User's Guide Motor Rotation and 3-Phase Tester Model 480303 Introduction Congratulations on your purchase of Extech’s Motor Rotation and 3-Phase Tester. This professional meter, with proper care, will provide years of safe reliable service. Controls and Indicators 1. 2. 3. 4. 5. 6. 7. Motor Rotation Test Terminal Power Indicator Power Button Clockwise Indicator Counter Clockwise Indicator 3-Phase Rotation Tester Input 3-Phase Rotation Indicator Operation Phase Sequence Function The Phase Sequence function determines if the 3 phases are live and the direction a motor will turn if connected as indicated in Table 1. 1. Connect the three test leads to the power source 2. Observe that all three lights (L1, L2, L3) are active 3. Observe the directional indication lights. 4. If the direction indicated is counter-clockwise, reconnect any two wires until the clockwise indicator is lighted. 5. If the clockwise indicator is lighted, label the power source "L1, L2, L3" Motor Rotation Function 1. Make sure there is no voltage present. 2. Insert the test leads into the input terminals: 3. L1 - Black, L2 - Red, L3 - White. Attach the other ends of the leads to the 3 phase motor. 4. Press and Hold the power button. The green power indicator will light up. 5. Rotate the motor shaft clockwise (as viewed from the end of the shaft). If the red clockwise indicator is lit the 3-phase motor will rotate clockwise if connected to the power supply by the L1-L2-L3 sequence. 6. Rotate motor shaft counter-clockwise. If the red counter-clockwise indicator is lit the 3phase motor will rotate clockwise if connected to the power supply by the L1-L2L3 sequence. 7. If you want the motor to rotate counterclockwise, change the order of the connections to L2-L1-L3 and the motor will rotate counter-clockwise. 480303 Ver. 1.4 9/03 Specifications Signal Input Voltage 100VAC up to 660VAC max., 3 minute limit for over 500VAC. (3 phase Indicator only) Signal Frequency Range Operating Temperature Operating Humidity Power Supply Power Consumption 45 to 70 Hz 32ºF to 122ºF (0ºC to 50ºC) Less than 90% RH 006P DC9V battery Consumption current approx. 14mA for motor rotation field tester and 7mA per phase for rotation field indicator Dimension Weight Standard Accessories 5.9 x 3.4 x 1.6” (150 x 85 x 40mm) 0.5 lbs. (230g ) without battery Test leads (red, black & white) and Instruction Manual Maintenance Battery Replacement 1. Replace the battery when green indicator becomes dim. 2. Open the battery cover with flat screwdriver or coin. 3. Replace the battery (006 DC9V) and reinstall the battery cover Fuse Replacement 1. Replace fuse when red indicators fail to light. 2. Open the case and replace the 0.2A fuse. 3. Reinstall the case. Warranty EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a six month limited warranty applies on sensors and cables). If it should become necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our website at www.extech.com (click on ‘Contact Extech’ and go to ‘Service Department’ to request an RA number). A Return Authorization (RA) number must be issued before any product is returned to Extech. The sender is responsible for shipping charges, freight, insurance and proper packaging to prevent damage in transit. This warranty does not apply to defects resulting from action of the user such as misuse, improper wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification. Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not be liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to repair or replacement of the product. The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or implied. Copyright © 2003 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form. Support Hotline (781) 890-7440 Tech support: Ext. 200; Email: [email protected] Repair/Returns: Ext. 210; Email: [email protected] Website: www.extech.com 480303 Ver. 1.4 9/03