MA-COM MAAMSS0005

LO Buffer Amplifier
900 - 2000 MHz
MAAMSS0005
V2
Features
•
•
•
•
•
•
Block Diagram
High Gain 2-Stage Amplifier
Single Supply, 3V Operation
High Reverse Isolation
Low Current
Broadband Operation
Miniature Plastic Package, SOT-143
Description
M/A-COM’s MAAMSS0005 is a low current, high
reverse isolation LO buffer amplifier in a low cost
SOT-143 plastic package. The MAAMSS0005 is
ideally suited for LO buffer handset applications in
the Cellular, GPS and PCS frequency bands.
The MAAMSS0005 is fabricated using M/A-COM’s
0.5 micron low noise E/D GaAs MESFET process.
The process features full passivation for increased
performance and reliability.
Ordering Information
1
Pin Configuration
Pin No.
Function
Pin No.
Function
1
GND
3
GND
2
RFIN
4
RFOUT/VDD
Part Number
Package
MAAMSS0005
Bulk Packaging
MAAMSS0005TR
1000 piece reel
Parameter
Absolute Maximum
MAAMSS0005TR-3000
3000 piece reel
VDD
6.0 V
Max Input Level
0 dBm
MAAMSS0005SMB-01
Sample Test Board PCS
MAAMSS0005SMB-02
Sample Test Board CEL
1.
Reference Application Note M513 for reel size information.
Absolute Maximum Ratings 2
Operating Temperature
-30°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
LO Buffer Amplifier
900 - 2000 MHz
MAAMSS0005
V2
Electrical Specifications - Cellular Band (965 - 975 MHz): TA = 25°C, VDD = 3.0 V, Z0 = 50 Ω
Parameter
Test Conditions
Units
Min
Typ
Max
Gain
—
dB
13.0
15.5
17.0
Noise Figure
—
dB
—
2.8
—
VSWR In/Out
—
Ratio
—
1.4:1
—
Output P1dB
—
dBm
—
6
—
Reverse Isolation
—
dB
30
35
—
Output IP3
—
dBm
—
+17
—
Idd
—
mA
—
5
7
Electrical Specifications - PCS Band (1580 - 1780 MHz): TA = 25°C, VDD = 3.0 V, Z0 = 50 Ω
Parameter
Test Conditions
Units
Min
Typ
Max
Gain
—
dB
—
10.0
—
Noise Figure
—
dB
—
3.6
—
VSWR In/Out
—
Ratio
—
1.6:1
—
Output P1dB
—
dBm
—
4
—
Reverse Isolation
—
dB
—
36
—
Output IP3
—
dBm
—
+16
—
Idd
—
mA
—
5
7
Recommended PCB Configuration
Sample Board Schematic
External Circuitry Parts List
Part
Value (Cellular/PCS)
Purpose
C1
1000 pF
DC Block
C2
3.3 pF / 2.2 pF
RF Matching
C3
0.1 µF
Bypass
C4
1.2 pF / 1.0 pF
RF Matching
L1
30 nH / 10 nH
RF Matching
L2
12 nH / 5.1 nH
RF Matching
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
LO Buffer Amplifier
900 - 2000 MHz
MAAMSS0005
V2
Typical Performance Curves vs. Temperature - Cellular Frequency Band VDD = 3 V
Output Return Loss
Input Return Loss
0
0
-5
-5
-10
-10
-15
-15
-20
-20
+25°C
-30°C
+85°C
-25
-30
0.80
0.85
-25
0.90
0.95
1.00
1.05
1.10
-30
0.80
+25°C
-30°C
+85°C
0.85
0.90
Frequency (GHz)
0.95
1.00
1.05
1.10
1.05
1.10
Frequency (GHz)
Reverse Isolation
Gain
0
18
16
-10
14
-20
12
-30
10
+25°C
-30°C
+85°C
8
6
0.80
0.85
0.90
+25°C
-30°C
+85°C
-40
0.95
1.00
1.05
1.10
-50
0.80
0.85
0.90
0.95
1.00
Frequency (GHz)
Frequency (GHz)
Noise Figure
P1dB @ 965 MHz
18
4.5
4.0
16
3.5
14
3.0
2.5
+25°C
-30°C
+85°C
12
2.0
1.5
0.950
+25°C
-30°C
+85°C
0.955
0.960
0.965
0.970
0.975
0.980
Frequency (GHz)
10
-10
-6
-2
2
6
10
Output Power (dBm)
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
LO Buffer Amplifier
900 - 2000 MHz
MAAMSS0005
V2
Typical Performance Curves vs. Temperature - PCS Frequency Band VDD = 3 V
Input Return Loss
Output Return Loss
0
0
-5
-5
-10
-10
-15
-15
-20
-20
+25°C
-30°C
+85°C
+25°C
-30°C
+85°C
-25
-25
-30
-30
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.2
2.0
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
Frequency (GHz)
Frequency (GHz)
Gain
Reverse Isolation
0
12
10
-10
8
+25°C
-30°C
+85°C
-20
6
-30
4
+25°C
-30°C
+85°C
2
0
1.2
-40
-50
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
1.2
1.3
1.4
1.5
Frequency (GHz)
4
1.8
1.9
2.0
14
6
+25°C
-30°C
+85°C
12
4
10
3
8
2
1.575
1.7
P1dB @ 1635 MHz
Noise Figure
5
1.6
Frequency (GHz)
1.627
1.680
1.732
1.785
Frequency (GHz)
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
6
-14
+25°C
-30°C
+85°C
-10
-6
-2
2
6
Output Power (dBm)
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
LO Buffer Amplifier
900 - 2000 MHz
SOT-143
MAAMSS0005
V2
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.