MIL-DTL 26482 Type 230-015 MIL-DTL-26482 Series I Type Hermetic Bayonet Coupling Jam Nut Receptacle MS3114 Type Connector Style Insert Arrangement 015 = Hermetic Jam-Nut Mount Receptacle 230 - 015 Series 230 MIL-DTL-26482 Type Z1 10 - 6 Shell Size Z1 = Stainless Steel/ Passivated FT = C1215 Stainless Steel/Tin Plated (See Note 2) D P AB A E D C X Contact Type P = Solder Cup, Pin Face S = Solder Cup, Socket Face Z = Eyelet, Socket Face X = Eyelet, Pin Face D = Socket, Feedthrough C = Pin, Feedthrough M L G Peripheral Gasket ØB Pin Face F W, X, Y or Z (Omit for Normal) Per MIL-STD-1669 Material/Finish .060 Width Polarizing Stripe Alternate Insert Arrangement C R Vitreous Insert J Contact Style "P" & "S" Contact Style "C" & "D" Interfacial Seal Socket Face ØP Contact Style "X" & "Z" F A "V" Thread Painted Bayonet Pins 3 Pl S T APPLICATION NOTES 1. To be identified with manufacturer’s name, part number and date code, space permitting. 2. Material/Finish: Shell and Jam Nut: Z1 - 304L stainless steel/passivate. FT - C1215 stainless steel/tin plated. Titanium and Inconel® available. Consult factory. Contacts - 52 Nickel alloy/gold plate. Bayonets - Stainless steel/passivate. Seals - Silicone elastomer/N.A. Insulation - Glass/N.A. 3. Contact current rating - #20-7.5 Amps, #16-10 Amps, #12-17 Amps, #8-35 Amps. 4. Consult factory and/or MIL-STD-1669 for arrangement and © 2009 Glenair, Inc. insert position options. 5. Glenair 230-015 will mate with any QPL MIL-DTL-26482 Series I bayonet coupling plug of same size and insert polarization. 6. Performance: Hermeticity - <1 x 10-7 cc/sec @ 1 atmosphere differential. Dielectric withstanding voltage - Consult factory or MIL-STD-1669. Insulation resistance - 5000 megohms min @500VDC. 7. Consult factory for feedthrough contact footprints. 8. Metric Dimensions (mm) are indicated in parentheses. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-6 E-Mail: [email protected] B MIL-DTL 26482 Type 230-015 MIL-DTL-26482 Series I Type Hermetic Bayonet Coupling Jam Nut Receptacle MS3114 Type y Mod Code TABLE II E MOD CODES Contact Size ØP 22D .011 .015 Leak Rate lium per second ØK PANEL CUT-OUT ium per second N CODES Designator 16 .0635 .0615 12 .095 .093 Required Leak Rate –585A .024 .028 20 ium per second HERMETIC LEAK RATE MOD CODES 1 x 10-10 cc’s Helium per second –585B 1 x 10-9 cc’s Helium per second –585C 1 x 10-8 cc’s Helium per second TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS (Continued Below) lus Outgassing ing Shell Size hermal vacuum Outgassing 24 hrs. 125° C. Mod 429C Mod 429A Mod 186M B Dia +.000 -032 (0.8) A Max C Flat +.000 -.010 (0.3) E +.010 (0.3) -.005 (0.1) G ± .020 (0.5) F Min J O-Ring Seal MS29513- 8 .954 (24.2) 1.078 (27.4) .530 (13.5) .540 (13.7) .384 (9.8) .117 (3.0) 17 10 1.078 (27.4) 1.203 (30.6) .655 (16.6) .665 (16.9) .384 (9.8) .117 (3.0) 19 12 1.266 (32.2) 1.319 (33.5) .818 (20.8) .828 (21.0) .384 (9.8) .117 (3.0) 22 14 1.391 (35.3) 1.516 (38.5) .942 (23.9) .952 (24.2) .384 (9.8) .117 (3.0) 24 16 1.516 (38.5) 1.641 (41.7) 1.062 (27.0) 1.076 (27.3) .384 (9.8) .117 (3.0) 26 18 1.641 (41.7) 1.766 (44.9) 1.191 (30.3) 1.201 (30.5) .384 (9.8) .117 (3.0) 28 20 1.812 (46.0) 1.953 (49.6) 1.316 (33.4) 1.326 (33.7) .446 (11.3) .148 (3.8) 128 22 1.954 (49.6) 2.078 (52.8) 1.441 (36.6) 1.451 (36.9) .446 (11.3) .148 (3.8) 130 24 2.078 (52.8) 2.203 (56.0) 1.566 (39.8) 1.576 (40.0) .479 (12.2) .148 (3.8) 132 TABLE I (Continued): CONNECTOR AND CUT-OUT DIMENSIONS Shell Size K +.010 (0.3) -.005 (0.1) L Max M +.031 (0.8) -.000 S Panel Thickness Min Max R Max T O-Ring .011 (0.3) V Thread UNEF-2A 8 .572 .875 (22.2) .691 (17.6) .329 .062 (1.6) .125 (3.2) .023 (0.6) .5625-24 10 .697 .875 (22.2) .691 (17.6) .477 .062 (1.6) .125 (3.2) .023 (0.6) .685-24 12 .885 .875 (22.2) .691 (17.6) .564 .062 (1.6) .125 (3.2) .023 (0.6) .875-20 14 1.010 .875 (22.2) .691 (17.6) .689 .062 (1.6) .125 (3.2) .023 (0.6) 1.000-20 1.125-18 16 1.135 .875 (22.2) .691 (17.6) .814 .062 (1.6) .125 (3.2) .023 (0.6) 18 1.260 .875 (22.2) .691 (17.6) .907 .062 (1.6) .125 (3.2) .023 (0.6) 1.250-18 20 1.385 1.094 (27.8) .879 (22.3) 1.039 .062 (1.6) .250 (6.4) .028 (0.7) 1.375-18 22 1.510 1.094 (27.8) .879 (22.3) 1.164 .062 (1.6) .250 (6.4) .028 (0.7) 1.500-18 24 1.635 1.125 (28.6) .912 (23.2) 1.289 .062 (1.6) .250 (6.4) .028 (0.7) 1.625-18 © 2009 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-7 E-Mail: [email protected] D