MA-COM MAAMSS0067

MAAMSS0067
Low Noise CATV Amplifier
50 - 1000 MHz
Rev. V2
Features
•
•
•
•
•
•
•
•
•
Functional Schematic
Low Distortion
Low Noise Figure
Push Pull Design
Single Positive Supply
Lead-Free 4 mm 20-Lead PQFN Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MAAMSS0003
RO1
text
Description
M/A-COM’s MAAMSS0067 is a GaAs PHEMT MMIC
amplifier in a lead-free 4 mm 20-lead PQFN
package. The MMIC design is configured as a pair
of cascode PHEMT amplifiers for broadband
performance. It is designed for integration in a
75-ohm push-pull, low distortion, amplifier circuit.
The device is ideally suited for use in CATV, DBS,
and HDTV applications where low noise figure and
low distortion are required.
N/C
text
N/C
text
N/C
text
RO2
text
N/C
N/C
N/C
N/C
FB1
FB2
N/C
N/C
N/C
N/C
text
text
RI1
N/C
text
N/C
text
N/C
text
RI2
Pin Configuration 4
Pin No.
Pin Name
Description
1
N/C
No Connection
2
N/C
No Connection
3
FB1
Feedback 1
Ordering Information 1
Part Number
Package
4
N/C
No Connection
MAAMSS0067
Bulk Packaging
5
N/C
No Connection
6
RI1
RF Input 1
7
N/C
No Connection
8
N/C
No Connection
9
N/C
No Connection
10
RI2
RF Input 2
11
N/C
No Connection
12
N/C
No Connection
13
FB2
Feedback 2
14
N/C
No Connection
No Connection
MAAMSS0067TR-3000
MAAMSS0067SMB
3000 piece reel
Sample Test Board
(Includes 5 Samples)
1. Reference Application Note M513 for reel size information.
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
Input Power
+20 dBm
15
N/C
Operating Voltage
+10 volts
16
RO2
RF Output 2
Operating Temperature
-40°C to +85°C
17
N/C
No Connection
Storage Temperature
-65°C to +150°C
18
N/C
No Connection
19
N/C
No Connection
20
RO1
RF Output 1
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
4. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAMSS0067
Low Noise CATV Amplifier
50 - 1000 MHz
Rev. V2
Electrical Specifications: TA = 25°C, Freq: 50 - 1000 MHz, VDD = +5 Volts, Z0 = 75 ohms
Test Circuit with M/A-COM Balun ETN1-1-13
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Gain
—
dB
11.5
12.2
13.0
Gain Flatness
—
dB
—
0.4
1.0
Noise Figure
—
dB
—
3.3
4.0
Input VSWR
—
Ratio
—
1.3:1
—
Output VSWR
—
Ratio
—
1.5:1
—
Output IP3
Two tones at 397 & 403 MHz, +4 dBm output per tone
dBm
—
32
—
Composite Triple Beat, CTB
135 Channels, +13 dBmV/Channel at the input
dBc
—
-78
-70
Composite Second Order, CSO
135 Channels, +13 dBmV/Channel at the input
dBc
—
-78
-70
Cross modulation
135 Channels, +13 dBmV/Channel at the input
dBc
—
-73
-64
P1dB
400 MHz
dBm
—
24
—
IDD
+5 Volts
mA
—
190
225
Recommended Test Circuit Layout6
Test Circuit Schematic5
C3
R1
C5
+5V
L1
text
text
text
text
C7
C1
C9
RF IN
text
text
text
text
T1
T2
RF
OUT
C10
C2
C8
text
text
L2
+5V
C4
C6
R2
5. The 1:1 baluns, T1 & T2, are M/A-COM part number
ETN1-1-13.
6. Reference M/A-COM Application Note S2083 for
recommended PCB configuration. R1 and R2 are 0 ohms.
External Circuitry Parts List
Qty
Description
8
Capacitor, 0.01 uF, 0603, SMT, 10% (C1-C8)
2
Capacitor, 2 pF, 0402, SMT, ± 0.25pF (C9-C10)
2
Inductor, 390 nH, 1008, SMT, 10% (L1, L2)
2
Balun, 1:1, M/A-COM, ETN1-1-13, SMT (T1,T2)
2
Resistor, 0 ohms, 0603, SMT (R1, R2)
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAMSS0067
Low Noise CATV Amplifier
50 - 1000 MHz
Rev. V2
Typical Performance Curves
Gain
Gain vs. Frequency to 3 GHz
13.5
20
13.0
15
+25°C
+85°C
-40°C
12.5
10
12.0
5
11.5
0
11.0
-5
10.5
+25°C
+85°C
-40°C
-10
0
200
400
600
800
1000
0
500
1000
Frequency (MHz)
1500
2000
2500
3000
Frequency (MHz)
Input Return Loss
Output Return Loss
0
0
+25°C
+85°C
-40°C
-5
+25°C
+85°C
-40°C
-5
-10
-10
-15
-15
-20
-20
-25
-25
-30
-30
0
200
400
600
800
1000
0
200
Frequency (MHz)
400
600
800
1000
Frequency (MHz)
OIP3 vs. PIN at 400 MHz, 25°C
Noise Figure vs. Frequency, 25°C
36
5
35
4
34
3
33
2
32
1
31
30
-10
0
-8
-6
-4
-2
Pin (dBm)
0
2
4
0
200
400
600
800
1000
Frequency (MHz)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAAMSS0067
Low Noise CATV Amplifier
50 - 1000 MHz
Rev. V2
Typical Performance Curves (continued)
Gain vs POUT at 400 MHz
15
+25°C
+85°C
-40°C
14
13
12
11
10
16
18
20
22
24
26
Pout (dBm)
Lead-Free 4 mm 20-lead PQFN†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
and/or prototype measurements. Commitment to develop is not guaranteed.
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.