E-Series I/Q Modulator 1070 — 1095 MHz EKIN2-1082 V1 Features • • • • • SM - 28 Package High Carrier Suppression High 3 I and 5 I Suppression LO Power + 10 dBm Typical Surface Mount Tape and reel packaging available Description M/A-COM’s EKIN2-1082 is a passive, high performance surface mount Modulator. It is ideally suited for Direct Modulation in Cellular Base Stations. .Parts are packaged in tape & reel. Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max LO Frequency — 1070 - 1095 MHz — — — I/Q Frequency — DC - 5 MHz — — — 1070 - 1095 dBc 30 35 — 1070 - 1095 dBc 30 35 — 1070 - 1095 dBc 30 36 — 1070 - 1095 dBc 40 50 — LO Carrier Suppression SSB Rejection Harmonic Suppression 3 x I/Q When Q = +90 degrees relative to I; Lower sideband is suppressed. Related to wanted sideband power. Harmonic Suppression 5 x I/Q Conversion Loss — 1070 - 1095 dB — 9.7 11.5 (LO) Carrier Power — 1070 - 1095 dBm — +10 ± 1 — I/Q Drive Level — 1070 - 1095 dBm — -5 — Ordering Information Part Number Package EKIN2-1082TR Tape and Reel (300 piece Reel) 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series I/Q Modulator 1070 — 1095 MHz EKIN2-1082 V1 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max Sideband Spurious — 1025 - 1070 dBc 25 — — Sideband Spurious — 1095 - 1135 dBc 25 — — Carrier Rejection — 1025 - 1070 dBc 25 — — Carrier Rejection — 1095 - 1135 dBc 25 — — Absolute Maximum Ratings 1 Pin Configuration Parameter Absolute Maximum Pin No. Function Impedance 50 Ohms Nominal 1 LO Operating Temperature -40°C to +85°C 2 Case Ground Storage Temperature -55°C to +125°C 3 Case Ground Pin Temperature (10 seconds) 260°C 4 Case Ground 1. Operation of this device above any one of these parameters may cause permanent damage. 5 I 6 Q 7 Case Ground 8 RF 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.