GSIB1520 thru GSIB1580 Vishay General Semiconductor Single-Phase Single In-Line Bridge Rectifiers FEATURES • UL recognition file number E54214 • Thin single in-line package • Glass passivated chip junction • High surge current capability ~ • High case dielectric strength of 2500 VRMS ~ ~ ~ • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Case Style GSIB-5S TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for switching power supply, home appliances, office equipment, industrial automation applications. PRIMARY CHARACTERISTICS IF(AV) 15 A VRRM 200 V to 800 V IFSM 300 A IR 10 µA VF 0.95 V TJ max. 150 °C MECHANICAL DATA Case: GSIB-5S Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: As marked on body Mounting Torque: 10 cm-kg (8.8 inches-lbs) max. Recommended Torque: 5.7 cm-kg (5 inches-lbs) MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GSIB1520 GSIB1540 GSIB1560 GSIB1580 UNIT Maximum repetitive peak reverse voltage VRRM 200 400 600 800 V Maximum RMS voltage VRMS 140 280 420 560 V VDC 200 400 600 800 V Maximum DC blocking voltage Maximum average forward rectified output current at TC = 107 °C TA = 25 °C Peak forward surge current single sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range (1) IF(AV) 15 3.5 (2) A IFSM 300 A I2t 240 A 2s TJ, TSTG - 55 to + 150 °C Notes: (1) Unit case mounted on aluminum plate heatsink (2) Units mounted on P.C.B. without heatsink Document Number: 88644 Revision: 31-Jan-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 GSIB1520 thru GSIB1580 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL GSIB1520 GSIB1540 GSIB1560 GSIB1580 UNIT Maximum instantaneous forward voltage drop per diode 7.5 A VF 0.95 V Maximum DC reverse current at rated DC blocking voltage per diode TA = 25 °C TA = 125 °C IR 10 250 µA THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GSIB1520 GSIB1540 RθJA RθJC Typical thermal resistance GSIB1560 GSIB1580 UNIT (2) 22 1.5 (1) °C/W Notes: (1) Unit case mounted on aluminum plate heatsink (2) Units mounted on P.C.B. without heatsink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE GSIB1560-E3/45 7.0 45 20 Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 300 Peak Forward Surge Current (A) Average Forward Output Current (A) 20 Heatsink Mounting, TC 15 10 5 P.C.B. Mounting, TA 0 250 200 150 100 50 1.0 Cycle 0 0 25 50 75 100 125 150 1 10 100 Temperature (°C) Number of Cycles at 60 Hz Figure 1. Derating Curve Output Rectified Current Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88644 Revision: 31-Jan-08 GSIB1520 thru GSIB1580 Vishay General Semiconductor 1000 TJ = 150 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 25 °C 1 TJ = 125 °C 0.1 0.01 0.3 100 10 1 0.5 0.7 0.9 1.1 1 1.3 100 Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 1000 10 TJ = 150 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 10 Instantaneous Forward Voltage (V) 100 TJ = 125 °C 10 1 TJ = 25 °C 0.1 1 0.1 0.01 0 20 40 60 80 100 0.1 1 10 Percent of Rated Peak Reverse Voltage (%) t - Heating Time (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in millimeters Case Style 5S 4.6 ± 0.2 3.5 ± 0.2 11 ± 0.2 20 ± 0.3 5 + 3.2 ± 0.2 3.6 ± 0.2 30 ± 0.3 2.2 ± 0.2 1 ± 0.1 10 ± 0.2 Document Number: 88644 Revision: 31-Jan-08 7.5 ± 0.2 7.5 ± 0.2 17 .5 ± 0.5 4 ± 0.2 2.5 ± 0.2 0.7 ± 0.1 2.7 ± 0.2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1