MASW-008899 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Features • • • • • • • • Functional Schematic Low Insertion Loss: 0.4 dB @ 2.4 GHz Moderate Isolation: 27 dB @ 2.4 GHz Low Power Consumption: 5 μA @ +3.0 V Reduced Gate Lag for Fast Settling Time Lead-Free SC70-6LD Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible C = 39 pF V1 RFC V2 RF1 GND RF2 Description M/A-COM’s MASW-008899 is a GaAs PHEMT MMIC SPDT switch in a lead-free SC-70 (SOT-363) surface mount plastic package. The MASW-008899 is ideally suited for applications where very small size and low cost are required. Typical applications are transmit / receive (Tx / Rx) switching in linear systems such as WLAN 802.11b/g. Other applications include 1.9 GHz and 2.4 GHz DECT and linear systems operating up to 3.0 GHz. Pin 1 C = 39 pF Pin Configuration The MASW-008899 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information1,2 Part Number C = 39 pF Pin No. Pin Name Description 1 RF1 RF Port 1 2 GND Ground 3 RF2 RF Port 2 4 V2 Control 2 5 RFC RF Input 6 V1 Control 1 Absolute Maximum Ratings 3,4 Package Parameter Absolute Maximum MASW-008899-000000 Bulk packaging Input Power (0.5 - 3.0 GHz) 3 V Control +30 dBm MASW-008899-TR3000 3000 piece reel Voltage -8.5 V < Vc < +8.5 V MASW-008899-001SMB Sample Board, DC - 3.0 GHz Tuning Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-008899 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Electrical Specifications: TA = 25°C, VC = 0 V / 3 V, Z0 = 50 Ω 5 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss6 1.0 GHz 2.4 GHz dB dB — — 0.3 0.4 — 0.5 Isolation 1.0 GHz 2.4 GHz dB dB — 25 24 27 — — VSWR 0.05 - 3.0 GHz Ratio — 1.2:1 — IP2 Two Tone, +5 dBm / Tone, 5 MHz Spacing 2.4 GHz dBm — 80 — IP3 Two Tone, +5 dBm / Tone, 5 MHz Spacing 2.4 GHz dBm — 48 — Linear Pout 2.5 GHz, OFDM, QAM-64,54Mbps, EVM=2.5% 3.0 V 3.3 V 5.0 V dBm dBm dBm — — — 22.5 24.0 28.5 — — — P1dB — dBm — 28 — Trise, Tfall 10% to 90% RF and 90% to 10% RF ns — 35 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF ns — 40 — Transients — mV — 10 — Current VC = 3.0 V µA — 5 10 RON t > 10 ms after OFF to ON Switching (settled) Ω — 1.5 2.5 Gate Lag |ΔRon| between 200 µs and 10 ms after OFF to ON Switching Ω — 0.15 0.25 5. For positive voltage control, external DC blocking capacitors are required on all RF ports. 6. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz – 1.0 GHz, 39 pF for 0.5 - 3.0 GHz. Truth Table 7,8 Qualification Control V1 Control V2 RFC-RF1 RFC-RF2 0 1 On Off 1 0 Off On 7. Differential voltage, V (state 1) - V (state 0), must be +2.3 V minimum and must not exceed 8.5 V. 8. 0 = 0 V ± 0.2 V, 1 = +2.5 V to 5.0 V Qualified to M/A-COM specification REL-201, Process Flow –2. Handling Procedures The following precautions should be observed to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-008899 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Typical Performance Curves Isolation Insertion Loss 0.6 30 +25°C -40°C +85°C 0.5 28 0.4 26 0.3 24 0.2 0.5 1.0 1.5 2.0 2.5 3.0 +25°C -40°C +85°C 22 0.5 1.0 Frequency (GHz) 1.5 2.0 2.5 3.0 30 35 Frequency (GHz) VSWR EVM vs. Pout @ 2.5 GHz 10 1.4 +25°C -40°C +85°C 1.3 8 3.0 V 3.3 V 5.0 V 6 1.2 4 1.1 1.0 0.5 2 0 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 10 15 20 25 Pout (dBm) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-008899 GaAs SPDT Switch DC - 3.0 GHz Rev. V2 Lead-Free SC70-6LD (SOT-363)† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.