134D www.vishay.com Vishay Sprague Wet Tantalum HI-TMP® Capacitors Tantalum Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation FEATURES • • • • • • • High capacitance Hermetically sealed, tantalum case + 200 °C high temperature Terminations: Axial, standard tin/lead (SnPb) 100 % tin (RoHS-compliant) available Mounting: Through-hole Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. APPLICATIONS • Industrial • Petroleum exploration • High temperature/high stress environment PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 °C to + 85 °C (to + 200 °C with voltage derating) Capacitance Tolerance: At 120 Hz, + 25 °C; ± 20 % standard; ± 10 % DC Leakage Current (DCL Max.): At + 25 °C and above: Leakage current shall not exceed the values listed in the Standard Ratings tables. Life Test: Capacitors are capable of withstanding a 500 h life test at a temperature of + 200 °C at the applicable derated DC working voltage. ORDERING INFORMATION 134D 227 X0 100 K 6 E3 TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C CASE CODE STYLE NUMBER RoHS COMPLIANT This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow X0 = ± 20 % X9 = ± 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V) See Ratings and Case Codes table High temperature 8 = No outer insulating sleeve 6 = High temperature film insulation (above + 125 °C) E3 = 100 % tin termination (RoHS compliant design) Blank = SnPb termination (standard design) Note • Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the unit weight. DIMENSIONS in inches [millimeters] E 0.0253 ± 0.002 [0.64 ± 0.05] dia. (No. 22 AWG tinned nickel leads solderable and weldable) CASE CODE TYPE 134D CLR 79/81 EQUIV. C T1 F T2 T T3 K T4 L1 L2 D E Weld Tantalum D L1 (1) L2 (Max.) E 0.188 ± 0.016 [4.78 ± 0.41] 0.281 ± 0.016 [7.14 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] 0.375 ± 0.016 [9.53 ± 0.41] 0.453 + 0.031/- 0.016 [11.51 + 0.79/- 0.41] 0.641 + 0.031/- 0.016 [16.28 + 0.79/- 0.41] 0.766 + 0.031/- 0.016 [19.46 + 0.79/- 0.41] 1.062 + 0.031/- 0.016 [26.97 + 0.79/- 0.41] 0.734 [18.64] 0.922 [23.42] 1.047 [26.59] 1.343 [34.11] 1.500 ± 0.250 [38.10 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] 2.250 ± 0.250 [57.15 ± 6.35] WEIGHT (g) (Max.) 2.6 6.2 11.6 17.7 Note (1) For insulated parts, add 0.015 inches [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body. Revision: 21-Mar-13 Document Number: 40072 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 134D www.vishay.com Vishay Sprague STANDARD RATINGS TYP. MAX. DCL AC TYP. MAX. MAX. TYP. CAPACITANCE MAX. (μA) CAP. (%) RIPPLE IMP., Z IMP., Z AT 25 °C CASE 120 Hz CAP. CAP. 85 °C 120 Hz CODE ESR 85 °C/ AT - 25 °C AT - 25 °C AT - 55 °C AT - 55 °C 85 °C 125 °C 40 kHz () () (μF) () 25 °C 125 °C (%) (%) (mA) RMS PART NUMBER 50 VDC AT 85 °C; 30 VDC AT 125 °C; 30 VDC AT 200 °C 68 C 1.50 1 5 22 -6 25 - 11 12 55 1400 134D686(1)050C(2)(3) 220 F 0.90 2 10 9 - 15 10 - 25 13 50 2300 134D227(1)050F(2)(3) 470 T 0.75 3 25 6 - 24 8 - 50 10 25 2650 134D477(1)050T(2)(3) 680 K 0.70 5 40 4 - 22 5 - 40 12 40 2900 134D687(1)050K(2)(3) 12 1250 134D476(1)060C(2)(3) 60 VDC AT 85 °C; 40 VDC AT 125 °C; 36 VDC AT 200 °C 47 C 2.00 1 5 34 -8 40 - 20 8 150 F 1.10 2 10 13 - 11 15 - 25 10 30 2050 134D157(1)060F(2)(3) 390 T 0.90 3 25 7 - 27 10 - 50 10 25 2450 134D397(1)060T(2)(3) 560 K 0.80 5 40 5 - 21 6 - 40 12 40 2700 134D567(1)060K(2)(3) 25 1100 134D336(1)075C(2)(3) 75 VDC AT 85 °C; 50 VDC AT 125 °C; 45 VDC AT 200 °C 33 C 2.50 1 5 45 - 3.5 50 -6 8 110 F 1.30 2 10 16 -8 20 - 18 8 30 1900 134D117(1)075F(2)(3) 330 T 1.00 3 30 8 - 30 12 - 50 10 25 2300 134D337(1)075T(2)(3) 470 K 0.90 5 50 6 - 20 7 - 40 10 40 2550 134D477(1)075K(2)(3) 15 C 3.50 1 5 95 25 950 134D156(1)100C(2)(3) 100 VDC AT 85 °C; 65 VDC AT 125 °C; 60 VDC AT 200 °C - 2.5 100 -4 8 68 F 2.10 2 10 25 -6 30 - 14 8 25 1500 134D686(1)100F(2)(3) 150 T 1.60 3 25 14 - 12 18 - 30 8 22 1800 134D157(1)100T(2)(3) 220 K 1.20 5 50 13 - 44 16 - 55 8 15 2200 134D227(1)100K(2)(3) 10 C 5.50 1 5 145 - 2.5 150 -4 8 20 750 134D106(1)125C(2)(3) 47 F 2.30 2 10 35 -5 40 - 12 7 20 1450 134D476(1)125F(2)(3) 125 VDC AT 85 °C; 85 VDC AT 125 °C; 75 VDC AT 200 °C 50 F 2.30 3 10 35 -5 40 - 12 7 20 1450 134D506(1)125F(2)(3) 100 T 1.80 3 25 24 - 20 30 - 35 8 20 1700 134D107(1)125T(2)(3) 150 K 1.60 5 50 13 - 10 16 - 28 6 12 1900 134D157(1)125K(2)(3) Note • Part number definitions: (1) Capacitance tolerance: X9 = 10 %, X0 = 20 % (2) Style number: 8 = No film insulation, 6 = High temperature film isulation (3) Termination: Blank = Standard tin/lead, E3 = RoHS compliant 100 % tin Revision: 21-Mar-13 Document Number: 40072 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 134D www.vishay.com Vishay Sprague EXTENDED RATINGS MAX. TYP. MAX. MAX. CAPACITANCE MAX. DCL (μA) IMP., Z IMP, Z AT 25 °C CASE 120 Hz CAP. 120 Hz CODE ESR 85 °C/ AT - 25 °C AT - 25 °C AT - 55 °C () () (μF) () 25 °C 125 °C (%) TYP. TYP. CAP. (%) CAP. AT - 55 °C 85 °C 125 °C (%) AC RIPPLE 85 °C 40 kHz (mA) RMS PART NUMBER < 15 3500 134D108(1)060K(2)(3) 50 VDC AT 85 °C; 30 VDC AT 125 °C; 30 VDC AT 200 °C C F T K 60 VDC AT 85 °C; 40 VDC AT 125 °C; 36 VDC AT 200 °C C F T 1000 K 0.50 20 120 3 - 25 < 4.5 < - 55 < 12 75 VDC AT 85 °C; 50 VDC AT 125 °C; 45 VDC AT 200 °C C 180 F 1.50 5 25 0.60 20 120 30 - 35 15 20 2000 134D187(1)075C(2)(3) < 6.0 < - 60 < 10 < 15 3500 134D757(1)075K(2)(3) T 750 K 3 - 25 100 VDC AT 85 °C; 65 VDC AT 125 °C; 60 VDC AT 200 °C C F 220 T 1.60 5 30 15 - 40 15 - 45 10 15 1800 134D227(1)100T(2)(3) 400 K 0.70 10 120 5 - 15 15 - 55 10 15 3250 134D407(1)100K(2)(3) 125 VDC AT 85 °C; 85 VDC AT 125 °C; 75 VDC AT 200 °C C F T K Note • Part number definitions: (1) Capacitance tolerance: X9 = 10 %, X0 = 20 % (2) Style number: 8 = No film insulation, 6 = High temperature film isulation (3) Termination: Blank = Standard tin/lead, E3 = RoHS compliant 100 % tin Revision: 21-Mar-13 Document Number: 40072 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000