BYW95BG FAST EFFICIENT GLASS PASSIVATED RECTIFIER VOLTAGE： ：400V CURRENT： ： 3.0A FEATURE DO-201AD Low power loss High surge capability Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Symbol BYW95BG units Maximum Recurrent Peak Reverse Voltage Vrrm 400 V Maximum RMS Voltage Vrms 280 V Maximum DC blocking Voltage Vdc 400 V Maximum Average Forward Rectified Current 3/8”lead length at Ta =50°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward current 3A Peak Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C If(av) 3.0 A Ifsm 125 A Vf 1.3 V Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Trr Cj Rth(ja) Tstg,Tj Ir 10.0 200.0 75 80 20.0 -50 to +150 µA nS pF °C/W °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYW95BG Rev.A1 www.gulfsemi.com