ISO 9001 CERTIFIED E-Series HMIC Double Balanced Mixer 700 - 1400 MHz EMD40-900H Features * SOIC-8 package * IC process * Low profile * LO Drive +13dBm to +17dBm Description M/A-COM’s EMD40-900H is a passive double balanced mixer in a low cost, surface mount SOIC-8 package. Fabricated using a mature silicon process (HMIC), it is ideally suited for high volume cellular and wireless applications. Typical applications include frequency up/down conversion, modulation and demodulation in GSM, AMPS, DAMPS and JDC frequencies. Schematic Pin Configuration Pin 1 2 3 4 Function GND GND GND IF Pin 5 6 7 8 Function LO GND GND RF Ordering Information Part Number EMD40-900H EMD40-900HTR Packaging Tube Tape and Reel Specifications @ 25°C Frequency Range 700 - 1400 MHz Conversion Loss Maximum Mean (x) 700 - 1000 MHz 9.0 dB 6.61 dB 1000 - 1400 MHz 11.0 dB 8.99 dB L - R Isolation Minimum Typical 700 - 1000 MHz 29.0 dB 31.9 dB 1000 - 1400 MHz 28.0 dB 31.2 dB L - I Isolation Minimum Typical 700 - 1000 MHz 24.0 dB 28.1 dB 1000 - 1400 MHz 20.0 dB 26.3 dB LO VSWR Maximum Typical 700 - 1000 MHz 3.10 2.01 1000 - 1400 MHz 4.50 2.48 RF VSWR Maximum Typical 700 - 1000 MHz 3.30 1.70 1000 - 1400 MHz 5.00 4.01 IF VSWR Maximum Typical DC - 400 MHz 1.40 1.16 Input IP3 Minimum Typical 700 - 1000 MHz 16.0 dBm 22.3 dBm 1000 - 1400 MHz 19.0 dBm 24.8 dBm DC - 500MHz IF 1.0 dB Bandwidth +7.0 dBm Input 1dB Compression Test conditions: LO drive = +17dBm, IF frequency = 60MHz. Mean and sigma calculated at 850MHz and 1200MHz. S1232C Sigma (σ) .26 .29 Specifications Subject to Change Without Notice AMP M/A-COM Eurotec * Loughmahon Technology Park * Blackrock * Cork * Ireland * Tel: 353-21-808300 * Fax: 353-21-359935 ISO 9001 CERTIFIED Typical Performance Over Extended Bandwidth Conversion Loss Isolation 40.00 5.00 LO to RF 35.00 +17dBm 6.00 8.00 Isolation (dB) +15dBm 9.00 10.00 25.00 LO to IF 20.00 RF to IF 15.00 10.00 +13dBm 11.00 5.00 VSWR 1600 1500 1400 1300 30.00 256.0 235.0 214.0 193.0 171.0 129.0 106.0 85.0 64.0 43.0 1200 IP3 and 1dB Compression IF Frequency 27.50 25.00 4.5 22.50 4 Power (dBm) 3 2.5 LO 17.50 15.00 12.50 10.00 RF anf LO Frequency (MHz) 1250 950 850 750 650 1500 1400 1300 1200 1100 1000 900 0.00 800 2.50 0 700 0.5 600 5.00 500 1 dB Compression 7.50 1 1150 IF 1050 2 1.5 IP3 20.00 RF 3.5 VSWR 1100 Frequency (MHz) Frequency (MHz) 5 1000 900 800 500 1600 1500 1400 1300 1200 1100 1000 900 800 700 600 500 700 0.00 12.00 600 Conversion Loss (dB) 30.00 7.00 Frequency (MHz) Note: Conversion loss measured with fixed IF frequency of 60MHz. All measurements made with input power of +17dBm. Absolute Maximum Ratings Parameter RF Input Power LO Drive Power Operating/Storage Temp. Absolute Maximum +27dBm +27dBm -40°C to +85°C S 1232 C Specifications Subject to Change Without Notice AMP M/A-COM Eurotec * Loughmahon Technology Park * Blackrock * Cork * Ireland * Tel: 353-21-808300 * Fax: 353-21-359935