NOT RECOMMENDED FOR NEW DESIGNS DLPD3V3LC 3.3V LOW CAPACITANCE BIDIRECTIONAL TVS Please click here to visit our online spice models database. Features • • • • • • • Mechanical Data 330 Watts Peak Pulse Power (tp = 8x20μs) Transient Protection for data, signal, and VCC bus to IEC61000-4-2 level 4 (ESD) Low Capacitance, typ. <3 pF Bidirectional Configuration Surface Mount Package Ideally Suited for Automated Insertion Lead Free By Design/RoHS Compliant (Note 3) "Green" Device (Note 4) • • Case: SOT-26 Case Material: Molded Plastic, “Green” Molding Compound, Note 4. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminal Connections: See Diagram Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 2 Ordering Information: See Page 2 Weight: 0.017 grams (approximate) • • • • • • Device Schematic and Pin Out Configuration Top View Maximum Ratings, Total Device @TA = 25°C unless otherwise specified Characteristic Peak Pulse Power (Note 2) Symbol Value Unit Ppk 330 W Symbol Value Unit RθJA TJ, TSTG 286 °C/W -55 to +150 °C Thermal Characteristics Characteristic Thermal Resistance, Junction to Ambient (Note 5) Operating and Storage Temperature Range Electrical Characteristics @TA = 25°C unless otherwise specified Reverse Standoff Voltage Breakdown Voltage VBR @ IT Test Current VRWM (V) 3.3 Min (V) 4.0 IT (mA) 1.0 Notes: Max (V) ⎯ Max. Reverse Leakage @ VRWM (Note 7) IR (mA) 0.11 Max. Clamping Max. Clamping Voltage Voltage @ Ip = 1A VC @ IPP (Note 2) (Note 2) (V) VC (V) 8.0 22 Max. Peak Pulse Current (Note 2) IPP (A) 15 Typical Total Capacitance (Note 1) (pF) 2.5 1. 2. 3. 4. 5. VR = 0V, f = 1MHz as measured between pins 1 and 3. tp = 8x20μs. See figure 2. No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Device mounted on FR-4 PCB with pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 6. From pin 3 to pin 1, and/or from pin 1 to pin 3. 7. Short duration pulse test used to minimize self-heating effect. DLPD3V3LC Document number: DS30662 Rev. 9 - 3 1 of 4 www.diodes.com November 2009 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGNS DLPD3V3LC IPP, PEAK PULSE CURRENT (%Ipp) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT 100 75 50 25 0 0 25 50 75 100 50 0 100 125 150 175 200 Ordering Information 40 t, TIME (μs) Fig. 2 Pulse Waveform (Note 8) Part Number DLPD3V3LC-7 Notes: 60 20 0 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Pulse Derating Curve Case SOT-26 Packaging 3000/Tape & Reel 8. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. A02 Date Code Key Year Code Month Code 2007 U Jan 1 2008 V Feb 2 DLPD3V3LC Document number: DS30662 Rev. 9 - 3 2009 W Mar 3 Apr 4 YM Marking Information A02 = Product Type Marking Code YM = Date Code Marking Y = Year (ex: U = 2007) M = Month (ex: 9 = September) 2010 X May 5 2011 Y Jun 6 2 of 4 www.diodes.com 2012 Z Jul 7 Aug 8 2013 A Sep 9 2014 B Oct O 2015 C Nov N Dec D November 2009 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGNS DLPD3V3LC Typical Applications Common-Mode I/O Port Protection Differential-Mode Ethernet Protection Package Outline Dimensions A SOT-26 Dim Min Max Typ A 0.35 0.50 0.38 B 1.50 1.70 1.60 C 2.70 3.00 2.80 D ⎯ ⎯ 0.95 H 2.90 3.10 3.00 J 0.013 0.10 0.05 K 1.00 1.30 1.10 L 0.35 0.55 0.40 M 0.10 0.20 0.15 0° 8° α ⎯ All Dimensions in mm B C H K M J L D Suggested Pad Layout E Z E C G Y Dimensions Value (in mm) Z 3.20 G 1.60 X 0.55 Y 0.80 C 2.40 E 0.95 X DLPD3V3LC Document number: DS30662 Rev. 9 - 3 3 of 4 www.diodes.com November 2009 © Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGNS DLPD3V3LC IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2009, Diodes Incorporated www.diodes.com DLPD3V3LC Document number: DS30662 Rev. 9 - 3 4 of 4 www.diodes.com November 2009 © Diodes Incorporated