M8TH / M8THC Load Insensitive Mixer Rev. V5 Features • • • • • • Product Image LO 1 TO 3400 MHz RF 1 TO 3400 MHz IF 1 TO 2000 MHz LO DRIVE: +23 dBm (NOMINAL) INSENSITIVE TO SYSTEM MISMATCH HIGH INTERCEPT: +29 dBm (TYP.) Description The M8TH is a termination insensitive mixer, designed for use in military, wireless and test equipment applications. The design utilizes Schottky bridge quad diodes, broadband ferrite baluns and internal loads to provide excellent performance without degradation due to external VSWR mismatches. Environmental screening available to MIL-STD-883, MIL-STD-202 or MIL-DTL-28837, consult factory. Ordering Information Part Number Package M8TH TO-8 M8THC SMA Connectorized Electrical Specifications: Z0 = 50Ω Lo =+23 dBm (Downconverter application only) Typical Parameter Test Conditions Guaranteed Units +25ºC -54º to +85ºC* SSB Conversion Loss (max) & SSB Noise Figure (max) fR = 0.005 to 2 GHz, fL = 0.005 to 2 GHz, fI = 0.001 to 0.5 GHz fR = 0.001 to 3.4 GHz, fL = 0.001 to 3.4 GHz, fI = 0.001 to 2 GHz dB dB 6.5 8.5 8.0 10.5 8.3 10.8 Isolation, L to R (min) fL = 0.01 to 1.5 GHz fL = 0.01 to 3.4 GHz dB dB 37 35 30 22 29 21 Isolation, L to I (min) fL = 0.01 to 1.5 GHz fL = 0.01 to 3.4 GHz dB dB 40 35 30 25 29 24 Isolation, R to I (min) fR = 0.01 to 3.4 GHz dB 21 1 dB Conversion Comp. fL = +23 dBm dBm +17 Input IP3 fR1 = 1 GHz at 0 dBm, fR2 = 1.01 GHz at 0 dBm, fL = 1.8 GHz at +22 dBm dBm +29 * The M8TC specification limits apply at 0ºC to +50ºC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. M8TH / M8THC Load Insensitive Mixer Rev. V5 Typical Performance Curves 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. M8TH / M8THC Load Insensitive Mixer Rev. V5 Outline Drawing: TO-8 * Absolute Maximum Ratings Parameter Absolute Maximum Operating Temperature -54ºC to +100ºC Storage Temperature -65ºC to +100ºC Peak Input Power +27 dBm max @ +25ºC +23 dBm max @ +100ºC Peak Input Current mA DC Weight: 2 grams (0.07 oz.) max Outline Drawing: SMA Connectorized * Weight: 22.5 grams (0.77 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.