Digital Attenuator, 31 dB, 5-Bit DC - 2.0 GHz Features • • • • • • AT-260 V5 Functional Schematic 1-dB Attenuation Steps to 31 dB Ultra Low DC Power Consumption Low Intermodulation Products: IP3 = 50 dBm SSOP-20 Plastic Package Tape and Reel Packaging Available Temperature Stability: ± 0.15 dB from –40°C to +85°C 20 19 18 16 dB 17 16 8 dB 15 14 4 dB 13 12 2 dB 11 1 dB Description M/A-COM’s AT-260 is a 5-bit, 1-dB step GaAs MMIC digital attenuator in a low cost SSOP-20 surface mount plastic package. The AT-260 is ideally suited for use where high accuracy, fast switching, very low power consumption and low intermodulation products are required at a low cost. Typical applications include radio and cellular equipment, wireless LANS, GPS equipment and other gain/level control circuits. The AT-260 is fabricated with a monolithic GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability. Ordering Information Part Number Package AT-260 SSOP 20-Lead AT-260TR Forward Tape and Reel Note: Reference Application Note M513 for reel size information. 1 2 3 4 5 6 7 8 9 10 Pin Configuration Pin No. Function Pin No. Function 1 VC1 11 RF1 2 VC1 12 Ground 3 VC2 13 Ground 4 VC2 14 Ground 5 VC3 15 Ground 6 VC3 16 Ground 7 VC4 17 Ground 8 VC4 18 Ground 9 No Connection 19 Ground 10 VC5 20 RF2 Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Input Power: 0.05 GHz 0.5 - 2.0 GHz +27 dBm +34 dBm Control Voltage +5V, -8.5V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Digital Attenuator, 31 dB, 5-Bit DC - 2.0 GHz AT-260 V5 Electrical Specifications: TA = 25°C, Z0 = 50 Ω Parameter Test Conditions Units Min. Typ. Max. Reference Insertion Loss DC - 0.1 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz dB dB dB dB — — — — 1.6 1.7 1.9 2.2 1.8 1.9 2.2 2.5 Attenuation Accuracy 3 DC - 1.0 GHz DC - 2.0 GHz VSWR (Any state) Ratio — 1.5:1 — Trise, Tfall 10% to 90% RF, 90% to 10% RF nS — 8 — Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF nS — 15 — Transients In Band mV — 2 — 1 dB Compression Input Power 0.05 GHz 0.5 - 2.0 GHz dBm dBm — — 20 27 — — ± (0.20 dB +3% of Atten Setting in dB) dB ± (0.30 dB +3% of Atten Setting in dB) dB IP2 0.05 GHz 0.5 - 2.0 GHz Measured Relative to Input Power (for two-tone input power up to +5 dBm) dBm dBm — — 45 60 — — IP3 0.05 GHz 0.5 - 2.0 GHz Measured Relative to Input Power (for two-tone input power up to +5 dBm) dBm dBm — — 34 50 — — 3. Attenuation accuracy specifications apply with negative bias control and low inductance grounding. Truth Table4 Handling Procedures Control Inputs VC5 VC4 VC4 VC3 VC3 VC2 VC2 VC1 VC1 Atten (dB) 1 1 0 1 0 1 0 1 0 Reference 0 1 0 1 0 1 0 1 0 1 dB 1 0 1 1 0 1 0 1 0 2 dB 1 1 0 0 1 1 0 1 0 4 dB 1 1 0 1 0 0 1 1 0 8 dB 1 1 0 1 0 1 0 0 1 16 dB 0 0 1 0 1 0 1 0 1 31 dB Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4. 0 = Vin Low = 0 V = 0 to -0.2 V @ 20 µA maximum. 1 = Vin High = -5 V @ 20 µA typical to –8 V @ 200 µA maximum. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Digital Attenuator, 31 dB, 5-Bit DC - 2.0 GHz AT-260 V5 Typical Performance Curves Attenuation Accuracy Insertion Loss 1.0 4 +25°C -40°C +85°C 3 0.5 2 0.0 1 -0.5 0 0.0 2 dB 4 dB 8 dB 16 dB 31 dB -1.0 0.5 1.0 1.5 2.0 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) Frequency (GHz) VSWR 1.6 0 1 2 4 8 16 31 1.5 1.4 1.3 1.2 1.1 1.0 0.0 0.5 1.0 1.5 2.0 Frequency (GHz) SSOP-20 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.