JH- / JHS-114 / JH-133 Quadrature Hybrid, 20 - 40 MHz Features Rev. V3 FP-2 (JH-114) • • • • • Octave Bandwidth 3o Maximum Phase Deviation from 90o Low Loss: 0.5 dB Max. Impedance: 50 Ohms Nominal Input Power: 5 Watts Max.@ 25°C, Derated to 1 Watt @ 100oC • Typical Phase Linearity: 3o from Straight Line • MIL-STD-202 Screening Available Description 3 dB Hybrids are ideal for dividing a signal into two signals of equal amplitude and a constant 90o or 180o phase differential and for Quadrature combining or performing summation/differential combining. SF-1 (JHS-114) TO-8-2 (JH-133) 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. JH- / JHS-114 / JH-133 Quadrature Hybrid, 20 - 40 MHz Rev. V3 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Less Coupling 20 - 40 MHz dB — — 0.5 Isolation — 20 - 40 MHz dB 20 — — Amplitude Balance — 20 - 40 MHz dB — — 0.75 VSWR — 20 - 40 MHz Ratio — — 1.2:1 Deviation from Quadrature — 20 - 40 MHz ° — — 3 Insertion Loss 2 1. All specifications apply with 50 ohm source and load impedance. 2. Average of coupled output less 3 dB. This product contains elements protected by United States Patent Number 3,484,724. Phasing Diagram OUT A Pin Configuration (JH-114) B C D ISO 0° -90° -90° 0° IN A B ISO C 0° 90° D -90° 0° ISO Pin No. Function Pin No. Function 1 A 5 D 2 GND 6 GND 3 GND 7 GND 4 B 8 C ISO Pin Configuration (JHS-114) All other pins and case are ground. Pin Configuration (JH-133) Pin No. Function Pin No. Function 1 GND 7 GND 2 B 8 D 3 GND 9 GND 4 GND 10 GND 5 A 11 C 6 GND 12 GND Pin No. Function Pin No. Function 1 A 3 D 2 B 4 C 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. JH- / JHS-114 / JH-133 Quadrature Hybrid, 20 - 40 MHz Rev. V3 Typical Performance Curves Ordering Information Part Number Package JH-114 PIN FP-2 JHS-114 PIN SF-1 JH-133 PIN TO-8-2 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.