Wire-wound Chip Inductors - Molded CTMC2220F Series From 1,200 µH to 10,000 µH Not shown at actual size. RoHS Compliant ctparts.com SPECIFICATIONS Please specify tolerance code when ordering. CTMC2220F-122_ J = ±5%, K = ±10% Inductance (µH) L Test Freq. (MHz) Q Fact. Min. Q Test Freq. (MHz) SRF Min. (MHz) DCR Max. Ω) (Ω Rated DC (mA) CTMC2220F-122_ CTMC2220F-152_ CTMC2220F-182_ CTMC2220F-222_ CTMC2220F-272_ CTMC2220F-332_ CTMC2220F-392_ CTMC2220F-472_ CTMC2220F-562_ CTMC2220F-682_ CTMC2220F-822_ 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 .252 .252 .252 .252 .252 .252 .252 .252 .252 .252 .252 20 20 20 20 20 20 20 20 20 20 20 .252 .252 .252 .252 .252 .252 .252 .252 .252 .252 .252 1.5 1.4 1.3 1.2 1.1 1.0 1.0 0.9 0.8 0.7 0.6 17 20 30 35 55 60 70 78 85 110 125 75 70 60 55 45 40 38 36 33 30 28 CTMC2220F-103_ 10000 .0796 15 .0796 0.5 150 25 Part Number PHYSICAL DIMENSIONS Size mm inches CHARACTERISTICS A B Max. C Max. 5.9 5.2 4.2 4±0.2 0.7±0.2 0.205 0.165 0.157±0.008 0.028±0.008 B C E D LAND PATTERN 4.50 Unit: mm 2.00 4.00 12.09.08 CENTRAL TECHNOLOGIES E 0.232 A Description: Ferrite core, wire-wound molded chip inductor Applications: TV’s, VCR’s, disk drives, computer peripherals, telecommunication devices and electronic control boards for automobiles Operating Temperature: -25°C to +85°C Inductance Tolerance: ±5%, ±10% Testing: Inductance and Q are tested on an HP4285A at specified frequency Packaging: Tape & Reel Part Marking: Inductance code. Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. D Max. Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2008 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice 2.00