MAAL-008091 High Dynamic Range Low Noise Amplifier 800 - 1000 MHz Features Rev. V2 Functional Block Diagram • Low Noise Figure: 1.2 dB • High Input IP3: +18 dBm at 8 V, 60 mA bias +6.5 dBm at 3 V, 20 mA bias • High Gain: 15 dB • Single Supply: +3 to +8 VDC • Adjustable current: 20 to 80 mA with external resistor • Lead-Free SOIC-8 Package • 100% Matte Tin Plating over Copper • Halogen-Free “Green” Mold Compound • 260°C Reflow Compatible • RoHS* Compliant Version of AM50-0003 Description M/A-COM’s MAAL-008091 is a high dynamic range, GaAs MMIC, low noise amplifier in a lead-free SOIC-8, surface mount plastic package. It employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The MAAL-008091 also features flexible biasing to control the current consumption vs. dynamic range trade-off. The MAAL-008091 can operate from any supply voltage in the 3 V to 8 V range. Its current can be controlled over a range of 20 mA to 80 mA with an external resistor. The MAAL-008091 is ideally suited for use where low noise figure, high gain, high dynamic range, and low power consumption are required. Typical applications include receiver front ends in AMPS, GSM, and ETACS base stations. It is also useful as a gain block, buffer, driver, and IF amplifier in both fixed and portable cellular and 900 MHz ISM systems. The MAAL-008091 is fabricated using a low-cost 0.5-micron gate length GaAs process. The process features full passivation for increased performance reliability. Pin Configuration Pin No. Pin Name Description 1 GND RF and DC Ground 2 REXT External Current Control (optional) 3 RFIN RF Input of the amplifier 4 GND RF and DC Ground 5 GND RF and DC Ground 6 RFOUT RF Output of the amplifier 7 VDD Positive supply voltage 8 GND RF and DC Ground Ordering Information 1 Part Number Package MAAL-008091-000000 Bulk Packaging MAAL-008091-TR3000 3000 piece reel 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAL-008091 High Dynamic Range Low Noise Amplifier 800 - 1000 MHz Rev. V2 Electrical Specifications: TA = +25°C, F = 900 MHz, PIN= -30 dBm, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Gain 5 V, 60 mA 2 3 V, 20 mA dB dB 13 12 15 13.5 — — Noise Figure 5 V, 60 mA 2 3 V, 20 mA dB dB — — 1.20 1.25 1.50 1.50 Input VSWR — Ratio — 2.0:1 — Output VSWR — Ratio — 1.5:1 — Output 1 dB Compression 5 V, 60 mA 2 3 V, 20 mA dBm dBm — — 16.5 8.5 — — Input IP3 5 V, 60 mA 2 3 V, 20 mA dBm dBm 12.5 4.0 15 6.5 — — Reverse Isolation — dB — 25 — 2. Using external 15 Ω resistor. See functional schematic. Absolute Maximum Ratings 3,4 Parameter Absolute Maximum VDD +10 VDC Input Power +10 dBm Current5 120 mA Channel Temperature6 +150°C Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. M/A-COM does not recommend sustained operation near these survivability limits. 5. When pin #2 is used to increase current (see note 8). 6. Thermal resistance (θjc) = +88°C/W. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAL-008091 High Dynamic Range Low Noise Amplifier 800 - 1000 MHz Recommended PCB Configuration Rev. V2 Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ω lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008” (0.20 mm) yielding a 50 Ω line width of 0.015” (0.38 mm). The recommended RF metalization is 1 ounce copper. Functional Schematic External Component List 7 Part Value Case Size Manufacturer Purpose C1 47 pF 0603 Murata DC Block C2 470 pF 0603 Murata By-Pass L1 12 nH 0603 Coilcraft Tuning L2 12 nH 0603 Coilcraft RF Choke R1 5.1 K Ω 0603 Panasonic DC Return R2 See Note 8 0603 Panasonic Optional current control 7. All external components are readily available, low cost surface mount components. 8. Pin 2 allows use of an external resistor to ground for optional, higher current. For 20 mA operation, no resistor is used. For IDD ~ 40 mA, R2 = 43 ohms; IDD ~ 60 mA, R2 = 15 ohms; IDD ~ 80 mA, R2 = 10 ohms. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAL-008091 High Dynamic Range Low Noise Amplifier 800 - 1000 MHz Rev. V2 Typical Performance Curves: TA = +25°C, Z0 = 50 Ω, VDD = 5 V, IDD = 60 mA unless otherwise specified VSWR vs. Frequency Gain vs. Frequency 5 17 3 Volts 5 Volts 8 Volts 16 INPUT OUTPUT 4 15 3 14 2 13 12 0.5 0.7 0.9 1.1 1 0.5 Noise Figure vs. Frequency 0.9 1.4 Vdd = 3 to 8 Volts Vdd = 3 to 8 Volts 1.3 1.3 1.2 1.2 1.1 1.1 1 0.85 0.90 0.95 1.0 20 40 60 Frequency (GHz) 80 IDD (mA) Output P1dB vs. Frequency Output P1dB vs. Current, F = 900 MHz 24 24 3 VOLT 5 VOLT 6 VOLT 8 VOLT 20 20 16 16 3 VOLT 5 VOLT 6 VOLT 8 VOLT 12 8 0.80 1.1 Noise Figure vs. Current, F = 900 MHz 1.4 1 0.80 0.7 Frequency (GHz) Frequency (GHz) 12 8 0.85 0.90 Frequency (GHz) 0.95 1.0 20 40 60 80 IDD (mA) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAL-008091 High Dynamic Range Low Noise Amplifier 800 - 1000 MHz Rev. V2 Typical Performance Curves: TA = +25°C, Z0 = 50 Ω, VDD = 5 V, IDD = 60 mA unless otherwise specified Input IP3 vs. Frequency Input IP3 vs. Current, F = 900 MHz 21 21 3 VOLT 5 VOLT 6 VOLT 8 VOLT 17 17 13 13 3 VOLTS 5 VOLTS 6 VOLTS 8 VOLTS 9 9 5 5 0.8 0.85 0.9 0.95 20 1 40 60 80 IDD (mA) Frequency (GHz) Lead-Free SOIC-8† Additional information is available in Application Note M540, “M/A-COM GaAs MMIC LNA SOIC-8 Platform”. † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.