6CWH02FNPbF
Vishay High Power Products
Ultrafast Rectifier,
2 x 3 A FRED PtTM
FEATURES
Base
common
cathode
4
• Ultrafast recovery time
• Low forward voltage drop
RoHS
• Low leakage current
COMPLIANT
• 175 °C operating junction temperature
• Lead (Pb)-free ("PbF" suffix)
• Designed and qualified for Q101 level
2
Common
1 cathode
D-PAK
3
Anode
Anode
DESCRIPTION/APPLICATIONS
Vishay HPP´s 200 V series are the state of the art hyperfast
recovery rectifiers specifically designed with optimized
performance of forward voltage drop and hyperfast recovery
time.
The planar structure and the platinum doped life time
control, guarantee the best overall performance,
ruggedness and reliability characteristics.
These devices are intended for use in the output
rectification stage of SMPS, UPS, dc-to-dc converters as
well as freewheeling diode in low voltage inverters and
chopper motor drives.
Their extremely optimized stored charge and low recovery
current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
PRODUCT SUMMARY
trr
25 ns
IF(AV)
2x3A
VR
200 V
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Peak repetitive reverse voltage
VRRM
Average rectified forward current per device
IF(AV)
Non-repetitive peak surge current
IFSM
Peak repetitive forward current per diode
IFM
Operating junction and storage temperatures
TEST CONDITIONS
MAX.
UNITS
200
V
Total device, rated VR, TC = 159 °C
6
50
Rated VR , square wave, 20 kHz, TC = 159 °C
TJ, TStg
A
6
- 65 to 175
°C
MIN.
TYP.
MAX.
UNITS
200
-
-
IF = 3 A
-
-
1
IF = 3 A, TJ = 125 °C
-
-
0.9
IF = 6 A
-
-
1.2
IF = 6 A, TJ = 125 °C
-
-
1.08
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
Breakdown voltage,
blocking voltage
Forward voltage
SYMBOL
VBR,
VR
VF
TEST CONDITIONS
IR = 100 µA
VR = VR rated
-
-
5
TJ = 125 °C, VR = VR rated
-
-
100
V
µA
Reverse leakage current
IR
Junction capacitance
CT
VR = 200 V
-
12
-
pF
Series inductance
LS
Measured lead to lead 5 mm from package body
-
8.0
-
nH
Document Number: 94550
Revision: 21-Jul-08
For technical questions, contact: [email protected]
www.vishay.com
1
6CWH02FNPbF
Vishay High Power Products
Ultrafast Rectifier,
2 x 3 A FRED PtTM
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER
Reverse recovery time
SYMBOL
trr
TEST CONDITIONS
MIN.
Reverse recovery charge
IRRM
Qrr
MAX.
IF = 1.0 A, dIF/dt = 50 A/µs, VR = 30 V
-
-
35
TJ = 25 °C
-
19
-
-
26
-
TJ = 125 °C
Peak recovery current
TYP.
IF = 3 A
VR = 160 V
dIF/dt = 200 A/µs
TJ = 25 °C
TJ = 125 °C
-
3.1
-
-
4.6
-
TJ = 25 °C
-
30
-
TJ = 125 °C
-
60
-
UNITS
ns
A
nC
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNITS
TJ, TStg
- 65
-
175
°C
Thermal resistance,
junction to case per leg
RthJC
-
-
5
Thermal resistance,
junction to ambient per leg
RthJA
-
-
80
Thermal resistance,
case to heatsink
RthCS
-
-
-
-
0.3
-
-
0.01
-
oz.
-
12
(10)
kgf · cm
(lbf · in)
Maximum junction and
storage temperature range
Weight
Mounting torque
6.0
(5.0)
Marking device
Case style D-PAK
www.vishay.com
2
For technical questions, contact: [email protected]
°C/W
g
6CWH02FN
Document Number: 94550
Revision: 21-Jul-08
6CWH02FNPbF
Ultrafast Rectifier,
2 x 3 A FRED PtTM
Vishay High Power Products
100
Reverse Current - I R (μA)
T J = 175˚C
10
150˚C
125˚C
1
100˚C
0.1
0.01
25˚C
10
0.001
0
50
100
150
Reverse Voltage - VR (V)
200
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
Tj = 175°C
100
1
T = 25˚C
J
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
100
Tj = 125°C
Tj = 25°C
0.1
10
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1
1.6
10
100
1000
Forward Voltage Drop - VFM (V)
Reverse Voltage - VR (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage
Thermal Impedance Z thJC (°C/W)
10
D = 0.5
D = 0.2
1
D = 0.1
D = 0.05
D = 0.02
D = 0.01
0.1
0.01
1E-05
Single Pulse
(Thermal Resistance)
1E-04
1E-03
1E-02
1E-01
1E+00
t1, Rectangular Pulse Duration (Seconds)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 94550
Revision: 21-Jul-08
For technical questions, contact: [email protected]
www.vishay.com
3
6CWH02FNPbF
Vishay High Power Products
Ultrafast Rectifier,
2 x 3 A FRED PtTM
50
IF = 3 A
IF = 6 A
40
170
DC
160
trr ( nC )
Allowable Case Temperature (°C)
180
150
30
Square wave (D=0.50)
rated Vr applied
140
20
see note (1)
130
0
1
2
3
4
Average Forward Current - IF(AV)(A)
V R= 30V
T J = 125˚C
T J = 25˚C
5
10
100
1000
di F /dt (A/μs )
Fig. 7 - Typical Reverse Recovery vs. dIF/dt
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
140
V R= 30V
T J = 125˚C
T J = 25˚C
120
RMS Limit
4
IF = 6 A
IF = 3 A
100
3
D = 0.01
D = 0.02
D = 0.05
D = 0.1
D = 0.2
D = 0.5
2
1
Qrr ( nC )
Average Power Loss ( Watts )
5
80
60
40
DC
20
0
0
1
2
3
4
5
Average Forward Current - IF(AV) (A)
Fig. 6 - Forward Power Loss Characteristics
0
100
1000
di F /dt (A/μs )
Fig. 8 - Typical Stored Charge vs. dIF/dt
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94550
Revision: 21-Jul-08
6CWH02FNPbF
Ultrafast Rectifier,
2 x 3 A FRED PtTM
Vishay High Power Products
VR = 200 V
0.01 Ω
L = 70 µH
D.U.T.
dIF/dt
adjust
D
IRFP250
G
S
Fig. 9 - Reverse Recovery Parameter Test Circuit
(3)
trr
IF
ta
tb
0
Qrr
(2)
IRRM
(4)
0.5 IRRM
dI(rec)M/dt (5)
0.75 IRRM
(1) dIF/dt
(1) dIF/dt - rate of change of current
through zero crossing
(2) IRRM - peak reverse recovery current
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(4) Qrr - area under curve defined by trr
and IRRM
Qrr =
trr x IRRM
2
(5) dI(rec)M/dt - peak rate of change of
current during tb portion of trr
Fig. 10 - Reverse Recovery Waveform and Definitions
Document Number: 94550
Revision: 21-Jul-08
For technical questions, contact: [email protected]
www.vishay.com
5
6CWH02FNPbF
Ultrafast Rectifier,
2 x 3 A FRED PtTM
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
6
C
W
H
02
1
2
3
4
5
FN TRL PbF
6
1
-
Current rating (6 = 6 A)
2
-
C = Center tap configuration
-
3
-
Package identifier:
7
8
W = D-PAK
4
4
-
H = Hyperfast recovery
5
-
Voltage rating (02 = 200 V)
6
-
FN = TO-252AA
7
-
None = Tube (50 pieces)
TRL = Tape and reel (left oriented)
TRR = Tape and reel (right oriented)
8
-
None = Standard production
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95016
Part marking information
http://www.vishay.com/doc?95059
Packaging information
http://www.vishay.com/doc?95033
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 94550
Revision: 21-Jul-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1