 (19.3) .250 (6.4) (19.5) .344 (8.7) .769 .759 (19.3) 1.024 (26.0) 1.024 (26.0) 1.024 (26.0) 1.024 (26.0) 1.024 (26.0) 1.019 (25.9) 1.019 (25.9) 1.019 (25.9) *Some dimensions do not apply. Consult factory © 2008 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-17 E-Mail: [email protected] C