PD10-0041-S Two-Way In-Phase Power Divider 0.4 - 400 MHz Features • • • • • FP-2 Space Qualified version of DS-113 Designed to meet the Stringent Reliability Standards of Space Hardware 50 Ohms Nominal Impedance Three Decade Bandwidth Low Loss: -0.25 Typ. 0.312 MIN TYP (7.9 MIN) PIN 0.015 DIA ±0.005 (0.38 ±0.13) 8 PLACES 1 2 3 4 0.385 ±0.020 (9.8 ±0.5) 5 6 7 8 Description M/A-COM’s PD10-0041-S is a Two-Way In-Phase Power Divider designed to operate between 400 KHz and 400 MHz 0.080 (2.0) 0.100 (2.5) 0.250 (6.3) Absolute Maximum Ratings1 Parameter Max. Input Power Operating Temperature Storage Temperature 0.350 (8.9) 0.051 (12.9 ±0.5)) Absolute Maximum 1 Watt Max. -30°C to +85°C -65°C to +125°C 0.150 MAX (3.8 MAX) 0.060 (1.5) 1. Operation of this device above any one of these parameters may cause permanent damage. Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS Electrical Specifications, TA = +25°C Units Min. Max. Insertion Loss Parameter Frequency 0.4-400 MHz dB - 0.75 Isolation 0.4-400 MHz dB 25 - Amplitude Balance 0.4-400 MHz dB - 0.15 Phase Balance 0.4-400 MHz - - 1° VSWR 0.4-400 MHz - - 1.5 1. All specifications apply with a 50-Ohm source and load impedance. Specifications subject to change without notice. North America: Tel. (800) 366-2266, Fax (800) 618-8883 Asia/Pacific: Tel.+81-44-844-8296, Fax +81-44-844-8298 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 Visit www.macom.com for additional data sheets and product information. V 2.0 1