A4011 / SMA4011 Cascadable Amplifier 1000 to 4000 MHz Rev. V3 Features • • • • Product Image LOW NOISE FIGURE: 2.0 dB (TYP.) MEDIUM OUTPUT POWER: +18.3 dBm (TYP.) HIGH EFFICIENCY: 65 mA (TYP.) @ +5 Vdc PHEMT AMPLIFIER Description The A4011 microwave amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage PHEMT feedback amplifier design displays impressive performance characteristics over a broadband frequency range. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number Package A4011 TO-8 SMA4011 Surface Mount CA4011 ** SMA Connectorized ** The connectorized version is not RoHs compliant. Electrical Specifications: Z0 = 50Ω, VCC = +5 VDC Typical Parameter Parameter Absolute Maximum Storage Temperature -62ºC to +150ºC Case Temperature +125ºC Guaranteed Units 25ºC 0º to 50ºC -54º to +85ºC* Frequency GHz 0.8-4.5 1.0-4.0 1.0-4.0 Small Signal Gain (min) dB 15.5 13.0 12.5 DC Voltage +7 V Gain Flatness (max) dB ±0.4 ±0.7 ±1.0 Continuous Input Power +13 dBm Reverse Isolation dB 16 Short Term Input power (1 minute max.) 100 mW Noise Figure (max) dB 2.0 2.7 3.2 Peak Power (3 µsec max.) 0.25 W Power Output @ 1 dB comp. (min) dBm 18.3 16.5 16.0 “S” Series Burn-In Temperature (case) +125ºC IP3 dBm +29 IP2 dBm +45 Second Order Harmonic IP dBm +50 VSWR Input / Output (max) DC Current @ 5 Volts (max) 1 Absolute Maximum Ratings 1.4:1 / 1.4:1 mA 65 Thermal Data: VCC = +5 VDC 2.0:1 / 1.9:1 70 Parameter Rating Thermal Resistance θjc 47ºC/W 2.2:1 / 2.0:1 Transistor Power Dissipation Pd 0.2 W 75 Junction Temperature Rise Above Case Tjc +9.4ºC * Over temperature performance limits for part number CA4011, guaranteed from 0oC to +50oC only. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. A4011 / SMA4011 Cascadable Amplifier 1000 to 4000 MHz Typical Performance Curves at +25°C Rev. V3 Outline Drawing: TO-8 * WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: Surface Mount * WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: SMA Connectorized * WEIGHT: 19 grams (0.67 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.