BAY80 Vishay Semiconductors Small Signal Switching Diode, High Voltage Features • Silicon Epitaxial Planar Diode • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC e2 Applications • General purpose 94 9367 Mechanical Data Case: DO35 Glass case Weight: approx. 125 mg Cathode Band Color: black Packaging Codes/Options: TR/10 k per 13" reel (52 mm tape), 50 k/box TAP/10 k per Ammopack (52 mm tape), 50 k/box Parts Table Part Ordering code BAY80 BAY80-TR or BAY80-TAP Type Marking Remarks BAY80 Tape and Reel/Ammopack Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Repetitive peak reverse voltage Reverse voltage Peak forward surge current tp = 1 µs Repetitive peak forward current Forward continuous current Average forward current Symbol Value Unit VRRM 150 V VR 120 V IFSM 1 A IFRM 625 mA IF 250 mA IFAV 200 mA Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Thermal resistance junction to ambient air l = 4 mm, TL = constant Junction to ambient air Storage temperature range Document Number 85553 Rev. 1.8, 19-Feb-07 Symbol Value Unit RthJA 350 K/W Tj + 175 °C Tstg - 65 to + 175 °C www.vishay.com 1 BAY80 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Forward voltage Symbol Min Max Unit IF = 0.1 mA VF 400 Typ. 520 mV IF = 10 mA VF 630 780 mV IF = 50 mA VF 730 920 mV IF = 100 mA VF 780 1000 mV mV IF = 150 mA VF 1070 VR = 120 V IR 100 nA VR = 120 V, Tj = 150 °C IR 100 µA Breakdown voltage IR = 100 µA, tp/T = 0.01, tp = 0.3 ms V(BR) Diode capacitance VR = 0, f = 1 MHz CD 1.5 Differential forward resistance IF = 10 mA rf 5 Reverse recovery time IF = IR = 30 mA, iR = 3 mA, RL = 100 Ω trr Reverse current 150 V 5 pF Ω 50 ns Typical Characteristics Tamb = 25 °C, unless otherwise specified rf - Differential Forward Resistance (Ω) I R - Reverse Current (µA) 1000 100 Scattering Limit 10 1 VR = VRRM 0.1 0.01 0 40 80 120 160 200 Tj - Junction Temperature (°C) 94 9084 1000 100 Tj = 25 °C 10 1 0.1 94 9089 Figure 1. Reverse Current vs. Junction Temperature 1 10 100 I F - Forward Current (mA) Figure 3. Differential Forward Resistance vs. Forward Current I F - Forward Current (mA) 1000 Tj = 25 °C 100 Scattering Limit 10 1 0.1 0 94 9085 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) Figure 2. Forward Current vs. Forward Voltage www.vishay.com 2 Document Number 85553 Rev. 1.8, 19-Feb-07 BAY80 Vishay Semiconductors Package Dimensions in millimeters (inches): DO35 3.9 max. (0.154) 26 min. (1.024) 1.5 (0.059) 26 min. (1.024) 1.7 (0.067) 0.55 max. (0.022) Cathode Identification Rev. 6 - Date: 29. January 2007 Document no.: 6.560-5004.02-4 94 9366 Document Number 85553 Rev. 1.8, 19-Feb-07 www.vishay.com 3 BAY80 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 4 Document Number 85553 Rev. 1.8, 19-Feb-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1