FD93H / FD93HC Frequency Doubler Rev. V4 Features • • • • Product Image INPUT: 2 TO 9 GHz OUTPUT: 4 TO 18 GHz INPUT DRIVE LEVEL: +19 dBm (NOMINAL) HERMETICALLY-SEALED PACKAGE Description The FD93H is a passive bridge diode frequency doubler, designed for use in the high volume commercial and test equipment applications. The design utilizes Schottky bridge quad diodes and broadband baluns to attain excellent performance. The use of high temperature solder and welded assembly processes used internally makes it ideal for use in semi-automated and automated assembly. Environmental screening available to MIL-STD-883, MIL-STD-202, or MIL-DTL-28837, consult factory. Ordering Information Part Number Package FD93H Versapac FD93HC SMA Connectorized Electrical Specifications: Z0 = 50Ω Pin = +19 dBm Typical Parameter Test Conditions Guaranteed Units +25ºC -54º to +85ºC SSB Conversion Loss (max) fin = 2 to 4 GHz fin = 4 to 9 GHz dB dB 10.0 12.0 13.0 14.0 13.3 14.3 Fundamental Suppression (min) fin = 2 to 9 GHz dBc 25 18 17 Third Harmonic Suppression fin = 2 to 6 GHz dBc 25 16 15 Input VSWR fin = 2 to 9 GHz 1.5:1 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FD93H / FD93HC Frequency Doubler Rev. V4 Typical Performance Curves 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. FD93H / FD93HC Frequency Doubler Rev. V4 Absolute Maximum Ratings Outline Drawing: Versapac * Parameter Absolute Maximum Operating Temperature -54ºC to +100ºC Storage Temperature -65ºC to +100ºC Peak Input Power +26 dBm max @ +25ºC +23 dBm max @ +100ºC Weight: 8 grams (0.28 oz.) max Outline Drawing: SMA Connectorized * Weight: 29 grams (1.02 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.