R Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 800-227-4856 FAX 800-227-4866 PRODUCT: RGE1000 DOCUMENT: SCD24093 PCN: 470961 REV LETTER: E REV DATE: MARCH 8, 2000 PAGE NO.: 1 OF 1 PolySwitch® PTC Devices Resettable Fuse Specification Status: PRELIMINARY Electrical Rating Voltage: 16V MAX Current: 100A MAX Insulating Material: Cured, Flame Retarded Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 20 AWG Tin/Lead Plated Copper Marking: Raychem Logo and Voltage 16 G1 0 0 0 Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX 15.5 16.5 21.1 25.2 (0.61) (0.65) (0.83) (0.99) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN 2.0 (0.08) MAX 3.0 (0.12) F TYP 1.2 (0.05) TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT TRIP RATED LIMITS CURRENT AMPS AMPS 25°C AT 25°C HOLD HOLD TRIP 10.0 10.0 17.0 Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: TIME TO TRIP RESISTANCE VALUES SECONDS AT 25°C, 50.0 A MAX 6.0 OHMS AT 25°C MIN MAX 0.004 0.0102 TRIPPED-STATE POWER DISSIPATION WATTS AT 25°C, 16V TYP 3.6 CSA/ TUV/ UL approved. PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.