IDT 92HD99B

DATASHEET
SINGLE CHIP PC AUDIO SYSTEM
92HD99
CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Description
Features
The 92HD99 single-chip audio system is a low power
optimized, high fidelity, 4-channel audio codec with stereo
integrated speaker amplifier, capless headphone amplifier,
and low drop out voltage regulator.
•
The high integration of the 92HD99 enables the smallest
PCB footprint with the lowest system BOM count and cost.
92HD99 provides high quality HD Audio capability to
notebook and business desktop PC applications.
•
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
4 Channels (2 stereo DACs and 2 stereo ADCs)
with 24-bit resolution
•
2W Class-D stereo BTL speaker amplifier @
4 ohms and 5V
•
•
•
1
Supports full-duplex stereo audio and simultaneous
VoIP
10 band hardware parametric equalizer
Hardware compressor limiter
Dedicated BTL high pass filter for speaker protection
•
Capless headphone amplifier with charge
pump/LDO
•
Combo Jack Support allowing for dual-function
headphone and headset detection
•
Full HDA015-B low power support
•
Internal digital core LDO voltage regulator
•
Microsoft WLP desktop premium logo compliant
•
Support for 1.5V and 3.3V HDA signaling
•
Digital microphone inputs (mono or stereo mics)
•
Microphone Mute Input (on WB revisions and
beyond)
•
High performance analog mixer
•
2 adjustable VREF Out pins for analog microphone
bias
•
5 analog ports with port presence detect (4 single
ended, 1 BTL)
•
Analog and digital PC Beep support
•
AUX Audio mode for playback
•
40-pad QFN RoHS packages
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Full HDA015-B low power support
•
Audio inactivity transitions codec from D0 to D3 low power mode
•
Resume from D3 to D0 with audio activity in < 10 msec
•
D3 to D0 transition with < -65dB pop/click
•
Port presence detect in D3 with or without bit clock
•
PC beep wake up in D3
•
Additional vendor specific modes for even lower power
Software Support
•
Intuitive IDT HD Sound graphical user interface that allows configurability and preference settings
•
12 band fully parametric equalizer
• Constant, system-level effects tuned to optimize a particular platform can be combined with
user-mode “presets” tailored for specific acoustical environments and applications
• System-level effects automatically disabled when external audio connections made
•
Dynamics Processing
• Enables improved voice articulation
• Compressor/limiter allows higher average volume level without resonances or damage to
speakers.
•
IDT Vista APO wrapper
• Enables multiple APOs to be used with the IDT Driver
•
Microphone Beam Forming, Acoustic Echo Cancellation, and Noise Suppression
•
Dynamic Stream Switching
• Improved multi-streaming user experience with less support calls
•
Broad 3rd party branded software including Creative, Dolby, DTS, and SRS
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
2
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
TABLE OF CONTENTS
1. DESCRIPTION ........................................................................................................................ 10
1.1. Overview ..........................................................................................................................................10
1.2. Orderable Part Numbers ..................................................................................................................10
2. DETAILED DESCRIPTION ..................................................................................................... 11
2.1. Port Functionality .............................................................................................................................11
2.1.1. Port Characteristics ............................................................................................................11
2.1.2. Vref_Out .............................................................................................................................13
2.1.3. Jack Detect ........................................................................................................................13
2.2. Mixer ................................................................................................................................................13
2.3. ADC Multiplexers .............................................................................................................................14
2.4. Power Management .........................................................................................................................14
2.5. AFG D0 ............................................................................................................................................15
2.6. AFG D1 ............................................................................................................................................15
2.7. AFG D2 ............................................................................................................................................15
2.8. AFG D3 ............................................................................................................................................15
2.8.1. AFG D3cold .......................................................................................................................15
2.9. Vendor Specific Function Group Power States D4/D5 ....................................................................16
2.10. Low-voltage HDA Signaling ...........................................................................................................16
2.11. Multi-channel capture ....................................................................................................................16
2.12. EAPD .............................................................................................................................................18
2.13. Digital Microphone Support ...........................................................................................................21
2.14. Analog PC-Beep ............................................................................................................................24
2.15. Digital PC-Beep .............................................................................................................................26
2.16. Headphone Drivers ........................................................................................................................27
2.17. BTL Amplifier .................................................................................................................................27
2.18. BTL Amplifier High-Pass Filter .......................................................................................................27
2.18.1. Filter Description ..............................................................................................................28
2.19. EQ ..................................................................................................................................................28
2.20. Combo Jack Detection ...................................................................................................................28
2.21. GPIO ..............................................................................................................................................29
2.21.1. GPIO Pin mapping and shared functions .........................................................................29
2.21.2. Digital Microphone/GPIO Selection .................................................................................29
2.21.3. Digital Microphone/GPIO Selection .................................................................................29
2.22. HD Audio HDA015-B support ........................................................................................................29
2.23. Digital Core Voltage Regulator ......................................................................................................30
2.24. Aux Audio Support .........................................................................................................................31
2.24.1. General conditions in Aux Audio Mode: ...........................................................................31
2.24.2. Entering Aux Audio Mode ................................................................................................32
2.24.3. “Playback Path” Port Behavior (AnaIog I/O) ....................................................................33
2.24.4. When Port E presence detect = 0 ....................................................................................33
2.24.5. When Port E presence detect = 1 ....................................................................................33
2.24.6. SYSTEM DIAGRAMS (Analog I/O) ..................................................................................34
2.24.7. EAPD ...............................................................................................................................35
2.24.8. Analog PC_Beep .............................................................................................................35
2.24.9. Class-D BTL Issues .........................................................................................................35
2.24.10. Firmware/Software Requirements: .................................................................................35
2.25. Microphone Mute Input ..................................................................................................................36
3. CHARACTERISTICS ............................................................................................................... 37
3.1. Electrical Specifications ...................................................................................................................37
3.1.1. Absolute Maximum Ratings ...............................................................................................37
3.1.2. Recommended Operating Conditions ................................................................................37
3.2. 92HD99 Analog Performance Characteristics .................................................................................38
3.3. Class-D BTL Amplifier Performance ................................................................................................41
3.4. Capless Headphone Supply Characteristics ....................................................................................42
3.5. AC Timing Specs .............................................................................................................................42
3.5.1. HD Audio Bus Timing .........................................................................................................42
3.5.2. Digital Microphone Timing .................................................................................................43
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
3
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
3.5.3. GPIO Characteristics .........................................................................................................43
4. FUNCTIONAL BLOCK DIAGRAM .......................................................................................... 44
5. WIDGET DIAGRAM ................................................................................................................ 45
6. PORT AND PIN CONFIGURATIONS ..................................................................................... 46
6.1. Port Configurations ..........................................................................................................................46
6.2. Pin Configuration Default Register Settings .....................................................................................47
7. WIDGET INFORMATION ........................................................................................................ 48
7.1. Widget List .......................................................................................................................................49
7.2. Reset Key ........................................................................................................................................50
7.3. Root (NID = 00h): VendorID ............................................................................................................50
7.3.1. Root (NID = 00h): RevID ....................................................................................................51
7.3.2. Root (NID = 00h): NodeInfo ...............................................................................................51
7.4. AFG (NID = 01h): NodeInfo .............................................................................................................52
7.4.1. AFG (NID = 01h): FGType .................................................................................................52
7.4.2. AFG (NID = 01h): AFGCap ................................................................................................53
7.4.3. AFG (NID = 01h): PCMCap ...............................................................................................54
7.4.4. AFG (NID = 01h): StreamCap ............................................................................................55
7.4.5. AFG (NID = 01h): InAmpCap .............................................................................................56
7.4.6. AFG (NID = 01h): PwrStateCap .........................................................................................57
7.4.7. AFG (NID = 01h): GPIOCnt ...............................................................................................58
7.4.8. AFG (NID = 01h): OutAmpCap ..........................................................................................58
7.4.9. AFG (NID = 01h): PwrState ...............................................................................................59
7.4.10. AFG (NID = 01h): UnsolResp ..........................................................................................60
7.4.11. AFG (NID = 01h): GPIO ...................................................................................................60
7.4.12. AFG (NID = 01h): GPIOEn ...............................................................................................61
7.4.13. AFG (NID = 01h): GPIODir ..............................................................................................62
7.4.14. AFG (NID = 01h): GPIOWakeEn .....................................................................................63
7.4.15. AFG (NID = 01h): GPIOUnsol ..........................................................................................64
7.4.16. AFG (NID = 01h): GPIOSticky .........................................................................................65
7.4.17. AFG (NID = 01h): SubID ..................................................................................................65
7.4.18. AFG (NID = 01h): GPIOPlrty ............................................................................................66
7.4.19. AFG (NID = 01h): GPIODrive ...........................................................................................67
7.4.20. AFG (NID = 01h): DMic ....................................................................................................68
7.4.21. AFG (NID = 01h): DACMode ...........................................................................................69
7.4.22. AFG (NID = 01h): ADCMode ...........................................................................................70
7.4.23. AFG (NID = 01h): PortUse ...............................................................................................71
7.4.24. AFG (NID = 01h): ComJack .............................................................................................72
7.4.25. AFG (NID = 01h): VSPwrState .........................................................................................73
7.4.26. AFG (NID = 01h): AnaPort ...............................................................................................74
7.4.27. AFG (NID = 01h): AnaBTL ...............................................................................................75
7.4.28. AFG (NID = 01h): AnaBTLStatus .....................................................................................77
7.4.29. AFG (NID = 01h): AnaCapless .........................................................................................77
7.4.30. AFG (NID = 01h): Reset ...................................................................................................80
7.4.31. AFG (NID = 01h): AnaBeep .............................................................................................81
7.5. PortA (NID = 0Ah): WCap ................................................................................................................82
7.5.1. PortA (NID = 0Ah): PinCap ................................................................................................83
7.5.2. PortA (NID = 0Ah): ConLst .................................................................................................84
7.5.3. PortA (NID = 0Ah): ConLstEntry0 ......................................................................................85
7.5.4. PortA (NID = 0Ah): InAmpLeft ............................................................................................85
7.5.5. PortA (NID = 0Ah): InAmpRight .........................................................................................86
7.5.6. PortA (NID = 0Ah): ConSelectCtrl ......................................................................................86
7.5.7. PortA (NID = 0Ah): PwrState .............................................................................................87
7.5.8. PortA (NID = 0Ah): PinWCntrl ............................................................................................87
7.5.9. PortA (NID = 0Ah): UnsolResp ..........................................................................................88
7.5.10. PortA (NID = 0Ah): ChSense ...........................................................................................89
7.5.11. PortA (NID = 0Ah): EAPDBTLLR .....................................................................................89
7.5.12. PortA (NID = 0Ah): ConfigDefault ....................................................................................90
7.6. PortB (NID = 0Bh): WCap ................................................................................................................92
7.6.1. PortB (NID = 0Bh): PinCap ................................................................................................94
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
4
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.6.2. PortB (NID = 0Bh): ConLst .................................................................................................95
7.6.3. PortB (NID = 0Bh): ConLstEntry0 ......................................................................................96
7.6.4. PortB (NID = 0Bh): ConSelectCtrl ......................................................................................96
7.6.5. PortB (NID = 0Bh): PwrState .............................................................................................96
7.6.6. PortB (NID = 0Bh): PinWCntrl ............................................................................................97
7.6.7. PortB (NID = 0Bh): UnsolResp ..........................................................................................98
7.6.8. PortB (NID = 0Bh): ChSense .............................................................................................98
7.6.9. PortB (NID = 0Bh): EAPDBTLLR .......................................................................................99
7.6.10. PortB (NID = 0Bh): ConfigDefault ....................................................................................99
7.7. PortC (NID = 0Ch): WCap .............................................................................................................102
7.7.1. PortC (NID = 0Ch): PinCap ..............................................................................................103
7.7.2. PortC (NID = 0Ch): ConLst ..............................................................................................104
7.7.3. PortC (NID = 0Ch): ConLstEntry0 ....................................................................................105
7.7.4. PortC (NID = 0Ch): InAmpLeft .........................................................................................105
7.7.5. PortC (NID = 0Ch): InAmpRight .......................................................................................106
7.7.6. PortC (NID = 0Ch): ConSelectCtrl ...................................................................................106
7.7.7. PortC (NID = 0Ch): PwrState ...........................................................................................107
7.7.8. PortC (NID = 0Ch): PinWCntrl .........................................................................................107
7.7.9. PortC (NID = 0Ch): UnsolResp ........................................................................................108
7.7.10. PortC (NID = 0Ch): ChSense .........................................................................................109
7.7.11. PortC (NID = 0Ch): EAPDBTLLR ...................................................................................109
7.7.12. PortC (NID = 0Ch): ConfigDefault ..................................................................................110
7.8. PortD (NID = 0Dh): WCap .............................................................................................................113
7.8.1. PortD (NID = 0Dh): PinCap ..............................................................................................114
7.8.2. PortD (NID = 0Dh): ConLst ..............................................................................................115
7.8.3. PortD (NID = 0Dh): ConLstEntry0 ....................................................................................116
7.8.4. PortD (NID = 0Dh): ConSelectCtrl ...................................................................................116
7.8.5. PortD (NID = 0Dh): PwrState ...........................................................................................117
7.8.6. PortD (NID = 0Dh): PinWCntrl .........................................................................................118
7.8.7. PortD (NID = 0Dh): EAPDBTLLR .....................................................................................118
7.8.8. PortD (NID = 0Dh): ConfigDefault ....................................................................................118
7.9. (NID = 0Eh): Vendor Reserved .....................................................................................................122
7.10. PortF (NID = 0Fh): WCap ............................................................................................................123
7.10.1. PortF (NID = 0Fh): PinCap .............................................................................................124
7.10.2. PortF (NID = 0Fh): ConLst .............................................................................................125
7.10.3. PortF (NID = 0Fh): ConLstEntry0 ...................................................................................126
7.10.4. PortF (NID = 0Fh): InAmpLeft ........................................................................................126
7.10.5. PortF (NID = 0Fh): InAmpRight ......................................................................................127
7.10.6. PortF (NID = 0Fh): ConSelectCtrl ..................................................................................127
7.10.7. PortF (NID = 0Fh): PwrState ..........................................................................................128
7.10.8. PortF (NID = 0Fh): PinWCntrl ........................................................................................128
7.10.9. PortF (NID = 0Fh): UnsolResp .......................................................................................129
7.10.10. PortF (NID = 0Fh): ChSense ........................................................................................130
7.10.11. PortF (NID = 0Fh): EAPDBTLLR .................................................................................130
7.10.12. PortF (NID = 0Fh): ConfigDefault .................................................................................131
7.11. (NID = 10h): Vendor Reserved ....................................................................................................134
7.12. DMic0 (NID = 11h): WCap ...........................................................................................................135
7.12.1. DMic0 (NID = 11h): PinCap ...........................................................................................136
7.12.2. DMic0 (NID = 11h): InAmpLeft .......................................................................................137
7.12.3. DMic0 (NID = 11h): InAmpRight ....................................................................................138
7.12.4. DMic0 (NID = 11h): PwrState .........................................................................................138
7.12.5. DMic0 (NID = 11h): PinWCntrl .......................................................................................139
7.12.6. DMic0 (NID = 11h): UnsolResp ......................................................................................140
7.12.7. DMic0 (NID = 11h): ChSense ........................................................................................140
7.12.8. DMic0 (NID = 11h): ConfigDefault .................................................................................141
7.13. (NID = 12h): Vendor Reserved ....................................................................................................144
7.14. DAC0 (NID = 13h): WCap ............................................................................................................145
7.14.1. DAC0 (NID = 13h): Cnvtr ...............................................................................................146
7.14.2. DAC0 (NID = 13h): OutAmpLeft .....................................................................................147
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
5
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.14.3. DAC0 (NID = 13h): OutAmpRight ..................................................................................148
7.14.4. DAC0 (NID = 13h): PwrState .........................................................................................148
7.14.5. DAC0 (NID = 13h): CnvtrID ............................................................................................149
7.14.6. DAC0 (NID = 13h): EAPDBTLLR ...................................................................................150
7.15. DAC1 (NID = 14h): WCap ............................................................................................................150
7.15.1. DAC1 (NID = 14h): Cnvtr ...............................................................................................152
7.15.2. DAC1 (NID = 14h): OutAmpLeft .....................................................................................153
7.15.3. DAC1 (NID = 14h): OutAmpRight ..................................................................................153
7.15.4. DAC1 (NID = 14h): PwrState .........................................................................................154
7.15.5. DAC1 (NID = 14h): CnvtrID ............................................................................................155
7.15.6. DAC1 (NID = 14h): EAPDBTLLR ...................................................................................155
7.16. ADC0 (NID = 15h): WCap ............................................................................................................156
7.16.1. ADC0 (NID = 15h): ConLst ............................................................................................157
7.16.2. ADC0 (NID = 15h): ConLstEntry0 ..................................................................................158
7.16.3. ADC0 (NID = 15h): Cnvtr ...............................................................................................158
7.16.4. ADC0 (NID = 15h): ProcState ........................................................................................159
7.16.5. ADC0 (NID = 15h): PwrState .........................................................................................160
7.16.6. ADC0 (NID = 15h): CnvtrID ............................................................................................161
7.17. ADC1 (NID = 1Bh): WCap ...........................................................................................................161
7.17.1. ADC1 (NID = 1Bh): ConLst ............................................................................................163
7.17.2. ADC1 (NID = 1Bh): ConLstEntry0 ..................................................................................163
7.17.3. ADC1 (NID = 1Bh): Cnvtr ...............................................................................................164
7.17.4. ADC1 (NID = 1Bh): ProcState ........................................................................................165
7.17.5. ADC1 (NID = 1Bh): PwrState .........................................................................................166
7.17.6. ADC1 (NID = 1Bh): CnvtrID ...........................................................................................167
7.18. ADC0Mux (NID = 17h): WCap .....................................................................................................168
7.18.1. ADC0Mux (NID = 17h): ConLst ......................................................................................169
7.18.2. ADC0Mux (NID = 17h): ConLstEntry4 ...........................................................................170
7.18.3. ADC0Mux (NID = 17h): ConLstEntry0 ...........................................................................170
7.18.4. ADC0Mux (NID = 17h): OutAmpCap .............................................................................171
7.18.5. ADC0Mux (NID = 17h): OutAmpLeft ..............................................................................172
7.18.6. ADC0Mux (NID = 17h): OutAmpRight ...........................................................................172
7.18.7. ADC0Mux (NID = 17h): ConSelectCtrl ...........................................................................173
7.18.8. ADC0Mux (NID = 17h): PwrState ..................................................................................173
7.18.9. ADC0Mux (NID = 17h): EAPDBTLLR ............................................................................174
7.19. ADC1Mux (NID = 18h): WCap .....................................................................................................175
7.19.1. ADC1Mux (NID = 18h): ConLst ......................................................................................177
7.19.2. ADC1Mux (NID = 18h): ConLstEntry4 ...........................................................................177
7.19.3. ADC1Mux (NID = 18h): ConLstEntry0 ...........................................................................178
7.19.4. ADC1Mux (NID = 18h): OutAmpCap .............................................................................178
7.19.5. ADC1Mux (NID = 18h): OutAmpLeft ..............................................................................179
7.19.6. ADC1Mux (NID = 18h): OutAmpRight ...........................................................................179
7.19.7. ADC1Mux (NID = 18h): ConSelectCtrl ...........................................................................180
7.19.8. ADC1Mux (NID = 18h): PwrState ..................................................................................180
7.19.9. ADC1Mux (NID = 18h): EAPDBTLLR ............................................................................181
7.20. (NID = 19h): Vendor Reserved ....................................................................................................182
7.21. (NID = 1Ah): Vendor Reserved ....................................................................................................182
7.22. Mixer (NID = 1Bh): WCap ............................................................................................................183
7.22.1. Mixer (NID = 1Bh): InAmpCap .......................................................................................184
7.22.2. Mixer (NID = 1Bh): ConLst .............................................................................................185
7.22.3. Mixer (NID = 1Bh): ConLstEntry4 ..................................................................................185
7.22.4. Mixer (NID = 1Bh): ConLstEntry0 ..................................................................................186
7.22.5. Mixer (NID = 1Bh): InAmpLeft0 ......................................................................................186
7.22.6. Mixer (NID = 1Bh): InAmpRight0 ...................................................................................187
7.22.7. Mixer (NID = 1Bh): InAmpLeft1 ......................................................................................187
7.22.8. Mixer (NID = 1Bh): InAmpRight1 ...................................................................................188
7.22.9. Mixer (NID = 1Bh): InAmpLeft2 ......................................................................................188
7.22.10. Mixer (NID = 1Bh): InAmpRight2 .................................................................................189
7.22.11. Mixer (NID = 1Bh): InAmpLeft3 ....................................................................................189
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
6
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.22.12. Mixer (NID = 1Bh): InAmpRight3 .................................................................................190
7.22.13. Mixer (NID = 1Bh): InAmpLeft4 ....................................................................................190
7.22.14. Mixer (NID = 1Bh): InAmpRight4 .................................................................................191
7.22.15. Mixer (NID = 1Bh): InAmpLeft5 ....................................................................................191
7.22.16. Mixer (NID = 1Bh): InAmpRight5 .................................................................................192
7.22.17. Mixer (NID = 1Bh): PwrState ........................................................................................192
7.23. MixerOutVol (NID = 1Ch): WCap .................................................................................................193
7.23.1. MixerOutVol (NID = 1Ch): ConLst ..................................................................................195
7.23.2. MixerOutVol (NID = 1Ch): ConLstEntry0 .......................................................................195
7.23.3. MixerOutVol (NID = 1Ch): OutAmpCap .........................................................................196
7.23.4. MixerOutVol (NID = 1Ch): OutAmpLeft ..........................................................................197
7.23.5. MixerOutVol (NID = 1Ch): OutAmpRight .......................................................................197
7.23.6. MixerOutVol (NID = 1Ch): PwrState ..............................................................................198
7.24. (NID = 1Dh): Vendor Reserved ....................................................................................................199
7.25. (NID = 1Eh): Vendor Reserved ....................................................................................................199
7.26. (NID = 1Fh): Vendor Reserved ....................................................................................................199
7.27. (NID = 20h): Vendor Reserved ....................................................................................................199
7.28. DigBeep (NID = 21h): WCap .......................................................................................................200
7.28.1. DigBeep (NID = 21h): OutAmpCap ................................................................................201
7.28.2. DigBeep (NID = 21h): OutAmpLeft ................................................................................201
7.28.3. DigBeep (NID = 21h): PwrState .....................................................................................202
7.28.4. DigBeep (NID = 21h): Gen .............................................................................................203
7.28.5. DigBeep (NID = 21h): Gain ............................................................................................203
7.29. AdvancedFunctions (NID = 22h): WCap ......................................................................................204
7.29.1. AdvancedFunctions (NID = 22h): Cntrl0 ........................................................................205
8. PINOUT AND PACKAGING .................................................................................................. 219
8.0.1. 40QFN Pin Table .............................................................................................................220
8.0.2. 40QFN Package Outline and Package Dimensions ........................................................221
8.1. Standard Reflow Profile Data ........................................................................................................222
9. DISCLAIMER ......................................................................................................................... 223
10. DOCUMENT REVISION HISTORY ..................................................................................... 224
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
7
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
LIST OF FIGURES
Figure 1. Multi-channel capture ......................................................................................................................17
Figure 2. Multi-channel timing diagram ..........................................................................................................17
Figure 3. HP EAPD Example to be replaced by single pin for internal amp ..................................................21
Figure 4. EAPD implementation .....................................................................................................................21
Figure 5. Single Digital Microphone (data is ported to both left and right channels .......................................23
Figure 6. Stereo Digital Microphone Configuration ........................................................................................24
Figure 7. Analog PC Beep Active ..................................................................................................................25
Figure 8. Analog PC Beep Flow chart ............................................................................................................26
Figure 9. Combo Jack ....................................................................................................................................28
Figure 10. Switching between Normal and Aux Audio Modes .......................................................................32
Figure 11. Aux Audio Playback When Nothing Plugged In (or System is not Docked) ..................................34
Figure 12. Aux Audio Playback When System Headphones are Plugged In .................................................34
Figure 13. Aux Audio Playback when the System is Docked and Headphones are Plugged In ....................35
Figure 14. HD Audio Bus Timing ....................................................................................................................42
Figure 15. Functional Block Diagram .............................................................................................................44
Figure 16. Widget Diagram ............................................................................................................................45
Figure 17. Port Configurations .......................................................................................................................46
Figure 18. 40QFN Pin Assignment ..............................................................................................................219
Figure 19. 40QFN Package Diagram ...........................................................................................................221
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
8
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
LIST OF TABLES
Table 1. Port Functionality .............................................................................................................................11
Table 2. Analog Output Port Behavior ...........................................................................................................12
Table 3. 48pin Jack Detect ............................................................................................................................13
Table 4. Power Management .........................................................................................................................14
Table 5. Example channel mapping ...............................................................................................................17
Table 7. EAPD Pin Mode Select ....................................................................................................................19
Table 8. Control bit descriptions for BTL amplifier and Headphone amplifier enable configurations .............19
Table 9. BTL Amp Enable Configuration ........................................................................................................19
Table 11. EAPD Analog PC_Beep behavior ..................................................................................................20
Table 12. EAPD Behavior ..............................................................................................................................20
Table 10. Headphone Amp Enable Configuration ..........................................................................................20
Table 13. Valid Digital Mic Configurations .....................................................................................................22
Table 14. DMIC_CLK and DMIC_0 Operation During Power States .............................................................22
Table 15. Electrical Specification: Maximum Ratings ...................................................................................37
Table 16. Recommended Operating Conditions ............................................................................................37
Table 17. 92HD99 Analog Performance Characteristics ...............................................................................38
Table 18. Class-D BTL Amplifier Performance ..............................................................................................41
Table 19. Capless Headphone Supply ..........................................................................................................42
Table 20. HD Audio Bus Timing .....................................................................................................................42
Table 21. Digital Mic timing ............................................................................................................................43
Table 22. GPIO Characteristics .....................................................................................................................43
Table 23. Pin Configuration Default Settings .................................................................................................47
Table 24. Command Format for Verb with 4-bit Identifier ..............................................................................48
Table 25. Command Format for Verb with 12-bit Identifier ............................................................................48
Table 26. Solicited Response Format ............................................................................................................48
Table 27. Unsolicited Response Format ........................................................................................................48
Table 28. Widget List .....................................................................................................................................49
Table 29. 40QFN Pin Description ................................................................................................................220
Table 30. Standard Reflow Profile ...............................................................................................................222
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
9
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
1. DESCRIPTION
1.1.
Overview
The 92HD99 audio CODEC provides stereo 24- bit, full duplex resolution supporting sample rates up
to 192kHz by the DAC and ADC.
An integrated BTL stereo amplifier is ideal for driving 4ohm or 8ohm integrated speakers in mobile
and ultra-mobile computers. For desktop computers or mobile computers using only one speaker,
the BTL output stage may be configured to support a single mono speaker.
Port presence detect capabilities allow the CODEC to detect when audio devices are connected to
the CODEC. The fully parametric Internal EQ can be initiated upon headphone jack insertion and
removal for protection of notebook speakers.
The 92HD99 audio CODEC operates with a 3.3V digital supply and a 5V (4.75V allowed when using
external voltage regulator) analog supply. It allows for 1.5V and 3.3V HDA signaling; the correct signalling level is selected dynamically based on the power supply voltage on the DVDD-IO pin.
The 92HD99 audio CODEC is offered in a 40-pin QFN Environmental (ROHS) package.
1.2.
Orderable Part Numbers
92HD99B1X5NDGXyyX
92HD99B2X5NDGXyyX
92HD99B3X5NDGXyyX
92HD99B4X5NDGXyyX
HDA 3.3V, Aux mode
HDA 3.3V, No Aux mode
HDA 1.5V, Aux mode
HDA 1.5V, No Aux mode
yy = silicon stepping/revision, contact sales for current data.
Add an “8” to the end for tape and reel delivery.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
10
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2. DETAILED DESCRIPTION
2.1.
Port Functionality
Multi-function (Input/Output) ports allow for the highest possible flexibility. 7 bi-directional ports, 2 are
headphone capable, support a wide variety of consumer desktop and mobile system use models.
•
Port A supports
• Headphone Out
• Line Out
• Line Input
• Mic with 0/10/20/30 dB Boost
•
Port B supports
• Capless Headphone Out
• Capless Line Out
•
Port C
• Line In
• Line Out
• Mic with 0/10/20/30 dB Boost
•
Port D supports
• BTL stereo out
•
Port F supports
• Line In
• Line Out
• Mic with 0/10/20/30 dB Boost
Pins 40-QFN
Port
Input
Output
Headphone
22/23
A
Yes
Yes
Yes
Yes
Yes
Yes
Yes
25/26
B
15/16
C
34/35/37/38
D
13/14
F
Yes
3 (CLK=2)
DMIC0
Yes
Yes
Yes
BTL
Mic Bias
(Vref pin)
Input
boost amp
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Table 1. Port Functionality
2.1.1.
Port Characteristics
Universal (Bi-directional) jacks are supported on ports A,C, and F. Ports A and B are designed to
drive 32 ohm (nominal) headphones or a 10K (nominal) load. Line Level outputs are intended to
drive an external 10K load (nominal) and an on board shunt resistor of 20-47K (nominal). However,
applications may support load impedances of 5K ohms and above. Input ports are 50K (nominal) at
the pin.
DAC full scale outputs and intended full scale input levels are 1V rms at 5V. Line output ports and
Headphone output ports on the 92HD99 codec may be configured for +3dBV full scale output levels
by using a vendor specific verb.
Output ports are always on to prevent pops/clicks associated with charging and discharging output
coupling capacitors. This maintains proper bias on output coupling caps even in power state D3 as
long as AVDD is available. Unused ports should be left unconnected. When updating existing
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
11
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
designs to use the 92HD99 codec, ensure that there are no conflicts between the output ports on the
codec and existing circuitry.
AFG
Power
State
Input Output Used as output
Enable Enable for DAC/Mixer
Used as output
for analog
PC_Beep
Used as
input for
ADC, mixer
Port Behavior
Yes
Not allowed. Port is active as input.
No
Not allowed. Inactive (Power Down) - Port keeps
output coupling caps charged if port uses caps.
1
1
Don't care
Don't care
1
0
NA
NA
Yes
Active - Port enabled as input
1
0
NA
NA
No
Inactive (Power Down) - Port keeps output coupling
caps charged if port uses caps.
0
1
currently used by DAC, mixer,
beep, or is traditional line or
headphone output
0
1
not currently used by DAC, mixer,
beep and is capless HP/BTL port
0
0
NA
NA
NA
Inactive (Power Down) - Port keeps output coupling
caps charged if port uses caps.
1
1
NA
NA
Don't care
Not allowed. Inactive (Power Down) - Port keeps
output coupling caps charged if port uses caps.
1
0
NA
NA
Don't care
Inactive (Power Down) - Port keeps output coupling
caps charged if port uses caps.
0
1
currently used by DAC, mixer,
beep, or is traditional line or
headphone output
Don't care
Low power state. If enabled, Beep will output from
the port
0
1
not currently used by DAC, mixer,
beep and is capless HP/BTL port
Don't care
Inactive (Power Down)
0
0
Don't care
Inactive (Power Down) - Port keeps output coupling
caps charged if port uses caps.
D3cold
-
-
Inactive (lower power) - Port keeps output coupling
caps charged if port uses caps.
D4
-
-
Inactive (lower power) - Port keeps output coupling
caps charged if port uses caps.
D5
-
-
Off - Charge on coupling caps (if used) will not be
maintained.
D0-D2
D3
NA
NA
Active - Port enabled as output
NA
Inactive (Power Down)
Table 2. Analog Output Port Behavior
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
12
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2.1.2.
Vref_Out
Ports C, & A support Vref_Out pins for biasing electret cartridge microphones. Settings of 80%
AVDD, 50% AVDD, GND, and Hi-Z are supported. Attempting to program a pin widget control with a
reserved or unsupported value will cause the associated Vref_Out pin to assume a Hi-Z state and
the pin widget control Vref_En field will return a value of ‘000’ (Hi-Z) when read.
2.1.3.
Jack Detect
Plugs inserted to a jack on Ports A, B, C are detected using SENSE_A. Plugs inserted to a jack on
Port F, DMIC0, are detected using SENSE_B. Per HDA015-B, the detection circuit operates when
the CODEC is in D0 - D3 and can also operate if both the CODEC and Controller are in D3 (no bus
clock.) Jack detection requires that all supplies (analog and digital) are active and stable. When
AVDD is not present, the value reported in the pin widget is invalid.
When the HD Audio bus is in a low power state (reset asserted and clock stopped) the CODEC will
generate a Power State Change Request when a change in port connectivity is sensed and then
generate an unsolicited response after the HD Audio link has been brought out of a low power state
and the device has been enumerated. Per HDA015-B, this will take less than 10mS.
The following table summarizes the proper resistor tolerances for different analog supply voltages..
AVdd Nominal
Voltage (+/- 5%)
Resistor Tolerance
Pull-Up
Resistor Tolerance
SENSE_A/B
4.75V
1%
1%
Resistor
SENSE_A
SENSE_B
39.2K
PORT A (HP0)
20.0K
PORT B (HP1)
PORT F
10.0K
PORT C
DMIC0
Pull-up to AVDD
Pull-up to AVDD
5.11K
2.49K
Table 3. 48pin Jack Detect
See reference design for more information on Jack Detect implementation.
2.2.
Mixer
The mixer supports independent gain (-34.5 to +12dB in 1.5dB steps) on each input as well as independent mutes on each input. The following inputs are available:
•
Port A
•
Port C
•
Port F
•
DAC 0
•
DAC 1
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
13
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2.3.
ADC Multiplexers
The codec implements 2 ADC input multiplexers. These multiplexers incorporate the ADC record
gain function :(-16 to +30dB gain in 1dB steps) as an output amp and allow a preselection of one of
below possible inputs:
2.4.
•
Port A
•
Port C
•
Port F
•
Mixer Output
•
DMIC 0
Power Management
The HD Audio specification defines power states, power state widgets, and power state verbs.
Power management is implemented at several levels. The Audio Function Group (AFG) , all converter widgets, and all pin complexes support the power state verb F05/705. Converter widgets are
active in D0 and inactive in D1-D3.
The following table describes what functionality is active in each power state.
Function
D0
D11
D2
D3
D3cold
Vendor
Specific D4
Vendor
SpecificD5
Digital Microphone inputs
On
Off
Off
Off
Off
Off
Off
DAC
On
Off
Off
Off
Off
Off
Off
D2S
On
Off
Off
Off
Off
Off
Off
ADC
On
Off
Off
Off
Off
Off
Off
ADC Volume Control
On
Off
Off
Off
Off
Off
Off
Ref ADC
On
Off
Off
Off
Off
Off
Off
Analog Clocks
On
Off
Off
Off
Off
Off
Off
On
On
Off
Off
Off
Off
GPIO pins
On
On
On
On5
VrefOut Pins
On
On
Off
Off
Input Boost
On
On
Off
Off
Off
Off
Off
Analog mixer
On
On
Off
Off
Off
Off
Off
Mixer Volumes
On
On
Off
Off
Off
Off
Off
Analog PC_Beep
On
On
On
On
Off
Off
Off
Digital PC_Beep
On
On
On
On5
Off
Off
Off
Lo/HP Amps
On
On
On
Low Drive2
Low Drive2
Low Drive2
Off
Cap-less HP Amps
On
On
On
Low Drive2
Low Drive2
Low Drive2
Off
On
Low
Drive2
Off
Off
Off
Low
Drive3
Low Drive
Low Drive
Off
Off
Off
Off
BTL Amp
1.
On
On
VAG amp
On
On
On
Port Sense
On
On
On
On4
Reference Bias generator
On
On
On
On
On
On
Off
Reference Bandgap core
On
On
On
On
On
On
Off
HD Audio-Link
On
On
On
On5
Limited
Off
Off
Table 4. Power Management
No DAC or ADC streams are active. Analog mixing and loop thru are supported.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
14
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2.
VAG is kept active when ports are disabled or in D3/D3cold/D4. PC_Beep is supported in D3 but may be attenuated and
distorted depending on load impedance. The codec will shut down the capless headphone amplifiers and BTL amplifier in
D3 and below. In D3, Hendrix/Kaveri will turn on the BTL and Capless amplifiers if activity is detected on the PC_BEEP
input and analog PC_Beep is enabled.
3.
VAG is always ramped up and down gradually, except in the case of a sudden power removal. VAG is active in D2/D3 but
in a low power state.
4.
Both AVDD and DVDD must be available for Port Sense to operate.
5.
Not active if BITCLK is not running (Controller in D3), but can signal power state change request (PME)
The D3-default state is available for HD Audio compliance. The programmable values, exposed via
vendor-specific settings, are under IDT Device Driver control for further power reduction. The analog
mixer, line and headphone amps, port presence detect, and internal references may be disabled
using vendor specific verbs. Use of these vendor specific verbs will cause pops.
The default power state for the Audio Function Group after reset is D3.
2.5.
AFG D0
The AFG D0 state is the active state for the device. All functions are active if their power state (if they
support power management at their node level) has been set to D0.
2.6.
AFG D1
D1 is a lower power mode where all converter widgets are disabled. Analog mixer and port functions
are active. The part will resume from theD1 to theD0 state within 1 mS.
2.7.
AFG D2
The D2 state further reduces power by disabling the mixer and port functions. The port amplifiers
and internal references remain active to keep port coupling caps charged and the system ready for a
quick resume to either the D1 or D0 state. The part will resume from the D2 state to the D0 state
within 2mS.
2.8.
AFG D3
The D3-default state is available for HD Audio compliance. All converters are shut down. Port amplifiers and references are active but in a low power state to prevent pops. Resume times may be longer than those from D2, but still less than 10mS to meet Intel low power goals. The default power
state for the Audio Function Group after power is applied is D3.
While in AFG D3, the HD Audio controller may be in a D0 state (HD Audio bus active) or in a D3
state (HD Audio bus held in reset with no Bit_Clk, SData_Out, or Sync activity.) The expected behavior is as follows (see the HDA015-B section for more information):
Function
HDA Bus active
Port Presence Detect state change Unsolicited Response
GPIO state change
Unsolicited Response
2.8.1.
HDA Bus stopped
Wake Event followed by an unsolicited response
Wake Event followed by an unsolicited response
AFG D3cold
The D3cold power state is the lowest power state available that does not use vendor specific verbs.
While in D3cold, the CODEC will still respond to bus requests to revert to a higher power state (dou-
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
15
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
ble AFG reset, link reset). However, audio processing, port presence detect, and other functions are
disabled. Per the HD Audio bus HDA015-B, the D3cold state is intended to be used just prior to
removing power to the CODEC. Typically, power will be removed within 200mS. However, the codec
may exit from the D3cold state by generating 2, back-to-back, AFG reset events. Resume time from
D3cold is less than 200mS.
2.9.
Vendor Specific Function Group Power States D4/D5
The codec introduces vendor specific power states. A vendor defined verb is added to the Audio
Function Group that combines multiple vendor specific power control bits into logical power states
for use by the audio driver. The 2 states defined offer lower power than the 5 existing states defined
in the HD Audio specification and HDA015-B. The Vendor Specific D4 state provides lower digital
power consumption relative to D3cold by disabling HD Audio link responses. Vendor specific D5 further reduces power consumption on the digital supply by turning off GPIO drivers, and reduces analog power consumption by turning off all analog circuitry except for reset circuits.
States D4/D5 are not entered until D3cold has been requested so are actually D3cold options rather
than true, independent, power states. Software can pre-program the D4 or D5 state as a re-definition
of how the part will behave when the D3cold power state is requested or software may enter D3cold,
then set the D4 or D5 before performing the power state get command. The preferred method is to
request D3cold, then select D4 or D5 as desired.This will reduce the severity of pops encountered
when entering D4 or D5.
Both power states require a link reset or removal of DVDD to exit.
The CODEC may pop when using these verbs and transition times to an active state (D1 or D0 for
example) may take several seconds.
2.10. Low-voltage HDA Signaling
The codec is compatible with either 1.5V or 3.3V HDA bus signaling; in the 48QFN package the voltage selection is done dynamically based on the input voltage of DVDD_IO.
DVDD_IO is currently not a logic configuration pin, but rather provides the digital power supply to be
used for the HDA bus signals.
When in 1.5V mode, the codec can correctly decode BITCLK, SYNC, RESET# and SDO as they
operate at 1.5V; additionally it will drive SDI and SDO at 1.5V. None of the GPIOs are affected, as
they always function at their nominal voltage (DVDD or AVDD).
2.11. Multi-channel capture
The capability to assign multiple “ADC Converters” to the same stream is supported to meet the
microphone array requirements of Vista and future operating systems. Single converter streams are
still supported this is done by assigning unique non zero Stream IDs to each converter. All capture
devices (ADCs 0 and 1) may be used to create a multi-channel input stream. There are no restrictions regarding digital microphones.
The ADC Converters can be associated with a single stream as long the sample rate and the bits per
sample are the same. The assignment of converter to channel is done using the “CnvtrID” widget
and is restricted to even values. The ADC converters will always put out a stereo sample and therefore require 2 channels per converter.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
16
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
The stream will not be generated unless all entries for the targeted converters are set identically, and
the total number of assigned converter channels matches the value in the NmbrChan field. These
are listed the “Multi-Converter Stream Critical Entries.” table.
An example of a 4 Channel Steam with ADC0 supplying channels 0&1 and ADC1 supplying channels 2 & 3 is shown below. A 4 Channel stream can be created by assigning the same non-zero
stream id “Strm= N” to both ADC0 and ADC1. The sample rates must be set the same and the number of channels must be set to 4 channels “NmbrChan = 0011”.
ADC1 CnvtrID
(NID = 0x08)
[3:0]
ADC0 CnvtrID
Ch = 2
(NID = 0x07)
[3:0]
Ch=0
Table 5. Example channel mapping
Figure 1. Multi-channel capture
ADC0.CnvrtID.Channel = 0
ADC1.CnvrtID.Channel = 2
ADC0.CnvrtID.Channel = 2
ADC1.CnvrtID.Channel = 0
Stream ID
Data
Length
ADC0
Left Channel
ADC0
Right Channel
ADC1
Left Channel
ADC1
Right Channel
Stream ID
Data
Length
ADC1
Left Channel
ADC1
Right Channel
ADC0
Left Channel
ADC0
Right Channel
The following figure describes the bus waveform for a 24-bit, 48KHz capture stream with ID set to 1.
Figure 2. Multi-channel timing diagram
BITCLK
SDI
0
0
0
1
0
0
STREAM ID
1
1
DATA LENGTH
0
0
ADC0
L23
ADC0
L0
ADC0
R23
LEFT
STREAM TAG
ADC0
R0
ADC1
L23
RIGHT
ADC1
L0
ADC1
R23
LEFT
ADC0
ADC1
R0
RIGHT
ADC1
DATA BLOCK
ADC[1:0] Cnvtr
Bit Number
Sub Field Name
[15]
StrmType
[14]
FrmtSmplRate
Description
Stream Type (TYPE):
0: PCM
1: Non-PCM (not supported)
Sample Base Rate
0= 48kHz
1=44.1KHz
Table 6: Mult-channel
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
17
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
[13:11]
SmplRateMultp
[10:8]
SmplRateDiv
[6:4]
BitsPerSmpl
[3:0]
NmbrChan
[7:4]
Strm
[3:0]
Ch
Sample Base Rate Multiple
000=48kHz/44.1kHz or less
001= x2
010= x3 (not supported)
011= x4 192kHz only, 176.4 not supported
100-111= Reserved
Sample Base Rate Divisor
000= Divide by 1
001= Divide by 2 (not supported)
010= Divide by 3 (not supported)
011= Divide by 4 (not supported)
100= Divide by 5 (not supported)
101= Divide by 6 (not supported)
110= Divide by 7 (not supported)
111= Divide by 8 (not supported)
Bits per Sample
000= 8 bits (not supported)
001= 16 bits
010= 20 bits
011= 24 bits
100-111= Reserved
Number of Channels
Number of channels for this stream in each “sample
block” of the “packets” in each “frame” on the link.
0000=1 channel (not supported)
0001 = 2 channels
…
1111= 16 channels.
Software-programmable integer representing link
stream ID used by the converter widget. By convention stream 0 is reserved as unused.
Integer representing lowest channel used by converter.
0 and 2 are valid Entries
If assigned to the same stream, one ADC must be
assigned a value of 0 and the other ADC assigned a
value of 2.
Table 6: Mult-channel
2.12. EAPD
The EAPD pin (pin 47) is a dedicated, bi-directional control pin. Although named External Amplifier
Power Down (EAPD) by the HD Audio specification, this pin operates as an external amplifier power
up signal. The EAPD value is reflected on the EAPD pin; a 1 causes the external amplifier to power
up (equivalent to D0), and a 0 causes it to power down (equivalent to D3.) When the EAPD value =
1, the EAPD pin must be placed in a state appropriate to the current power state of the associated
Pin Widget even though the EAPD value (in the register) may remain 1. The default state of this pin
is 0 (driving low.) The pin defaults to an open-drain configuration (an external pull-up is recommended.)
Per the HD Audio specification and HDA015-B, multiple ports may control EAPD. The EAPD pin
assumes the highest power state of all the the EAPD bits in all of the pin complexes. The default
value of EAPD is 1 (powered on), but the FG power state will override and the pin will be low. A port
will request External Amp Power Up when its power state is active (FG and pin widget power state is
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
18
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
D1 or D0) or (Analog PC_Beep is enabled and port is enabled as an output) and the port’s EAPD bit
is set to 1. The state of the EAPD pin (unless configured as an input or held low by an external circuit
when configured as an open drain output) will be the logical OR of the external amp power up
requests from all ports.
By default, the EAPD pin also functions as the Mute#/ShutDown# input for the internal BTL amplifier.
In this mode, a low value at the pin (either due to internal EAPD being 0, or to an external entity forcing the pin low) will cause the internal BTL amplifier to mute or enter a low power state depending on
the amplifier configuration. (See below)
Vendor specific verbs are available to configure this pin. These verbs retain their values across link
and single function group resets but are set to their default values by a power on reset:
MODE1
MODE0
EAPD Pin Function
Description
0
0
Open Drain I/O
Value at pin is wired-AND of EAPD bit and external signal.(default)
0
1
CMOS Output
Value of EAPD bit in pin widget is forced at pin
1
0
CMOS Input
External signal controls internal amps. EAPD bit in pin widget ignored
1
1
CMOS Input
External signal controls internal amps. EAPD bit in pin widget ignored
Table 7. EAPD Pin Mode Select
Control Flag
Description
EAPD PIN MODE 1:0
Defines if EAPD pin is used as input, output, or bi-directional port (Open Drain)
BTL/HP SD
0 = Amp controlled by EAPD pin only (default) / 1 = Amp controlled by power state (pin and FG) only
BTL/HP SD MODE
0 = Amp will mute when disabled. / 1 = Amp will shut down (enter a low power state) when disabled (default
for YA forward)
BTL/HP SD INV
0 = AMP will power down (or mute) when EAPD pin is low (default) / 1 = Amp will power down (or mute)
when EAPD pin is high.
Table 8. Control bit descriptions for BTL amplifier and Headphone amplifier enable configurations
BTL SD
BTL SD
MODE
BTL SD INV
EAPD Pin
State
BTL Amp State
0
0
0
0
Amplifier is mute (default1)
0
0
0
1
Amplifier is active
0
0
1
0
Amplifier is active
0
0
1
1
Amplifier is mute
0
1
0
0
Amplifier is in a low power state
0
1
0
1
Amplifier is active
0
1
1
0
Amplifier is active
0
1
1
1
Amplifier is in a low power state
1
0
NA
NA
Amplifier follows pin/function group power state and will mute when disabled
1
1
NA
NA
Amplifier follows pin/function group power state and will enter a low power
state when disabled
Table 9. BTL Amp Enable Configuration
1.
EAPD bit is set to one by default but the EAPD state is 0 after power-on reset because the function group is not in D0. The state after
a single or double function group reset will be compliant with HDA015-B.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
19
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
1.
HP SD
HP SD
MODE
HP SD INV
EAPD Pin
State
Headphone Amp State
0
0
0
0
Amplifier is mute (default1)
0
0
0
1
Amplifier is active
0
0
1
0
Amplifier is active
0
0
1
1
Amplifier is mute
0
1
0
0
Amplifier is in a low power state
0
1
0
1
Amplifier is active
0
1
1
0
Amplifier is active
0
1
1
1
Amplifier is in a low power state
1
0
NA
NA
Amplifier follows pin/function group power state and will mute when disabled
1
1
NA
NA
Amplifier follows pin/function group power state and will enter a low power
state when disabled
Table 10. Headphone Amp Enable Configuration
EAPD bit is set to one by default but the EAPD state is 0 after power-on reset because the function group is not in D0. The state after
a single or double function group reset will be compliant with HDA015-B.
Analog
BEEP
enabled
1.
EAPD Pin value1
Description
0
Forced to low when in D2
or D3
Follows description in HD Audio spec. External amplifier is shut down when pin or function
group power state is D2 or D3 independent of value in EAPD bit.
1
Forced low in D2 or D3
unless port is enabled as
output
Power state is ignored if port is enabled as output and port EAPD=1 to allow PC_Beep
support in D2 and D3
Table 11. EAPD Analog PC_Beep behavior
When pin is enabled as Open Drain or CMOS output.
AFG
Power
State
RESET#
Analog
PC_BEEP
Port Power
State
Pin Behavior
D0-D3
Asserted (Low)
-
-
Active low immediately after power on, otherwise the previous
state is retained across FG and link reset events
D0
De-Asserted (High)
-
-
Active - Pin reflects EAPD bit unless held low by external source.
D1
De-Asserted (High)
-
D0-D1
Active - Pin reflects EAPD bit unless held low by external source.
D2
De-Asserted (High)
Disabled
D0-D2
Pin forced low to disable external amp
D2
De-Asserted (High)
Enabled
D0-D2
Active - EAPD Pin high if any port EAPD bit =1 and that port also
enabled as output.
D3
De-Asserted (High)
Disabled
D0-D3
Pin forced low to disable external amp
D3
De-Asserted (High)
Enabled
D0-D3
Active - EAPD Pin high if any port EAPD bit=1 and that port also
enabled as output.
D3cold
De-Asserted (High)
-
-
Pin forced low to disable external amp
D4
De-Asserted (High)
-
-
Pin forced low to disable external amp
D5
De-Asserted (High)
-
-
Pin Hi-Z (off)
Table 12. EAPD Behavior
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
20
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Figure 3. HP EAPD Example to be replaced by single pin for internal amp
HP AUDIO CONTROL BLOCK DIAGRAM
SYNC FROM KBC TO OS
OS
SCAN
CODES
SYNC FROM AUDIO GUI TO KBC
A_EAPD
KBC
MUTE +
UP/DOWN
BUTTONS
GPIO_1
CODEC
A_SD
(MUTE LED ON
SAME BOARD)
SPKR_EN#
SPKR AMP
Figure 4. EAPD implementation
VDD
Internal
Headphone
Amp
Internal BTL
Amp
SD/Mute
SD/Mute
EAPD
SD#
External
Power Amp
EAPD PIN
Control
SMU MUTE
OTHER
CODEC
2.13. Digital Microphone Support
The digital microphone interface permits connection of a digital microphone(s) to the CODEC via the
DMIC0 and DMIC_CLK 3-pin interface. The DMIC0 signals are inputs that carry individual channels
of digital microphone data to the ADC. In the event that a single microphone is used, the data is
ported to both ADC channels. This mode is selected using a vendor specific verb and the left time
slot is copied to the ADC left and right inputs.
The DMIC_CLK output is controllable from 4.704Mhz, 3.528Mhz, 2.352Mhz, 1.176Mhz and is synchronous to the internal master clock. The default frequency is 2.352Mhz.
The DMIC data input is reported as a stereo input pin widgets that incorporate a boost amplifier. The
pin widgets are shown connected to the ADCs through the same multiplexors as the analog ports.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
21
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Although the internal implementation is different between the analog ports and the digital microphones, the functionality is the same. In most cases, the default values for the DMIC clock rate and
data sample phase will be appropriate and an audio driver will be able to configure and use the digital microphones exactly like an analog microphone.
To conserve power, the analog portion of the ADC will be turned off if the D-mic input is selected.
When switching from the digital microphone to an analog input to the ADC, the analog portion of the
ADC will be brought back to a full power state and allowed to stabilize before switching from the digital microphone to the analog input. This should take less than 10mS.
DMIC pin widgets support port presence detect directly using SENSE-B input.
The codec supports the following digital microphone configurations:
Digital
Mics
Data Sample
ADC
Conn.
0
N/A
N/A
No Digital Microphones
0, or 1
Available on either DMIC_0 or DMIC_1
When using a microphone that supports multiplexed operation (2-mics can share a
common data line), configure the microphone for “Left” and select mono operation using
the vendor specific verb.
“Left” D-mic data is used for ADC left and right channels.
0, or 1
Available on either DMIC_0 or DMIC_1, External logic required to support sampling on a
single Digital Mic pin channel on rising edge and second Digital Mic right channel on
falling edge of DMIC_CLK for those digital microphones that don’t support alternative
clock edge (multiplexed output) capability.
1
Single Edge
2
Double Edge on
either DMIC_0 or 1
Notes
Table 13. Valid Digital Mic Configurations
Power State
DMIC Widget
Enabled?
DMIC_CLK
Output
DMIC_0
Notes
D0
Yes
Clock Capable
Input Capable
DMIC_CLK Output is Enabled when DMIC_0 Input Widget is
Enabled. Otherwise, the DMIC_CLK remains Low
D1-D3
Yes
Clock Disabled
Input Disabled
DMIC_CLK is HIGH-Z with Weak Pull-down
D0-D3
No
Clock Disabled
Input Disabled
DMIC_CLK is HIGH-Z with Weak Pull-down
D4
-
Clock Disabled
Input Disabled
DMIC_CLK is HIGH-Z with Weak Pull-down
D5
-
Clock Disabled
Input Disabled
DMIC_CLK is HIGH-Z with Weak Pull-down
Table 14. DMIC_CLK and DMIC_0 Operation During Power States
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
22
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Figure 5. Single Digital Microphone (data is ported to both left and right channels
Off-Chip
On-Chip
DMIC_0
OR
DMIC_1
Digital
Microphone
Single Line In
STEREO
ADC0 or 1
PCM
MUX
Pin
DMIC_CLK
Pin
Stereo Channels
Output
On-Chip
Multiplexer
Single Microphone not supporting multiplexed output.
DMIC_0
Or
DMIC_1
Valid Data
Right
Channel
Valid Data
Valid Data
Left
Channel
DMIC_CLK
Single “Left” Microphone, DMIC input set to mono input mode.
DMIC_0
Or
DMIC_1
Valid Data
Valid Data
Valid Data
Valid Data
Left & Right
Channel
DMIC_CLK
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
23
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Figure 6. Stereo Digital Microphone Configuration
Off-Chip
Digital
Microphones
On-Chip
External
Multiplexer
DMIC_0
Or
DMIC_1
STEREO
ADC0 or 1
PCM
MUX
MUX
Pin
On-Chip
Multiplexer
Stereo Channels
Output
DMIC_CLK
Pin
DMIC_0
Or
DMIC_1
Valid
Data R
Right
Channel
Valid
Data L
Valid
Data R
Valid
Data L
Valid
Data R
Left
Channel
DMIC_CLK
Note: Some Digital Microphone Implementations support data on either edge, therefore, the
external mux may not be required.
2.14. Analog PC-Beep
The codec supports automatic routing of the PC_Beep pin to Port A, Port B, and Port D outputs
when the HD-Link is in reset.
When the link is active (not held in reset) Analog PC-Beep may be enabled manually. Analog
PC_Beep is mixed at the port and only ports enabled as outputs will pass PC_Beep.
Beep activity monitoring is provided when the analog beep path is enabled and the CODEC or amplifier is in a low power state (D3).
The Analog PC Beep input is sampled for 500us every 1ms. If the beep input is high or low
(>200mVpp) for at least 37% of that time, it is considered active. If it is active for less than 7.5% of
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
24
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
that time, it is possibly inactive. If no activity is detected for 64ms (128ms, 256ms and 512ms also
selectable for the idle threshold), then beep is considered inactive.
Figure 7. Analog PC Beep Active
Phase 1: analog beep auto-routing phase in the period after application of DVDD, before the first rising edge of link reset.
Once Analog PCbeep is detected(BEEP_PRESENCE=1) after 64ms delays (after POR (power on
reset)), the Amplifier will be turned on(port_pwd=0, port_output_en=1, there is a timing between
these two signals) and analog_beep_en=1. If BEEP_PRESENCE=0 for longer than the threshold
time, the amplifiers will be turned off to save power and prevent unwanted system noise from being
heard.
Phase 2: When not in phase 1
A. If analog beep function is disabled by driver.
Analog beep auto-detect will also be disabled.
B. If analog beep function is enabled by driver.
Once analog PCbeep is detected(BEEP_PRESENCE=1), analog pc_beep will be enabled
If in D0-D2, enabled simply means muting or un-muting beep to avoid hearing system noise on the
beep input pin but it is acceptable to turn off port amplifiers if not currently used by DACs, mixer, or
beep to save power.
If in D3, enabled means that the necessary amplifiers are turned on so that the beep signal may be
heard on all ports configured as outputs (see analog pc-beep description section above)
All needed amplifiers are enabled until BEEP_PRESENCE=0 for longer than the idle threshold
A flow chart of Analog PC Beep is below.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
25
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
POR
Wait
64mS
IDLE
NO
Link Reset
Active?
NO
NO
Analog
PC_Beep
Enabled?
NO
YES
Activity on Pin?
NO
YES
YES
Turn on
Amplifiers / Enable
Beep Path
YES
Activity on Pin?
Activity on Pin?
NO
NO
Inactivity over
threshold?
YES
Disable Beep
Path / Turn off
Amplifiers
Figure 8. Analog PC Beep Flow chart
2.15. Digital PC-Beep
This block uses an 8-bit divider value to generate the PC beep from the 48kHz HD Audio Sync
pulse. The digital PC_Beep block generates the beep tone on all Pin Complexes that are currently
configured as outputs. The HD Audio spec states that the beep tone frequency = (48kHz HD Audio
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
26
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
SYNC rate) / (4*Divider), producing tones from 47 Hz to 12 kHz (logarithmic scale). Other audio
sources are disabled when digital PC_Beep is active.
It should be noted that digital PC Beep is disabled if the divider = 00h.
PC-Beep may be attenuated and distorted when the CODEC is in D3 depending on the load impedance seen by the output amplifier since all ports are in a low power state while in D3. Load impedances of 10K or larger can support full scale outputs but lower impedance loads will distort unless
the output amplitude is reduced. Digital PC_Beep requires a clock to operate and the CODEC will
prevent the system from stopping the bus clock while in D3 by setting the Clock_Stop_OK bit to 0 to
indicate that the part requires a clock.
2.16. Headphone Drivers
The codec implements both traditional and cap-less headphone outputs. The Microsoft Windows
Logo Program allows up to the equivalent of 100ohms in series. However, an output level of +3dBV
at the pin is required to support 300mV at the jack with a 32ohm load and 1V with a 320 ohm load.
Microsoft allows device and system manufactures to limit output voltages to address EU safety
requirements. (WLP 3.09 - please refer to the latest Windows Logo Program requirements from
Microsoft.) The codec does not support power limiting.
Headphone performance will degrade if more than one port is driving a 32 ohm load.
2.17. BTL Amplifier
An integrated class-D stereo BTL amplifier is provided to directly drive 4 ohm speakers (2W @
4.75V) or 8 ohm speakers (1W @ 4.75V). No external filter is needed for cable runs of 18” or less.
An internal DC blocking filter prevents distortion when the audio source has DC content, and prevents unintentional power consumption when pausing audio playback. The amplifier may be controlled using the EAPD pin (see EAPD section.)
Using a vendor specific verb, the BTL amplifier may be configured to support a mono speaker connected to the L +/- pins. In this mode, the Left and Right audio is mixed and sent to the left output
only. The right channel is turned off to conserve power.
Maximum gain for the BTL amplifier is programmable. The following 4 gain settings relative to a
nominal line output are desired: +6.5dB, +9.5dB, +14.5dB, +16.5dB. Absolute gain may vary and the
suggested accuracy is +/-1.5dB.
This gain is exposed in a vendor specific widget and is intended to mimic the pin programmable gain
implemented in discrete BTL amplifiers commonly used in notebook computers.
The BTL amplifier includes thermal management circuitry. When the CODEC reaches a temperature
of about 140 degrees, the output amplitude of the BTL amp is gradually lowered until the temperature falls below 140. All other functions will remain active if the BTL amplifier is shut down due to die
temperature.
2.18. BTL Amplifier High-Pass Filter
For mobile applications, speakers are often incapable of reproducing low frequency audio and
unable to handle the maximum output power of the BTL amplifier. A high-pass filter is implemented
in the BTL output path to reduce the amount of low frequency energy reaching speakers attached to
the BTL amplifier. This can prevent speaker failure.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
27
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2.18.1.
Filter Description
The high-pass filter is derived from the common biquadratic filter and provides a 12dB/octave roll-off.
The filter may be programmed for a -3dB response at: 100Hz, 200Hz, 300Hz, 400Hz, 500Hz, 750Hz,
1KHz, or 2KHz. The high pass filter is enabled by default with a cut-off frequency of 300Hz. The filter
may be bypassed using the associated verb (processing state verb).
The analog PC_Beep input is not affected by the digital high-pass filter. To ensure that the speakers
attached to the BTL amplifier are not harmed by low frequency audio entering the PC_Beep input, an
external filter must be implemented. Fortunately, it is common practice to implement an attenuation
circuit and DC blocking capacitor at the PC_Beep input. This attenuator/filter is easily adjusted to
restrict low frequency audio. The easiest approach is to reduce the value of the DC blocking capacitor but other approaches are equally effective.
2.19. EQ
There are 5 bands of parametric EQ (bi-quad) per channel. Due to the flexibility of the bi-quad implementation, each filter band may be configured as a high-pass, low-pass, band-pass, high shelving,
low shelving, or other function.
Each band has an independent set of coefficients. A bi-quad filter has 6 coefficients. One coefficient
is normalized to 1 and 5 are programmed into the core. Each band supports up to +15dB boost or up
to -36dB cut.
2.20. Combo Jack Detection
4 conductor (combo) jacks are becoming popular. In the most common implementation the 4 conductor plug has the same mechanical dimensions as a 3 conductor 3.5mm plug but the sleeve portion has been split into two segments:S1 and S2. When a 4-conductor plug (headset) is inserted into
the jack T (Tip) = Left headphone audio, R (Ring) = Right headphone audio, S1 (First half of sleeve)
= microphone input, and S2 (Second half of sleeve) = return (GND). When a 3-conductor plug
(headphones) is inserted into the jack; T=Left audio, R=Right audio, S1=GND, S2=GND. By monitoring the S1 connection to see if it is shorted to ground, we can distinguish between headsets and
headphones. Please note that analog microphone plugs (3-conductor-Lmic/Rmic/GND) and optical
SPDIF plugs can not be supported using this implementation.
M
IC
G
N
D
Figure 9. Combo Jack
Plug insertion is reported on the headphone port using the switch integrated into the jack.
The internal circuit monitors the voltage at the jack to determine if a low impedance load is present.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
28
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Detection of a microphone is not reported unless plug insertion is also detected.
2.21. GPIO
2.21.1.
GPIO Pin mapping and shared functions
GPIO
#
Pin
Supply
0
38
DVDD
YES
IN
50K
1
2
DVDD
YES
CLK
50K
IN
50K
GPI/O
2
3
DVDD
YES
3
38
DVDD
YES
4
20
AVDD
YES
2.21.2.
GPI
GPO
VrefOut
DMIC
VOL
Pull
Up
Pull
Down
50K
YES
50K
Digital Microphone/GPIO Selection
Functions are available on the GPIO0 pin. To determine which function is enabled, the order of precedence is followed:
1. If the GPIOs are enabled, they override Digital Mics
2. If the GPIOs are not enabled through the AFG, then at reset, the pin is pulled low by an internal
pull-down resistor.
3. If the port is enabled as an input, the digital microphones will be used.
4. In the event that the port is enabled as an input and an output, the port will be an output and the
Digital Mic path will be mute.
2.21.3.
Digital Microphone/GPIO Selection
2 functions are available on the DMIC_CLK/GPIO1 (pin 2) and the DMIC_0/GPIO2 (pin 4) pins. To
determine which function is enabled, the order of precedence is followed:
1. If GPIOs are not enabled through the AFG, then at reset, pins 2 and 4 are pulled low by an internal pull-down resistor.
2. If the GPIO 1 is enabled, the 2 DMIC pins become mute (unless programmed for GPIO use) and
pin 2 becomes GPIO with an internal pull-down.
3. If GPIO2 is enabled through the AFG, pin 4 becomes a GPIO and is pulled low by an internal
pull-down resistor.
4. If the port is enabled as an input, the digital microphones will be used.
5. If the port is not enabled as an input or if the pin is configured as a GPIO, the digital microphone
path will be mute.
2.22. HD Audio HDA015-B support
The codec provides complete support for the HDA015-B specification (now DCN) building on the
support already present in previous products. HDA015-B features supported are:
1. Persistence of many configuration options through bus and function group reset.
2. The ability to support port presence detect in D3 even when the HD Audio bus is in a low power
state (no clock.)
3. Fast resume times from low power states: 1ms D1 to D0, 2ms D2 to D0, 10mS D3 to D0.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
29
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
4. Notification if persistent register settings have been unexpectedly reset.
2.23. Digital Core Voltage Regulator
The digital core operates from a 1.8V (10%) supply voltage. Many systems require that the CODEC
use a single 3.3V digital supply, so an integrated regulator is included on die. The regulator uses pin
9, DVDD, as its voltage source. The output of the LDO is connected to pin 1 and the digital core. A
10uF capacitor must be placed on pin 1 for proper load regulation and regulator stability.
The digital core voltage regulator is only dependent on DVDD. DVDDIO may be either 3.3 or 1.5V
and may precede or follow DVDD in sequence. The CODEC digital logic and I/O (unless referenced
to AVDD) will operate in the absence of AVDD. DVDD and AVDD supply sequencing for the application of power and the removal of power is neither defined nor guaranteed. It is common for desktop
systems to supply AVDD from the system standby supply and the CODEC will tolerate, indefinitely,
the condition where AVDD is active but DVDD and DVDDIO are inactive.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
30
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2.24. Aux Audio Support
The CODEC supports an auxiliary audio mode where analog audio is supported by default after
power is supplied with the HD Audio bus disabled. In this mode, an analog input is routed to one of
several output ports depending on jack presence detection.
In addition to shutting of the CODEC BTL and headphone amplifiers when the dock output jack is
used, the BTL amplifier will be disabled when the headphone jacks are used, and the headphone
amplifiers will be disabled when not in use.
2.24.1.
General conditions in Aux Audio Mode:
HD Audio Link is off (RST# is 0, active, and BitClk is 0, inactive. CODEC does not need to monitor
BitClk to enter/exit this mode but must not depend on BitClk to operate.) (Part will enter Aux Audio
Mode immediately on application of power if Aux Audio Mode is enabled as default.)
OR
HD Audio CODEC function group power state is set to D3cold and Aux Audio Mode is enabled.
(Device enters immediately on transition to D3cold and remains in Aux mode until a double AFG
reset event is received or until the next rising edge of RST#)
•
HD Audio CODEC analog and digital supplies are active.
•
Port A connects to the system microphone jack.
•
Port B connects to the system headphone jack.
•
Port C is not used
•
Port D connects to the internal speakers.
•
Port E is connected to the dock Line Out jack/AUX Audio out (it is an output port)
•
Port F is connected to the dock Mic Input jack/AUX Audio In (it is an input port)
•
The digital microphone clock is generated by the CODEC. The DMIC data is converted to PCM
and sent to the Aux Audio Module through the Aux Out port.
•
The System microphone jack (Port A) is available to the auxiliary audio subsystem. Vref_Out will
be enabled when the system Mic is plugged in.
•
EAPD is used to control the power state of the mixer, BTL amplifier, and headphone amplifiers.
The amplifiers are off if EAPD is held low.
•
Internal circuitry will delay enabling (change power state, un-mute, etc.) the output amplifiers a
sufficient amount of time after the application of power or EAPD=1 to prevent pops.
•
Internal circuitry will orchestrate power down (EAPD = 0) to prevent pops.
•
EAPD must be forced low before removing power.
•
No special Dock signal present for the CODEC. Only port presence detect for the dock Line Out
(port E) is used.
•
ECR15b operation does not presents a problem. The CODEC will not enter Aux Audio mode
unless the function group power state is set to D3cold prior to putting the HD Audio interface into
reset (controller D3.)To prevent undesirable behavior (pops, etc.) the bus must not be placed
into reset with the clock stopped unless EAPD is forced low or D3cold has been set. The Enable
bit in the Aux Audio vendor specific verb is provided so firmware or other software can disable
Aux Audio support. The default value of this bit is determined by a bond option and may be
determined by reading the device ID. This bit only returns to its default value when a power on
reset event is generated or when programmed to that value by software.
IDT™ CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
31
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2.24.2.
Entering Aux Audio Mode
Enter AUX mode under two conditions, refer to figure below:
•
When DVDD is powered-up, the value of AUX_enable register is “enabled” (one), and before
link reset is de-asserted (pull high).
•
If AUX_enable is “enabled” (one) and the Power state is D3cold then chip will also enter AUX
mode but the Clock_Stop_OK flag is not required (set to 1 if convenient.). (Note that the part will
enter Aux mode immediately upon transition to D3cold. It is possible to return to normal operation by issuing a double AFG reset if the link is still active.)
Note: At that time, Force Portsense and BTL Amp on when we enter link reset if the AuxAudio bit
is set. If the AuxAudio bit is not set (by bond option or software) then we will not enter Aux Audio
Mode-Portsense and BTL Amp will remain off.
Port F (“dock microphone”) input is routed to Port D (“internal speakers”), Ports B (system headphone port), and Port E (“dock Line Out”) directly. The analog mixer is disabled to reduce power consumption.
Figure 10. Switching between Normal and Aux Audio Modes
DVDD
Dig_POR
Power state
D3
D0
D3
D0
D3 cold
Link_reset
AUX_enable
(register)
Operation
mode
AUX_mode
Normal mode
IDT™ CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
D3 with clock
32
D3 clockless
Normal mode
AUX_mode
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2.24.3.
“Playback Path” Port Behavior (AnaIog I/O)
Port F (“dock microphone”) input is routed to Port D (“internal speakers”) and Port B (system headphone port). The analog mixer is disabled to reduce power consumption.
2.24.4.
2.24.5.
When Port E presence detect = 0
•
Presence detect for Port E = 0 (nothing plugged in)
•
Port F, the “dock microphone”, input is routed to Port B, or D when that port is active
•
The power supply (charge pump) for B will be inactive if B is not in use.
•
If Port B is not in use (port presence detect = 0), Port D, internal speakers, will be active and port
B will be inactive.
•
EAPD must not be forced low due to the dock being absent or high when a dock is present.
EAPD is used to indicate if AUX Audio Mode is in use.
When Port E presence detect = 1
•
Presence detect for Port E = 1 (something plugged in)
•
Port D is disabled
•
If Port B is in use (port presence detect = 1), that port will be enabled and output the audio entering Port F
•
The power supply for port B will be active if port B is in use.
•
If Port B is not in use (port presence detect = 0), port B will be inactive and the audio on Aux_In
will be mixed with the audio from the Secondary Audio input and routed to Port E, the dock
headphone jack.
•
EAPD must not be forced low due to the dock being absent or high when a dock is present.
EAPD is used to indicate if AUX Audio Mode is in use.
EAPD
(pin)
Aux
Support
Enable1
0
1
Port E
detect
Port B
detect
Port A, C, F,
DMIC
detect
NA
NA
NA
NA
disabled
disabled
disabled (mute)
0
NA
NA
NA
Widget controlled
Widget controlled
Widget controlled
1
1
0
0
NA
enabled
(F to D)
disabled
disabled (mute)
1
1
0
1
NA
disabled
enabled
(F to B)
disabled (mute)
1
1
1
0
NA
disabled
disabled
enabled
Aux+Secondary
1
1
1
1
NA
disabled
enabled
(F to B)
disabled (mute)
Port D
behavior
Port B
behavior
Port E
behavior
1.default value for Aux Audio Enable is determined by bond option.
IDT™ CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
33
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2.24.6.
SYSTEM DIAGRAMS (Analog I/O)
Figure 11. Aux Audio Playback When Nothing Plugged In (or System is not Docked)
Playback Speaker
HD Audio Interface
D-MIC
DM
HP
MIC
A
I2S
CODEC
I2S
Routing
Dock
F
HP
B
S
SPKR
D
EQ
NA
C
MIC
S
Aux Audio
Module
PC
Beep
Filter
EC
Figure 12. Aux Audio Playback When System Headphones are Plugged In
Playback Headphone
HD Audio Interface
D-MIC
DM
MIC
A
HP
I2S
CODEC
I2S
Routing
F
HP
B
S
SPKR
D
EQ
NA
C
Aux Audio
Module
Filter
IDT™ CONFIDENTIAL
MIC
S
PC
Beep
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Dock
EC
34
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Figure 13. Aux Audio Playback when the System is Docked and Headphones are Plugged In
Playback Dock Headphone
HD Audio Interface
D-MIC
DM
MIC
A
HP
I2S
CODEC
F
HP
B
S
SPKR
D
EQ
NA
C
Dock
MIC
S
Aux Audio
Module
PC
Beep
Filter
2.24.7.
I2S
Routing
EC
EAPD
Since the Aux Audio mode overrides the default behavior but not the actual port settings when in
reset, the logical state of the EAPD pin must be overridden as well. When Aux Audio mode is
enabled and the part is in reset as described above, the logical state of EAPD will be 1 (External
Amplifier Powered Up) unless held low by an external circuit. This ensures that audio pass-thru and
analog PC_Beep will be supported.
2.24.8.
Analog PC_Beep
Analog PC_Beep is supported in Aux Audio mode. By default, analog PC_Beep is disabled but may
be enabled due to Beep pass-thru support in reset (see the PC_Beep section). If the CODEC is programmed to enable analog PC_Beep and Aux Audio mode is enabled, the next time reset is
asserted, the analog PC_Beep pin will be mixed at each of the active outputs.
2.24.9.
Class-D BTL Issues
While in Aux Audio mode the HD Audio bus clock (BitClk) is not available. The Class-D controller
requires a very high speed clock to operate and an internal clock must be provided. In Aux Audio
mode, the actual frequency used by the Class-D controller and its associated ADC will not be exact
since an external reference will not be available.The performance characteristics in Aux Audio Mode
will be degraded compared to the normal operating mode characteristics specified elsewhere in this
document.
2.24.10. Firmware/Software Requirements:
The reconfiguration outlined in this chapter is autonomous (without the help of firmware or OS
driver.)
This autonomous mode does not interfere with normal operation.
If it is desirable to stop the HD Audio bus while the CODEC is in D3 under OS control per DCN
HDA015-B, no action is required. The CODEC will not enter Aux Audio Mode unless placed in
D3cold.
IDT™ CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
35
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
2.25. Microphone Mute Input
Available on silicon revision WB and beyond.
The 92HD99 supports a microphone mute input. An external switch or other circuit may directly
mute the CODEC without relying on software control. This is a most helpful feature for allowing the
end user to conveniently enforce privacy since it bypasses the record gain/mute functions typically
controlled by software. While recording is muted, any active stream will receive digital silence.
IDT™ CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
36
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
3. CHARACTERISTICS
3.1.
Electrical Specifications
3.1.1.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the 92HD99. These ratings, which are standard values for IDT commercially rated parts, are stress ratings only. Functional
operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for
extended periods can affect product reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
Item
Pin
Analog maximum supply voltage
Digital maximum supply voltage
Maximum Rating
AVdd
6 Volts
DVdd
5.5 Volts
PVdd
6 Volts
VREFOUT output current
5 mA
Voltage on any pin relative to ground
Vss - 0.3 V to Vdd + 0.3 V
Operating temperature
0 oC to +70 oC
Storage temperature
-55 oC to +125 oC
Soldering temperature
Soldering temperature information for all available in the package
section of this datasheet.
Table 15. Electrical Specification: Maximum Ratings
3.1.2.
Recommended Operating Conditions
Parameter
Power Supplies
Power Supply Voltage
Min.
Typ.
Max.
Units
1.6
1.8
1.98
V
DVDD_IO (3.3V signaling)
3.135
3.3
3.465
V
DVDD_IO (1.5V signaling)
1.418
1.5
1.583
V
Digital - 3.3 V
3.135
3.3
3.465
V
Analog - 5 V
4.75
5
5.25
V
+70
C
+90
C
DVDD_Core
Ambient Operating Temperature
Case Temperature
0
Tcase (48-QFN)
Table 16. Recommended Operating Conditions
ESD: The 92HD99 is an ESD (electrostatic discharge) sensitive device. The human body and test equipment can
accumulate and discharge electrostatic charges up to 4000 Volts without detection. Even though the 92HD99 implements
internal ESD protection circuitry, proper ESD precautions should be followed to avoid damaging the functionality or
performance.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
37
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
3.2.
92HD99 Analog Performance Characteristics
(Tambient = 25 ºC, AVdd = 4.75V (4.5-5.25V) or 3.3V +/-5%, DVdd = 3.3V ± 5% or 1.8V± 10%, AVss=DVss=0V; 20Hz to
20KHz swept sinusoidal input; Sample Frequency = 48 kHz; 0dB FS = 1Vrms for AVdd = 4.75V and 0.71Vrms for AVdd
= 3.3V, 10KΩ//50pF load, Testbench Characterization BW: 20 Hz – 20 kHz, 0 dB settings on all gain stages)
Parameter
Min
Conditions
Typ
Max
Unit
Digital to Analog Converters
Resolution
24
Bits
-60dB FS signal level, Analog Mixer disabled
98
dB
Analog Mixer Disabled, PCM data
98
dB
THD+N3 - DAC to All Line-Out Ports
Analog Mixer Disabled,-3dB FS Signal, PCM
data
89
dBr
SNR2 - DAC to All Headphone Ports
Analog Mixer Disabled, 10K load, PCM data
98
dB
THD+N3 - DAC to All Headphone Ports
Analog Mixer Disabled,-3dB FS Signal, 10K
load, PCM data
87
dBr
SNR2 - DAC to All Headphone Ports
Analog Mixer Disabled, 32 load, PCM data
98
dB
THD+N3 - DAC to All Headphone Ports
Analog Mixer Disabled, -3dB FS Signal, 32
load, PCM data
73
dBr
Dynamic Range1: PCM to All Analog
Outputs
SNR2 - DAC to All Line-Out Ports
Any Analog Input (ADC) to DAC Crosstalk 10KHz Signal Frequency. 0dBV signal applied
to ADC, DACs idle, ports enabled as output.
-65
-
-
dB
Any Analog Input (ADC) to DAC Crosstalk
1KHz Signal Frequency. see above
-65
-
-
dB
DAC L/R crosstalk
DAC to LO or HP 20-15KHz into 10K load
70
73
dB
DAC L/R crosstalk
DAC to HP 20-15KHz into 32 load
65
68
dB
Gain Error
Interchannel Gain Mismatch
D/A Digital Filter Pass
Analog Mixer Disabled
0.5
dB
Analog Mixer Disabled
0.5
dB
21,000
Hz
0.125
+/- dB
Band4
20
-
D/A Digital Filter Pass Band Ripple5
D/A Digital Filter Transition Band
21,000
-
31,000
Hz
D/A Digital Filter Stop Band
31,000
-
-
Hz
D/A Digital Filter Stop Band Rejection6
-100
-
-
dB
D/A Out-of-Band Rejection7
-55
-
-
dB
Group Delay (48KHz sample rate)
-
-
1
ms
Attenuation, Gain Step Size DIGITAL
-
0.75
-
dB
DAC Offset Voltage
-
10
20
mV
Deviation from Linear Phase
-
1
10
deg.
Analog Outputs
Full Scale All Mono/Line-Outs
DAC PCM Data
1.00
-
-
Vrms
Full Scale All Mono/Line-Outs
DAC PCM Data
2.83
-
-
Vp-p
Table 17. 92HD99 Analog Performance Characteristics
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
38
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Parameter
Conditions
Min
Typ
Max
Unit
32load
40
60
-
mW
(peak)
Amplifier output impedance
Mono/Line Outputs
Headphone Outputs
150
0.1
External load Capacitance
Mono/Line Outputs
Headphone Outputs
All Headphone Capable Outputs
Ohms
220
pF
Analog inputs
Full Scale Input Voltage
0dB Boost @4.75V
(input voltage required for 0dB FS output)
1.05
-
-
Vrms
All Analog Inputs with boost
10dB Boost
0.320
-
-
Vrms
All Analog Inputs with boost
20dB Boost
0.105
-
-
Vrms
All Analog Inputs with boost
30dB Boost
0.032
-
-
Vrms
2
dB
Boost Gain Accuracy
-2
Input Impedance
-
50
-
K
Input Capacitance
-
15
-
pF
Analog Mixer
Dynamic Range: PCM to All Analog
Outputs
-60dB FS signal level Analog Beep enabled all
other mixer inputs mute
95
dB
SNR2 - All Line-Inputs to all Line Outputs
All inputs unmuted, single line input driven by
ATE.
90
dB
THD+N3 - All Line-Inputs to all Line
Outputs
0dB Full Scale Input on one input, all others
silent.
83
dBr
SNR2 - DAC to All Ports
Analog Mixer Enabled, PCM data, all others
inputs mute.
98
dB
THD+N3 - DAC to All Ports
Analog Mixer Enabled, 0dB FS Signal, PCM
data, all others inputs unmute/silent
85
dBr
Attenuation, Gain Step Size ANALOG
-
1.5
-
dB
Analog to Digital Converter
Resolution
24
Bits
94
dB
20dB Boost
High Pass Filter Enabled, -60dB FS
90
dB
THD+N3 All Analog Inputs to A/D
High Pass Filter enabled, -3dB FS signal level
83
dB
THD+N3 All Analog Inputs to A/D
20dB Boost, High Pass Filter enabled, -3dB
FS signal level
80
dB
Full Scale Input Voltage
0dB Boost (input voltage required to generate
0dBFS per AES 17)
Dynamic Range1, All Analog Inputs to A/D
High Pass Filer Enabled, -60dB FS, No boost
Full Scale Input Voltage
20dB Boost (input voltage required to
generate 0dBFS per AES 17)
Dynamic Range1, All Analog Inputs to A/D
1.05
0.105
Analog Frequency Response8
10
-
30,000
Hz
A/D Digital Filter Pass Band4
20
-
21,000
Hz
0.1
+/- dB
A/D Digital Filter Pass Band Ripple5
Table 17. 92HD99 Analog Performance Characteristics
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
39
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Parameter
Min
Typ
Max
Unit
A/D Digital Filter Transition Band
21,000
-
31,000
Hz
A/D Digital Filter Stop Band
31,000
-
-
Hz
-100
-
-
dB
48 KHz sample rate
-
-
1
ms
Any unselected analog Input to ADC
Crosstalk
10KHz Signal Frequency
-65
-
-
dB
Any unselected analog Input to ADC
Crosstalk
1KHz Signal Frequency
-65
-
-
dB
Any selected input to ADC 20-15Khz
-65
dB
DAC output 0dBFS. All outputs loaded. Input
to ADC open. 20-15Khz
-65
dB
Conditions
A/D Digital Filter Stop Band Rejection6
Group Delay
ADC L/R crosstalk
DAC to ADC crosstalk
Spurious Tone Rejection9
-
-100
-
dB
Attenuation, Gain Step Size
(analog)
-
1.5
-
dB
Interchannel Gain Mismatch ADC
-
-
0.5
dB
Power Supply
Power Supply Rejection Ratio
10kHz
-
-60
-
dB
Power Supply Rejection Ratio
1kHz
-
-70
-
dB
D0 Didd10
3.3V
25
mA
D0 Aidd10
5V
66
mA
D0 Didd11
3.3V
17
mA
D0 Aidd11
5V
54
mA
D1 Didd12
3.3V
10
mA
D1 Aidd12
5V
30
mA
D2 Didd
3.3V
8
mA
D2 Aidd
5V
7
mA
D3 (Beep enabled) Didd13
3.3V
2
mA
D3 (Beep enabled) Aidd13
5V
6
mA
D3 Didd13
3.3V
2
mA
D3 Aidd13
5V
4
mA
D3cold Didd13
3.3V
1.3
mA
D3cold Aidd13
5V
3.5
mA
Vendor D4 Didd
3.3V
1.1
mA
Vendor D4 Aidd
5V
3.5
mA
Vendor D5 Didd
3.3V
1
mA
Vendor D5 Aidd
5V
0.3
mA
Voltage Reference Outputs
VREFOut14
-
VREFOut Drive
0.5 X
AVdd
1.6
-
V
mA
Table 17. 92HD99 Analog Performance Characteristics
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
40
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Parameter
Min
Conditions
VREFILT (VAG)
Typ
Max
0.45 X
AVdd
Unit
V
Phased Locked Loop
PLL lock time
96
200
usec
PLL (or HD Audio Bit CLK) 24MHz clock
jitter
150
500
psec
ESD / Latchup
IEC1000-4-2
1
Level
JESD22-A114-B
2
Class
JESD22-C101
4
Class
Table 17. 92HD99 Analog Performance Characteristics
1.Dynamic Range is the ratio of the full scale signal to the noise output with a -60dBFS signal as defined in AES17 as SNR in
the presence of signal and outlined in AES6id, measured “A weighted” over 20 Hz to 20 kHz bandwidth
2.Ratio of Full Scale signal to idle channel noise output is measured “A weighted” over a 20 Hz to a 20 kHz bandwidth.
(AES17-1991 Idle Channel Noise or EIAJ CP-307 Signal-to-noise Ratio).
3.THD+N ratio as defined in AES17 and outlined in AES6id,non-weighted, over 20 Hz to 20 kHz bandwidth.Results at the jack
are dependent on external components and will likely be 1 - 2dB worse.
4.Peak-to-Peak Ripple over Passband meets ± 0.125dB limits, 48 kHz or 44.1 kHz Sample Frequency. 1dB limit.
5.Peak-to-Peak Ripple over Passband meets ± 0.125dB limits, 48 kHz or 44.1 kHz Sample Frequency. 1dB limit.
6.Stop Band rejection determines filter requirements. Out-of-Band rejection determines audible noise.
7.The integrated Out-of-Band noise generated by the DAC process, during normal PCM audio playback, over a bandwidth 28.8
to 100 kHz, with respect to a 1 Vrms DAC output.
8.± 1dB limits for Line Output & 0 dB gain, at -20dBV
9.Spurious tone rejection is tested with ADC dither enabled and compared to ADC performance without dither.
10.All functions/converters active, pin complexes enabled, two FDX streams, line (10Kohm) loads. Add 24mA analog current per
stereo 32 ohm headphone.
11.One stereo DAC and corresponding pin widgets enabled (playback mode)
12.Mixer enabled
13.Idle measurement D3 set for minimum clicks/pops (biases and min. amps. on)
14.Can be set to 0.5 or 0.8 AVdd.
3.3.
Class-D BTL Amplifier Performance
Parameter
Min
Output Power (BTL 4 ohm, 5V)
Typ
Max
2
W
Amplifier Efficiency (4, 5V, 2W)
88
THD+N (BTL 4, 5V, FS)
%
1
THD+N (BTL 4, 5V, -3dBFS)
0.3
Frequency Response
20
PWM frequency
Unit
-
%
%
20K
Hz
352.8
KHz
Output voltage noise (4, 5V)
65
uV
Idle current
3.6
mA
0
mA
Shutdown current
Table 18. Class-D BTL Amplifier Performance
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
41
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
3.4.
Capless Headphone Supply Characteristics
Parameter
Min
Typ
Max
Unit
LDO idle current
1
2
mA
Capless Headphone Amp idle current
2
3
mA
Charge Pump idle current
4
6
mA
Charge Pump shutdown time
1
mS
Charge Pump start-up time
10
mS
Frequency
384
KHz
C1/C2 cap value
2.2
uF
Table 19. Capless Headphone Supply
3.5.
AC Timing Specs
3.5.1.
HD Audio Bus Timing
Parameter
BCLK Frequency
BCLK Period
Definition
Symbol
Average BCLK frequency
Min
Typ
Max
Units
23.9976
24.0
24.0024
Mhz
41.67
42.171
ns
Period of BCLK including jitter
Tcyc
41.163
BCLK High Phase
High phase of BCLK
T_high
17.5
24.16
ns
BCLK Low Phase
Low phase of BCLK
T_low
17.5
24.16
ns
500
ps
11
ns
BCLK jitter
BCLK jitter
150
SDI delay
Time after rising edge of BCLK that
SDI becomes valid
T_tco
3
SDO setup
Setup for SDO at both rising and
falling edges of BCLK
T_su
5
ns
SDO hold
Hold for SDO at both rising and
falling edges of BCLK
T_h
5
ns
Table 20. HD Audio Bus Timing
Figure 14. HD Audio Bus Timing
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
42
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
3.5.2.
Digital Microphone Timing
Parameter
DMIC_CLK Frequency
DMIC_CLK Period
Definition
Symbol
Average DMIC_CLK frequency
Period of DMIC_CLK
Tdmic_cyc
Min
Typ
Max
Units
1.176
2.352
4.704
MHz
850.34
425.17
212.59
ns
5000
ps
DMIC_CLK jitter
DMIC_CLK jitter
DMIC Data setup
Setup for the microphone data at both rising
and falling edges of DMIC_CLK
Tdmic_su
5
ns
DMIC Data hold
Hold for the microphone data at both rising and
falling edges of DMIC_CLK
Tdmic_h
5
ns
Table 21. Digital Mic timing
3.5.3.
GPIO Characteristics
Parameter
Definition
Symbol
Min
Typ
Max
Units
Input High Voltage1
input level at or above which a 1 is reliably
recorded
Vih
0.6 x
VDD
Input Low Voltage1
input level at or below which a 0 is reliably
recorded. VDD may be DVDD or AVDD
Vil
Output High Voltage
iout = 4mA
VDD may be DVDD or AVDD depending on pin
Voh
Output Low Voltage
iout = -4mA
VDD may be DVDD or AVDD depending on pin
Vol
Input rise/fall time
transition time between 10% and 90% of supply T_rise/T_fall
Input/Tristate High
Leakage Current
Vin = VDD
VDD may be DVDD or AVDD depending on pin
(does not include pull-up or pull-down resistor if
present)
0.5
uA
Vin = 0
Input/Tristate Low Leakage VDD may be DVDD or AVDD depending on pin
(does not include pull-up or pull-down resistor if
Current
present)
-50
uA
V
0.35 x
VDD
0.9 x
VDD
V
V
0.1 x
VDD
V
10
ns
Table 22. GPIO Characteristics
1.High peak currents during dynamic switching of the Class-D PWM Outputs can result in Ground Rail Bounce. The amount of
Ground Bounce should be kept below 0.35 x VDD for all Inputs, including internal logic which is tied to DVDD_CORE.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
43
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
4. FUNCTIONAL BLOCK DIAGRAM
DAC 0
MixerOutVol
DAC0
DAC1
DAC0
MUX
Digital
Mute
vol
Digital PC Beep
Analog Beep
MUX
DAC0_Dig
Vendor
Specific
MUX
Stream &
Channel
Select

HP
Port A
Mic Bias
PORT A
Boost
+0/+10/+20/+30 dB
Pin Complex
Pins 22/23
DAC 1
Digital PC Beep
DAC1
MixerOutVol
DAC0
DAC1
Mixer
-16 to +30 dB
In 1 dB steps
mute
vol
Gain
MixerOutVol
DAC0
DAC1
Port C
Port F
Analog Beep

LO
Port C
+0/+10/+20/+30 dB
Clocking
Gain
vol
5-band
EQ
Highpass
Filter
Digital
PWM
controller

Class-D
PORT D
BTL
Pin Complex
Pins 34/35/37/38
LO
Port F
Port F
Pin Complex
Pins 15/16
Analog Beep
MUX
MixerOutVol
DAC0
DAC1
Port C
MUX
mute

Digital PC Beep
Mixer
Port A
MUX
ADC1
MUX
HD Audio LINK LOGIC
MixerOutVol_Dig
DAC0_Dig
DAC1_Dig
Analog Beep_Dig
MUX
Digital PC Beep
-16 to +30 dB
In 1 dB steps
Mic Bias
PORT C
Boost
DMIC0
Stream &
Channel
Select
PORT B
HP
Pin Complex
Pins 25/26
MUX
ADC0
Cap-less

Port A
MUX
Stream &
Channel
Select
Digital PC Beep
Analog Beep
MUX
Digital
Mute
vol
MUX
Stream &
Channel
Select
MUX
MUX
DAC1_Dig
PORT F
Boost
+0/+10/+20/+30 dB
Pin Complex
Pins 13/14
DMIC0
Beep_Active
0,-6,-12,-18dB

Mixer
MixerOutVol
mute
Vol
-46.5 to 0 dB
In 1.5 dB steps
MixerOutVol_Dig
mute
vol
DAC0
mute
vol
DAC1
Analog Beep_Dig
mute
Analog Beep
mute
vol
Detect/Convert
Analog PC_BEEP
vol
0,-6,-12,-18dB
mute
vol
Port A
mute
vol
Port C
mute
vol
Port F
Digital Microphone volume and mute is
done after the ADC but shown here and in
widget list as same as analog path.
+0/+10/+20/+30 dB
-34.5 to +12 dB
In 1.5 dB steps
DMIC_0
Boost
DMIC
DMIC_0
Pin 3
ADC
Figure 15. Functional Block Diagram
IDT™ CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
44
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
5. WIDGET DIAGRAM
IN VOL
10/20/30
NID = 19h
VOLUME
Mute
HP
Port B
NID = 0Ch
DAC0
DAC1
MixerOutVol
VSW
LO
Port C
IN VOL
10/20/30
Mixer
Port A
ADC0
MUX
BIAS
Port C
Port C
NID = 10h
Port F
-16 to 30dB
1dB step
BIAS
NID = 0Bh
DAC0
DAC1
MixerOutVol
VSW
DAC1
NID = 17h
ADC0
LO
Port A
Port A
NID = 1Ah
NID = 15h
NID = 0Ah
DAC0
DAC1
MixerOutVol
VSW
-95.25 to 0dB
0.75dB step
VOLUME
NID = 14h
NID = 22h
DAC0
MUTE
VOLUME
DAC0
DAC1
-95.25 to 0dB
0.75dB step
MUTE
NID = 13h
DMIC0
NID = 0Dh
DAC0
DAC1
MixerOutVol
VSW
BTL
Port D
EQ
ADC0 MUX
NID = 16h
ADC1
VOLUME
Mute
NID = 18h
NID = 0Eh
Mixer
LO
Port F
VSW
Port A
ADC1
MUX
NID = 0Fh
DAC0
DAC1
MixerOutVol
IN VOL
10/20/30
Port F
Port C
NID = 11h
Port F
-16 to 30dB
1dB step
DMIC0
DMIC0
Analog*
ADC1 MUX
MixerOutVol
MixerOutVol
Mute Volume
DMIC0
10/20/30
NID = 1Bh
NID = 1Ch
VOL
HDA
Link
Mixer
Mute Volume

-46.5 to 0dB
in 1.5dB steps
Mute Volume
DAC1
Mute Volume
Port A
Mute Volume
Port C
Mute Volume
Port F
-34.5 to +12dB
in 1.5dB steps
Mixer
NID = 21h
DAC0
To all ports enabled
as an output
NID = 1Dh
NID = 1Eh
NID = 1Fh
NID = 20h
NID = 12h
VSW
VSW
VSW
VSW
VSW
To all ports enabled
as an output
VSV
Digital
PC_BEEP
Mute Volume
PC_BEEP (Pin 12)
0,-6,-12,-18dB
Figure 16. Widget Diagram
IDT™ CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
45
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
6. PORT AND PIN CONFIGURATIONS
6.1.
Port Configurations
Mobile
Dock
Side
B
HP
E
HP
A
MIC/HP
F
MIC
Digital Mic
Array
SPDIF_OUT
STEREO
AMP
Internal
HDMI/Display Port
Desktop 1
Desktop 2
Rear
Rear
Front
A
F
D
HP
MIC (fixed bias)
B
HP
F
LO
B
HP
C
MIC,LI
C
MIC / LI
A
MIC,HP
Internal
D
STEREO
AMP
Internal
STEREO
AMP
Front
Chassis
Speaker
D
Chassis
Speaker
Figure 17. Port Configurations
IDT™ CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
46
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
6.2.
Pin Configuration Default Register Settings
The following table shows the Pin Widget Configuration Default settings. Desktop implementation with 2 jacks in front
and 3 jacks in rear. The internal speaker is redirected from the front (green) headphone jack. An internal microphone is
present.
Pin Name
Port
Location
Device
Connection
Color
Misc
PortAPin
Connect to
Jack
00b
Mainboard
Front
2h
Mic In
Ah
1/8 inch Jack
1h
Pink
9h
Jack Detect
Override=0
2h
0h
PortBPin
Connect to
Jack
00b
Mainboard
Front
2h
HP Out
2h
1/8 inch Jack
1h
Green
4h
Jack Detect
Override=0
1h
Fh
PortCPin
Connect to
Jack
00b
Mainboard
Rear 1h
Mic In
Ah
1/8 inch Jack
1h
Pink
9h
Jack Detect
Override=0
2h
1h
PortDPin
Internal
10b
NA
010000b
Speaker
1h
Other Analog Unknown Jack Detect
7h
0h
Override=1
1h
0h
Connect to
Jack
00b
Mainboard
Rear
1h
Line In
8h
Jack Detect
Override=0
2h
Eh
Unknown Jack Detect
0h
Override=1
3h
0h
PortEPin
PortFPin
NA
1/8 inch Jack
1h
MonoOutPin
NA
DigOutPin0
NA
DigOutPin1
DigMic0Pin
Assoc. Seq
Blue
3h
NA
Internal
10b
Internal
010000b
Mic In
Ah
ATAPI
3h
Table 23. Pin Configuration Default Settings
IDT™ CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
47
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7. WIDGET INFORMATION
Bits [39:32]
Bits [31:28]
BITS [27:20]
BITS[19:16]
BITS [15:0]
Reserved
CODEC Address
NID
Verb ID (4-bit)
Payload Data (16-bit)
Table 24. Command Format for Verb with 4-bit Identifier
Bits [39:32]
Bits [31:28]
BITS [27:20]
BITS[19:8]
BITS [7:0]
Reserved
CODEC Address
NID
Verb ID (12-bit)
Payload Data (8-bit)
Table 25. Command Format for Verb with 12-bit Identifier
There are two types of responses: Solicited and Unsolicited. Solicited responses are provided as a
direct response to an issued command and will be provided in the frame immediately following the
command. Unsolicited responses are provided by the CODEC independent of any command. Unsolicited responses are the result of CODEC events such as a jack insertion detection. The formats for
Solicited Responses and Unsolicited Responses are shown in the tables below. The “Tag” field in
bits [31:28] of the Unsolicited Response identify the event.
Bit [35]
Bit [34]
BITS [33:32]
BITS[31:0]
Valid (Valid = 1)
UnSol = 0
Reserved
Response
Table 26. Solicited Response Format
Bit [35]
Bit [34]
BITS [33:32]
BITS[31:28]
BITS [27:0]
Valid (Valid = 1)
UnSol = 1
Reserved
Tag
Response
Table 27. Unsolicited Response Format
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
48
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.1.
Widget List
ID
Widget Name
Description
00h
Root
Root Node
01h
AFG
Audio Function Group
0Ah
Port A
Port A Pin Widget (Headphone, Line IN/OUT, MIC)
0Bh
Port B
Port B Pin Widget (Cap-less Headphone)
0Ch
Port C
Port C Pin Widget (Line IN/OUT, MIC)
0Dh
Port D
Port D Pin Widget (Class-D BTL MONO output)
0Eh
VSW
Vendor Defined Widget
0Fh
Port F
Port F Pin Widget (Line IN/OUT, MIC)
10h
VSW
Vendor Defined Widget
11h
DigMic0
Digital Microphone 0 Pin Widget
12h
VSW
Vendor Defined Widget
13h
DAC0
Stereo Output Converter to DAC
14h
DAC1
Stereo Output Converter to DAC
15h
ADC0
Stereo Input Converter to ADC
16h
ADC1
Stereo Input Converter to ADC
17h
ADC0Mux
ADC0 Mux with volume and mute
18h
ADC1Mux
ADC1 Mux with volume and mute
19h
VSW
Vendor Defined Widget
1Ah
VSW
Vendor Defined Widget
1Bh
Mixer
Input Mixer (Input Ports, DACs, Analog PC_Beep)
1Ch
MixerOutVol
Volume control for analog mixer
1Dh
VSW
Vendor Defined Widget
1Eh
VSW
Vendor Defined Widget
1Fh
VSW
Vendor Defined Widget
20h
VSW
Vendor Defined Widget
21h
PCBeep
Digital PC Beep
22h
VSW
Vendor Defined Widget
Table 28. Widget List
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
49
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.2.
Reset Key
Abbreviation
Description
POR
Power On Reset.
SAFG
Single AFG Reset - One single write to the Reset Verb in the AFG Node.
DAFG
Double AFG Reset - Two consecutive Single AFG Resets with only idle frames (if
any) and no Link Resets between.
S&DAFG
Single And Double AFG Reset - Either one will cause reset.
LR
Link Reset - Level sensitive reset anytime the HDA Reset is set low.
ELR
Exiting Link Reset - Edge sensitive reset any time the HDA Reset transitions from
low to high.
ULR
Unexpected Link Reset - Level sensitive reset anytime the HDA Reset is set low
when the ClkStopOK indicator is currently set to 0.
PS
Power State Change - Reset anytime the Actual Power State changes for the Widget
in question.
7.3.
Root (NID = 00h): VendorID
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0000h
Field Name
Bits
R/W
Default
Reset
Vendor
31:16
R
111Dh
N/A
R
see below
N/A
R
see below
N/A
Vendor ID.
DeviceFix
15:8
Device ID.
DeviceProg
7:0
Device ID.
Device
92HD99
Device ID
76E5h
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
50
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.3.1.
Reg
Root (NID = 00h): RevID
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0002h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:24
R
00h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
Major
23:20
Major rev number of compliant HD Audio spec.
Minor
19:16
R
0h
N/A (Hard-coded)
Minor rev number of compliant HD Audio spec.
RevisionFix
15:12
R
xh
N/A (Hard-coded)
Vendor's rev number for this device.
RevisionProg
11:8
R
xh
N/A (Hard-coded)
Vendor's rev number for this device.
SteppingFix
7:4
R
xh
N/A (Hard-coded)
Vendor stepping number within the Vendor RevID.
SteppingProg
3:0
R
xh
N/A (Hard-coded)
Vendor stepping number within the Vendor RevID.
7.3.2.
Reg
Root (NID = 00h): NodeInfo
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0004h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
51
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
StartNID
23:16
R
01h
N/A (Hard-coded)
Starting node number (NID) of first function group
Rsvd1
15:8
R
00h
N/A (Hard-coded)
R
01h
N/A (Hard-coded)
Reserved.
TotalNodes
7:0
Total number of nodes
7.4.
AFG (NID = 01h): NodeInfo
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0004h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
0Ah
N/A (Hard-coded)
Reserved.
StartNID
23:16
Starting node number for function group subordinate nodes.
Rsvd1
15:8
R
00h
N/A (Hard-coded)
R
19h
N/A (Hard-coded)
Reserved.
TotalNodes
7:0
Total number of nodes.
7.4.1.
Reg
AFG (NID = 01h): FGType
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F0005h
52
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:9
R
000000h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
UnSol
8
Unsolicited response supported: 1 = yes, 0 = no.
NodeType
7:0
R
1h
N/A (Hard-coded)
Function group type:
00h = Reserved
01h = Audio Function Group
02h = Vendor Defined Modem Function Group
03h-7Fh = Reserved
80h-FFh = Vendor Defined Function Group
7.4.2.
Reg
AFG (NID = 01h): AFGCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0008h
Field Name
Bits
R/W
Default
Reset
Rsvd3
31:17
R
00h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
BeepGen
16
Beep generator present: 1 = yes, 0 = no.
Rsvd2
15:12
R
0h
N/A (Hard-coded)
R
Dh
N/A (Hard-coded)
Reserved.
InputDelay
11:8
Typical latency in frames. Number of samples between when the sample is received as an analog signal at the pin and when the digital representation is
transmitted on the HD Audio link.
Rsvd1
7:4
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
53
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
OutputDelay
3:0
R
Dh
N/A (Hard-coded)
Typical latency in frames. Number of samples between when the signal is received from the HD Audio link and when it appears as an analog signal at the
pin.
7.4.3.
Reg
AFG (NID = 01h): PCMCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Ah
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:21
R
000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
B32
20
32 bit audio format support: 1 = yes, 0 = no.
B24
19
R
1h
N/A (Hard-coded)
24 bit audio format support: 1 = yes, 0 = no.
B20
18
R
1h
N/A (Hard-coded)
20 bit audio format support: 1 = yes, 0 = no.
B16
17
R
1h
N/A (Hard-coded)
16 bit audio format support: 1 = yes, 0 = no.
B8
16
R
0h
N/A (Hard-coded)
8 bit audio format support: 1 = yes, 0 = no.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
R12
11
384kHz rate support: 1 = yes, 0 = no.
R11
10
R
1h
N/A (Hard-coded)
192kHz rate support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
54
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
R10
9
R
0h
N/A (Hard-coded)
176.4kHz rate support: 1 = yes, 0 = no.
R9
8
R
1h
N/A (Hard-coded)
96kHz rate support: 1 = yes, 0 = no.
R8
7
R
1h
N/A (Hard-coded)
88.2kHz rate support: 1 = yes, 0 = no.
R7
6
R
1h
N/A (Hard-coded)
48kHz rate support: 1 = yes, 0 = no.
R6
5
R
1h
N/A (Hard-coded)
44.1kHz rate support: 1 = yes, 0 = no.
R5
4
R
0h
N/A (Hard-coded)
32kHz rate support: 1 = yes, 0 = no.
R4
3
R
0h
N/A (Hard-coded)
22.05kHz rate support: 1 = yes, 0 = no.
R3
2
R
0h
N/A (Hard-coded)
16kHz rate support: 1 = yes, 0 = no.
R2
1
R
0h
N/A (Hard-coded)
11.025kHz rate support: 1 = yes, 0 = no.
R1
0
R
0h
N/A (Hard-coded)
8kHz rate support: 1 = yes, 0 = no.
7.4.4.
Reg
AFG (NID = 01h): StreamCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F000Bh
55
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:3
R
00000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
AC3
2
AC-3 formatted data support: 1 = yes, 0 = no.
Float32
1
R
0h
N/A (Hard-coded)
Float32 formatted data support: 1 = yes, 0 = no.
PCM
0
R
1h
N/A (Hard-coded)
PCM-formatted data support: 1 = yes, 0 = no.
7.4.5.
Reg
AFG (NID = 01h): InAmpCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Dh
Field Name
Bits
R/W
Default
Reset
Mute
31
R
0h
N/A (Hard-coded)
Mute support: 1 = yes, 0 = no.
Rsvd3
30:23
R
00h
N/A (Hard-coded)
R
27h
N/A (Hard-coded)
Reserved.
StepSize
22:16
Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps.
Rsvd2
15
R
0h
N/A (Hard-coded)
R
03h
N/A (Hard-coded)
Reserved.
NumSteps
14:8
Number of gains steps (number of possible settings - 1).
Rsvd1
7
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
56
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Offset
6:0
R
00h
N/A (Hard-coded)
Indicates which step is 0dB
7.4.6.
Reg
AFG (NID = 01h): PwrStateCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Fh
Field Name
Bits
R/W
Default
Reset
EPSS
31
R
1h
N/A (Hard-coded)
Extended power states support: 1 = yes, 0 = no.
ClkStop
30
R
1h
N/A (Hard-coded)
D3 clock stop support: 1 = yes, 0 = no.
S3D3ColdSup
29
R
1h
N/A (Hard-coded)
Codec state intended during system S3 state: 1 = D3Hot, 0 = D3Cold.
Rsvd
28:5
R
000000h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
D3ColdSup
4
D3Cold power state support: 1 = yes, 0 = no.
D3Sup
3
R
1h
N/A (Hard-coded)
D3 power state support: 1 = yes, 0 = no.
D2Sup
2
R
1h
N/A (Hard-coded)
D2 power state support: 1 = yes, 0 = no.
D1Sup
1
R
1h
N/A (Hard-coded)
D1 power state support: 1 = yes, 0 = no.
D0Sup
0
R
1h
N/A (Hard-coded)
D0 power state support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
57
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.4.7.
Reg
AFG (NID = 01h): GPIOCnt
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0011h
Field Name
Bits
R/W
Default
Reset
GPIWake
31
R
1h
N/A (Hard-coded)
Wake capability. Assuming the Wake Enable Mask controls are enabled,
GPIO's configured as inputs can cause a wake (generate a Status Change
event on the link) when there is a change in level on the pin.
GPIUnsol
30
R
1h
N/A (Hard-coded)
GPIO unsolicited response support: 1 = yes, 0 = no.
Rsvd
29:24
R
00h
N/A (Hard-coded)
R
00h
N/A (Hard-coded)
Reserved.
NumGPIs
23:16
Number of GPI pins supported by function group.
NumGPOs
15:8
R
00h
N/A (Hard-coded)
Number of GPO pins supported by function group.
NumGPIOs
7:0
R
05h
N/A (Hard-coded)
Number of GPIO pins supported by function group.
7.4.8.
Reg
AFG (NID = 01h): OutAmpCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0012h
Field Name
Bits
R/W
Default
Reset
Mute
31
R
1h
N/A (Hard-coded)
Mute support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
58
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd3
30:23
R
00h
N/A (Hard-coded)
R
02h
N/A (Hard-coded)
Reserved.
StepSize
22:16
Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps.
Rsvd2
15
R
0h
N/A (Hard-coded)
R
7Fh
N/A (Hard-coded)
Reserved.
NumSteps
14:8
Number of gains steps (number of possible settings - 1).
Rsvd1
7
R
0h
N/A (Hard-coded)
R
7Fh
N/A (Hard-coded)
Reserved.
Offset
6:0
Indicates which step is 0dB
7.4.9.
Reg
AFG (NID = 01h): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd3
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Function Group have been reset.
Cleared by PwrState 'Get' to this Widget.
ClkStopOK
9
R
1h
POR - DAFG - ULR
Bit clock can currently be removed: 1 = yes, 0 = no.
Error
8
R
0h
POR - DAFG - ULR
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
59
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
7
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
6:4
Actual power state of this widget.
Rsvd1
3
R
0h
N/A (Hard-coded)
RW
3h
POR - DAFG - LR
Reserved.
Set
2:0
Current power state setting for this widget.
7.4.10.
Reg
AFG (NID = 01h): UnsolResp
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
708h
Get
F0800h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
En
7
Unsolicited response enable: 1 = enabled, 0 = disabled.
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
00h
POR - DAFG - ULR
Reserved.
Tag
5:0
Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node.
7.4.11.
Reg
AFG (NID = 01h): GPIO
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
715h
F1500h
60
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:5
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Data4
4
Data for GPIO4. If this GPIO bit is configured as Sticky (edge-sensitive) input,
it can be cleared by writing "0". For details of read back value, refer to HD Audio
spec. section 7.3.3.22
Data3
3
RW
0h
POR - DAFG - ULR
Data for GPIO3. If this GPIO bit is configured as Sticky (edge-sensitive) input,
it can be cleared by writing "0". For details of read back value, refer to HD Audio
spec. section 7.3.3.22
Data2
2
RW
0h
POR - DAFG - ULR
Data for GPIO2. If this GPIO bit is configured as Sticky (edge-sensitive) input,
it can be cleared by writing "0". For details of read back value, refer to HD Audio
spec. section 7.3.3.22
Data1
1
RW
0h
POR - DAFG - ULR
Data for GPIO1. If this GPIO bit is configured as Sticky (edge-sensitive) input,
it can be cleared by writing "0". For details of read back value, refer to HD Audio
spec. section 7.3.3.22
Data0
0
RW
0h
POR - DAFG - ULR
Data for GPIO0. If this GPIO bit is configured as Sticky (edge-sensitive) input,
it can be cleared by writing "0". For details of read back value, refer to HD Audio
spec. section 7.3.3.22
7.4.12.
Reg
AFG (NID = 01h): GPIOEn
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
716h
Get
F1600h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:5
R
00000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
61
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Mask4
4
RW
0h
POR - DAFG - ULR
Enable for GPIO4: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior
determined by GPIO Direction control
Mask3
3
RW
0h
POR - DAFG - ULR
Enable for GPIO3: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior
determined by GPIO Direction control
Mask2
2
RW
0h
POR - DAFG - ULR
Enable for GPIO2: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior
determined by GPIO Direction control
Mask1
1
RW
0h
POR - DAFG - ULR
Enable for GPIO1: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior
determined by GPIO Direction control
Mask0
0
RW
0h
POR - DAFG - ULR
Enable for GPIO0: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior
determined by GPIO Direction control
7.4.13.
Reg
AFG (NID = 01h): GPIODir
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
717h
Get
F1700h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:5
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Control4
4
Direction control for GPIO4: 0 = GPIO is configured as input; 1 = GPIO is configured as output
Control3
3
RW
0h
POR - DAFG - ULR
Direction control for GPIO3: 0 = GPIO is configured as input; 1 = GPIO is configured as output
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
62
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Control2
2
RW
0h
POR - DAFG - ULR
Direction control for GPIO2: 0 = GPIO is configured as input; 1 = GPIO is configured as output
Control1
1
RW
0h
POR - DAFG - ULR
Direction control for GPIO1: 0 = GPIO is configured as input; 1 = GPIO is configured as output
Control0
0
RW
0h
POR - DAFG - ULR
Direction control for GPIO0: 0 = GPIO is configured as input; 1 = GPIO is configured as output
7.4.14.
Reg
AFG (NID = 01h): GPIOWakeEn
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
718h
Get
F1800h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:5
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
W4
4
Wake enable for GPIO4: 0 = wake-up event is disabled; 1 = When HD Audio
link is powered down (RST# is asserted), a wake-up event will trigger a Status
Change Request event on the link.
W3
3
RW
0h
POR - DAFG - ULR
Wake enable for GPIO3: 0 = wake-up event is disabled; 1 = When HD Audio
link is powered down (RST# is asserted), a wake-up event will trigger a Status
Change Request event on the link.
W2
2
RW
0h
POR - DAFG - ULR
Wake enable for GPIO2: 0 = wake-up event is disabled; 1 = When HD Audio
link is powered down (RST# is asserted), a wake-up event will trigger a Status
Change Request event on the link.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
63
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
W1
1
RW
0h
POR - DAFG - ULR
Wake enable for GPIO1: 0 = wake-up event is disabled; 1 = When HD Audio
link is powered down (RST# is asserted), a wake-up event will trigger a Status
Change Request event on the link.
W0
0
RW
0h
POR - DAFG - ULR
Wake enable for GPIO0: 0 = wake-up event is disabled; 1 = When HD Audio
link is powered down (RST# is asserted), a wake-up event will trigger a Status
Change Request event on the link.
7.4.15.
Reg
AFG (NID = 01h): GPIOUnsol
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
719h
Get
F1900h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:5
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
EnMask4
4
Unsolicited enable mask for GPIO4. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when
GPIO2 is configured as input and changes state.
EnMask3
3
RW
0h
POR - DAFG - ULR
Unsolicited enable mask for GPIO3. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when
GPIO2 is configured as input and changes state.
EnMask2
2
RW
0h
POR - DAFG - ULR
Unsolicited enable mask for GPIO2. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when
GPIO2 is configured as input and changes state.
EnMask1
1
RW
0h
POR - DAFG - ULR
Unsolicited enable mask for GPIO1. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when
GPIO1 is configured as input and changes state.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
64
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
EnMask0
0
RW
0h
POR - DAFG - ULR
Unsolicited enable mask for GPIO0. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when
GPIO0 is configured as input and changes state.
7.4.16.
Reg
AFG (NID = 01h): GPIOSticky
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
71Ah
Get
F1A00h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:5
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Mask4
4
GPIO4 input type (when configured as input): 0 = Non-Sticky (level-sensitive);
1 = Sticky (edge-sensitive).
Mask3
3
RW
0h
POR - DAFG - ULR
GPIO3 input type (when configured as input): 0 = Non-Sticky (level-sensitive);
1 = Sticky (edge-sensitive).
Mask2
2
RW
0h
POR - DAFG - ULR
GPIO2 input type (when configured as input): 0 = Non-Sticky (level-sensitive);
1 = Sticky (edge-sensitive).
Mask1
1
RW
0h
POR - DAFG - ULR
GPIO1 input type (when configured as input): 0 = Non-Sticky (level-sensitive);
1 = Sticky (edge-sensitive).
Mask0
0
RW
0h
POR - DAFG - ULR
GPIO0 input type (when configured as input): 0 = Non-Sticky (level-sensitive);
1 = Sticky (edge-sensitive).
7.4.17.
AFG (NID = 01h): SubID
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
723h
722h
721h
720h
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
65
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.4.17.
Reg
AFG (NID = 01h): SubID
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Get
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
F2300h / F2200h / F2100h / F2000h
Field Name
Bits
R/W
Default
Reset
Subsys3
31:24
RW
00h
POR
00h
POR
01h
POR
00h
POR
Subsystem ID (byte 3)
Subsys2
23:16
RW
Subsystem ID (byte 2)
Subsys1
15:8
RW
Subsystem ID (byte 1)
Assembly
7:0
RW
Assembly ID (Not applicable to codec vendors).
7.4.18.
Reg
AFG (NID = 01h): GPIOPlrty
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
770h
Get
F7000h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:5
R
00000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
GP4
4
GPIO4 Polarity:
If configured as output or non-sticky input:
0 = inverting
1 = non-inverting
If configured as sticky input:
0 = falling edges will be detected
1 = rising edges will be detected
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
66
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
GP3
3
RW
1h
POR - DAFG - ULR
GPIO3 Polarity:
If configured as output or non-sticky input:
0 = inverting
1 = non-inverting
If configured as sticky input:
0 = falling edges will be detected
1 = rising edges will be detected
GP2
2
RW
1h
POR - DAFG - ULR
GPIO2 Polarity:
If configured as output or non-sticky input:
0 = inverting
1 = non-inverting
If configured as sticky input:
0 = falling edges will be detected
1 = rising edges will be detected
GP1
1
RW
1h
POR - DAFG - ULR
GPIO1 Polarity:
If configured as output or non-sticky input:
0 = inverting
1 = non-inverting
If configured as sticky input:
0 = falling edges will be detected
1 = rising edges will be detected
GP0
0
RW
1h
POR - DAFG - ULR
GPIO0 Polarity:
If configured as output or non-sticky input:
0 = inverting
1 = non-inverting
If configured as sticky input:
0 = falling edges will be detected
1 = rising edges will be detected
7.4.19.
Reg
AFG (NID = 01h): GPIODrive
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
771h
F7100h
67
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:5
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
OD4
4
GPIO4 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open drain (drive 0, float
for 1).
OD3
3
RW
0h
POR - DAFG - ULR
GPIO3 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open drain (drive 0, float
for 1).
OD2
2
RW
0h
POR - DAFG - ULR
GPIO2 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open drain (drive 0, float
for 1).
OD1
1
RW
0h
POR - DAFG - ULR
GPIO1 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open drain (drive 0, float
for 1).
OD0
0
RW
0h
POR - DAFG - ULR
GPIO0 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open-drain (drive 0, float
for 1).
7.4.20.
Reg
AFG (NID = 01h): DMic
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
778h
Get
F7800h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:6
R
0000000h
N/A (Hard-coded)
RW
0h
POR
Reserved.
Mono1
5
DMic1 mono select: 0 = stereo operation, 1 = mono operation (left channel duplicated to the right channel).
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
68
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Mono0
4
RW
0h
POR
DMic0 mono select: 0 = stereo operation, 1 = mono operation (left channel duplicated to the right channel).
PhAdj
3:2
RW
0h
POR
Selects what phase of the DMic clock the data should be latched:
0h = left data rising edge/right data falling edge
1h = left data center of high/right data center of low
2h = left data falling edge/right data rising edge
3h = left data center of low/right data center of high
Rate
1:0
RW
2h
POR
Selects the DMic clock rate:
0h = 4.704MHz
1h = 3.528MHz
2h = 2.352MHz
3h = 1.176MHz.
7.4.21.
Reg
AFG (NID = 01h): DACMode
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
780h
Get
F8000h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR
Reserved.
SwapEn
8
Internal DAC left channel and right channel swap. 0h = not swap, 1h =
swap.
SDMSettleDisable
7
RW
0h
POR
SDM wait-to-settle disable:
1 = at mute, the SDM switches to the mute pattern immediately
0 = at mute, the SDM switches to the mute pattern after settling (can take up to
~45ms)
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
69
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
SDMCoeffSel
6
RW
0h
POR
DAC SDM coefficient select (stages 1, 2, 3):
1 = 1/16, 1/2, 1/4
0 = 1/16, 1/4, 1/2
SDMLFHalf
5
RW
0h
POR
DAC SDM local feedback coefficient select: 1 = 1/4096, 0 = 1/2048.
SDMLFDisable
4
RW
0h
POR
DAC SDM local feedback disable: 1 = local feedback disabled, 0 = local feedback enabled.
InvertValid
3
RW
0h
POR
DAC Valid Invert: 1 = 7.056MHz valid strobe is inverted, 0 = 7.056MHz valid
strobe is not inverted.
InvertData
2
RW
0h
POR
DAC Data Invert: 1 = 1-bit outputs are inverted, 0 = 1-bit outputs are not inverted.
Atten6dBDisable
1
RW
1h
POR
Disable built-in -6dB digital attenuation: 1 = -6dB disabled, 0 = -6dB enabled.
Fade
0
RW
1h
POR
DAC Gain Fade Enable:
1 = gain will be slowly faded from old value to new value (~10ms)
0 = gain will jump immediately to new value.
7.4.22.
Reg
AFG (NID = 01h): ADCMode
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
784h
Get
F8400h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:4
R
0000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
70
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
InvertValid
3
RW
0h
POR
ADC Valid Invert: 1 = 14.112MHz valid strobe is inverted, 0 = 14.112MHz valid
strobe is not inverted.
InvertData
2
RW
0h
POR
ADC Data Invert: 1 = 1-bit inputs are inverted, 0 = 1-bit inputs are not inverted.
ADCClkDelay
1
RW
0h
POR
0h
POR
Delay ADC clock.
DACClkDelay
0
RW
Delay DAC clock.
7.4.23.
Reg
AFG (NID = 01h): PortUse
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
7C0h
Get
FC000h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:7
R
0000000h
N/A (Hard-coded)
RW
1h
POR
Reserved.
Mono
6
1=power down port if not input or output enabled, 0=do not force power down
based on input or output enable
PortF
5
RW
1h
POR
1=power down port if not input or output enabled, 0=do not force power down
based on input or output enable
PortE
4
RW
1h
POR
1=power down port if not input or output enabled, 0=do not force power down
based on input or output enable
PortD
3
RW
1h
POR
1=power down port if not input or output enabled, 0=do not force power down
based on input or output enable.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
71
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
PortC
2
RW
1h
POR
1=power down port if not input or output enabled, 0=do not force power down
based on input or output enable
PortB
1
RW
1h
POR
1=power down port if not input or output enabled, 0=do not force power down
based on input or output enable
PortA
0
RW
1h
POR
1=power down port if not input or output enabled, 0=do not force power down
based on input or output enable.
7.4.24.
Reg
AFG (NID = 01h): ComJack
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
7C7h
7C6h
Set
Get
FC700h/FC600h
Field Name
Bits
R/W
Default
Reset
Rsvd3
31:14
R
00000000h
N/A (Hard-coded)
RW
1h
POR
Reserved.
DebounceTime
13:12
Combo Jack debounce time set.
2'h0 = 0.1ms; 2'h1 = 125ms; 2'h2 = 500ms; 2'h3 = 1s."
Rsvd2
11
R
oh
N/A (Hard-coded)
RW
4h
POR
Reserved.
RbCon
10:8
Combo jack detection reference voltage
000 = 0.18*AVDD
001 = 0.16*AVDD
010 = 0.14*AVDD
011 = 0.12*AVDD
100 = 0.10*AVDD
101 = 0.08*AVDD
110 = 0.06*AVDD
111 = 0.04*AVDD
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
72
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
MasterPort
7:5
RW
0h
POR
Port tied to the jack presence detection switch
000 = Port A
001 = Port B
010 = Port C
011 = Port D
100 = Port E
101 = Port F
Rsvd1
4
R
0h
N/A (Hard-coded)
RW
0h
POR
Reserved.
SlavePort
3:1
Port used as microphone input
When combo jack detection is enabled, Port presence detection as shown in
the pin complex is not sensed directly by the sense input but is inferred by the
load placed on the Vref_Output associated with the port
000 = Port A
001 = Port B
010 = Port C
011 = Port D;100 = Port E
101 = Port F
Det-en
0
R
0h
POR
0h = disable combo jact detection 1h = enable combo jact detection
7.4.25.
Reg
AFG (NID = 01h): VSPwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
7D8h
Get
FD800h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:2
R
00000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
73
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
D5
1
RW
0h
POR - ELR
Vendor specific D5 power state, only entered once the part is already in D3cold
(this bit must be set before the command to enter D3cold). If set, this bit overrides the D4 bit (bit 0). Includes the power savings of D4, but additionally powers down GPIO pins, the VAG amp, and the HP amps. Exits this power state
via POR or rising edge of Link Reset.
D4
0
RW
0h
POR - ELR
Vendor specific D4 power state, only entered once the part is already in D3cold
(this bit must be set before the command to enter D3cold). If the D5 bit (bit 1)
is set, this bit is overridden. Includes the power savings of D3cold, but additionally powers down the HDA interface (no responses). Exit this power state
via POR or rising edge of Link Reset.
7.4.26.
Reg
AFG (NID = 01h): AnaPort
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
7EDh
7ECh
Set
Get
FEC00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:7
R
0000000h
N/A (Hard-coded)
RW
0h
POR
0h
POR
0h
POR
0h
POR
0h
POR
Reserved.
MonoPwd
6
Power down Mono Output.
FPwd
5
RW
Power down Port F.
EPwd
4
RW
Power down Port E.
DPwd
3
RW
Power down Port D.
CPwd
2
RW
Power down Port C.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
74
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
BPwd
1
RW
0h
POR
0h
POR
Power down Port B.
APwd
0
RW
Power down Port A.
7.4.27.
Reg
AFG (NID = 01h): AnaBTL
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
7F6h
7F5h
7F4h
Set
Get
FF400h
Field Name
Bits
R/W
Default
Reset
Rsvd6
31:22
R
0h
N/A (Hard-coded)
RW
0h
POR
Reserved.
SCStableTimeSel
21:22
The programmed time window for short circuit detect.
This is available on WB silicon revisions and beyond. Prior silicon revisions, these bits are reserved.
TSOverrideHiz
19
RW
0h
POR
Override Hiz for the BTL amplifier power stage circuit: set to 1 to Hiz, set back
to 0 to normal mode
TSTestMode
18
RW
0h
POR
Temp sense test mode select, 0=normal operation, 1=sensor will trip at ambient temperature.
TSForcePwd
17
RW
1h
POR
Temp sense force powerdown select
0=BTL will not be muted and powered down even if it is still overheating when
the volume is 0h
1=BTL will be muted and powered down even if it is still overheating when the
volume is 0h
TSInstantCutMode
16
RW
0h
POR
Temp sense instant cut mode
0=Two trip points used to smoothly adjust the volume
1=One single trip point used to set volume to wither 0 or max value (TI mode)
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
75
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
TSWait
15:12
RW
3h
POR
Temperature sensing wait time between volume increments
0h = 2ms (polling at 2ms)
1h = 4ms (polling at 4ms)
2h = 8ms (polling at 8ms)
3h = 16ms (polling at 16ms)
4h = 32ms (polling at 16ms)
5h = 64ms (polling at 16ms)
6h = 128ms (polling at 16ms)
7h = 256ms (polling at 16ms)
8h = 512ms (polling at 16ms)
9h = 1.024s (polling at 16ms)
Ah = 2.048s (polling at 16ms)
Bh = 4.096s (polling at 16ms)
Ch = 8.192s (polling at 16ms)
Dh = 16.384s (polling at 16ms)
Eh = 32.768s (polling at 16ms)
Fh = 65.536s (polling at 16ms).
TSTripHish
11:9
RW
3h
POR
Temp sense high trip point setting:
0h = 125 Degrees C
1h =140 Degrees C
2h = 155 Degrees C
3h = 170 Degrees C
4h = 185 C
5h = 200 C
6h = 215 C
7h = Reserved
TSOverrideRest
8
RW
0h
POR
Override reset for the BTL amplifier Temp sense circuit: set to 1 to recalculate, set
back to 0 to latch the value
TSTripLow
7:5
RW
2h
POR
Temp sense low trip point setting:
0h = 110 Degrees C
1h = 125 Degrees C
2h = 140 Degrees C
3h = 155 Degrees C
4h = 170 C
5h = 185 C
6h = 200 C
7h = 215 C
Rsvd1
4:0
R
0h
NA
Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
76
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.4.28.
Reg
AFG (NID = 01h): AnaBTLStatus
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
FF700h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:20
R
00h
N/A (Hard-coded)
R
0h
POR
Reserved.
TSTripHigh
19
Temp sense high trip point status
TSTripLow
18
R
0h
POR
Temp sense low trip point status
TSMute
17
R
0h
POR
Temp sense forced mute status for BTL amplifier
TSPwd
16
R
0h
POR
Temp sense forced powerdown status for BTL amplifier
TSLeftVol
15:8
R
0h
POR
Temp sense volume status for the BTL amplifier: 00000000b..11111111b =
Range specified for SPKVol field.
TSRightVol
7:0
R
0h
POR
Temp sense volume status for the BTL amplifier: 00000000b..11111111b =
Range specified for SPKVol field.
7.4.29.
Reg
AFG (NID = 01h): AnaCapless
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
7FAh
7F9h
7F8h
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
FF800h
77
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:26
R
00h
N/A (Hard-coded)
R
0h
POR
Reserved.
VRegSCDet
25
Capless regulator short circuit detect indicator.
ChargePumpSCDet
24
R
0h
POR
Capless charge pump short circuit detect indicator.
VRegSel
23:20
RW
5h
POR
Capless regulator output voltage multiply ratio
Bits [3..2] Reserved
Bits [1..0]:
00b = 2*Vbg
01b = 2.1*Vbg
10b = 2.2*Vbg
11b = 2.3*Vbg
VRegSCRstB
19
RW
0h
POR
Capless regulator short circuit detect reset: 0 = short circuit detect disabled, 1
= short circuit detect enabled.
VRegGndShort
18
RW
0h
POR
Ground the capless regulator output.
VRegPwd
17
RW
0h
POR
Capless regulator powerdown.
ChargePumpSCRstB
16
RW
0h
POR
Capless charge pump short circuit detect reset: 0 = short circuit detect disabled, 1 = short circuit detect enabled.
ChargePumpHiZ
15
RW
0h
POR
Hi-Z the capless charge pump outputs.
ChargePumpPwd
14
RW
0h
POR
Capless charge pump powerdown.
ChargePumpSplyDetOverride
13
RW
0h
POR
Capless charge pump supply detect override.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
78
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ChargePumpFreqBypass
12
RW
1h
POR
Capless charge pump frequency reg bypass.
ChargePumpClkRate
11:8
RW
8h
POR
Capless charge pump clock rate:
0000b = 800.0kHz (24MHz/30)
0001b = 750.0kHz (24MHz/32)
0010b = 706.9kHz (24MHz/34)
0011b = 666.7kHz (24MHz/36)
0100b = 631.6kHz (24MHz/38)
0101b = 600.0kHz (24MHz/40)
0110b = 571.4kHz (24MHz/42)
0111b = 545.5kHz (24MHz/44)
1000b = 800.0kHz (24MHz/30)
1001b = 857.1kHz (24MHz/28)
1010b = 923.1kHz (24MHz/26)
1011b = 1.000MHz (24MHz/24)
1100b = 1.091MHz (24MHz/22)
1101b = 1.200MHz (24MHz/20)
1110b = 1.333MHz (24MHz/18)
1111b = 1.500MHz (24MHz/16)
ChargePumpClkDiv
7:5
RW
4h
POR
Capless charge pump analog clock divider:
001b = No divide
010b = Divide by 2, 50% duty cycle
100b = Divide by 4, 50% duty cycle
110b = Divide by 2, 75% duty cycle
011b = Divide by 4, 75% duty cycle
111b = Divide by 4, 87.5% duty cycle
Other values undefined
ChargePumpClkSel
4
RW
0h
POR
Capless charge pump clock select: 0 = ring oscillator, 1 = charge pump clock
defined by AFGCaplessChargePumpClkRate[3:0] field below.
PadGnd
3
RW
0h
POR
Ground the output pad of the capless amplifiers.
InputGnd
2
RW
0h
POR
Ground the input to the capless output amplifiers.
Rsvd1
1
R
0h
NA
Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
79
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
AntiPopBypass
0
RW
0h
POR
0 = Enable anti-pop on the capless headphone; 1 = bypass anti-pop on the capless headphone.
7.4.30.
Reg
AFG (NID = 01h): Reset
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
7FFh
Get
FFF00h
Field Name
Bits
R/W
Default
Reset
Rsvd1
31:8
R
000000h
N/A (Hard-coded)
W
00h
N/A (Hard-coded)
Reserved.
Execute
7:0
Function Reset. Function Group reset is executed when the Set verb 7FF is
written with 8-bit payload of 00h. The codec should issue a response to acknowledge receipt of the verb, and then reset the affected Function Group and
all associated widgets to their power-on reset values. Some controls such as
Configuration Default controls should not be reset. Overlaps Response.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
80
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.4.31.
Reg
AFG (NID = 01h): AnaBeep
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
7EFh
7EEh
Set
Get
FEE00h / FEE00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:14
R
00000h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Detect
13
0: no beep present; 1: beep present.
GainAdj
12:10
RW
3h
POR
Analog PC Beep Gain in digital side 7h = -6dB, 6h = -12dB, 5h = -18dB, 4h = -24dB, 3h
= -30dB, 2h = -36dB, 1h = -42dB, 0h = -48dB.
ConvertEn
9
RW
1h
POR
Analog pc beep quantization enable (enabled only when both
""d2a_ana_pc_beep_det_en"" and ""d2a_ana_pc_beep_convert_en"" are 1).
DetectEn
8
RW
1h
POR
Analog pc beep detection enable 0h = disable 1h = enable.
Rsvd1
7:6
R
0h
N/A (Hard-coded)
Gain
5:4
RW
3h
POR
Analog PC Beep Gain: 0h = -24dB, 1h = -18dB, 2h = -12dB, 3h = -6dB.
CntSel
3:2
RW
0h
POR
Select counter delay.0h=64ms,1h = 128ms, 2h = 256ms, 3h = 512ms.
Mode
1:0
RW
2h
POR
Analog PC Beep Mode:
00b = Always disabled
01b = Always enabled
1Xb = Enabled during HDA Link Reset only
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
81
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.5.
PortA (NID = 0Ah): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
4h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
1h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
82
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
1h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.5.1.
Reg
PortA (NID = 0Ah): PinCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Ch
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:17
R
0000h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
EapdCap
16
EAPD support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
83
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
VrefCntrl
15:8
R
17h
N/A (Hard-coded)
Vref support:
bit 7 = Reserved
bit 6 = Reserved
bit 5 = 100% support (1 = yes, 0 = no)
bit 4 = 80% support (1 = yes, 0 = no)
bit 3 = Reserved
bit 2 = GND support (1 = yes, 0 = no)
bit 1 = 50% support (1 = yes, 0 = no)
bit 0 = Hi-Z support (1 = yes, 0 = no)
Rsvd1
7
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
BalancedIO
6
Balanced I/O support: 1 = yes, 0 = no.
InCap
5
R
1h
N/A (Hard-coded)
Input support: 1 = yes, 0 = no.
OutCap
4
R
1h
N/A (Hard-coded)
Output support: 1 = yes, 0 = no.
HdphDrvCap
3
R
1h
N/A (Hard-coded)
Headphone amp present: 1 = yes, 0 = no.
PresDtctCap
2
R
1h
N/A (Hard-coded)
Presence detection support: 1 = yes, 0 = no.
TrigRqd
1
R
0h
N/A (Hard-coded)
Trigger required for impedance sense: 1 = yes, 0 = no.
ImpSenseCap
0
R
0h
N/A (Hard-coded)
Impedance sense support: 1 = yes, 0 = no.
7.5.2.
Reg
PortA (NID = 0Ah): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F000Eh
84
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
03h
N/A (Hard-coded)
Number of NID entries in connection list.
7.5.3.
Reg
PortA (NID = 0Ah): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0200h
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
00h
N/A (Hard-coded)
DAC2 Converter widget (0x22)
ConL2
23:16
R
1Ch
N/A (Hard-coded)
MixerOutVol Selector widget (0x1C)
ConL1
15:8
R
14h
N/A (Hard-coded)
DAC1 Converter widget (0x14)
ConL0
7:0
R
13h
N/A (Hard-coded)
DAC0 Converter widget (0x13)
7.5.4.
Reg
PortA (NID = 0Ah): InAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
360h
B2000h
85
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Gain
1:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.5.5.
Reg
PortA (NID = 0Ah): InAmpRight
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
350h
Get
B0000h
Field Name
Bits
R/W
Default
Reset
Rsvd1
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Gain
1:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.5.6.
Reg
PortA (NID = 0Ah): ConSelectCtrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
701h
Get
F0100h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Index
1:0
Connection select control index.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
86
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.5.7.
Reg
PortA (NID = 0Ah): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.5.8.
Reg
PortA (NID = 0Ah): PinWCntrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
707h
F0700h
87
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
HPhnEn
7
Headphone amp enable: 1 = enabled, 0 = disabled.
OutEn
6
RW
0h
POR - DAFG - ULR
Output enable: 1 = enabled, 0 = disabled.
InEn
5
RW
0h
POR - DAFG - ULR
Input enable: 1 = enabled, 0 = disabled.
Rsvd1
4:3
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
VRefEn
2:0
Vref selection (See VrefCntrl field of PinCap parameter for supported selections):
000b= HI-Z
001b= 50%
010b= GND
011b= Reserved
100b= 80%
101b= 100%
110b= Reserved
111b= Reserved
7.5.9.
Reg
PortA (NID = 0Ah): UnsolResp
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
708h
Get
F0800h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
88
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
En
7
RW
0h
POR - DAFG - ULR
Unsolicited response enable (also enables Wake events for this Widget): 1 =
enabled, 0 = disabled.
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
00h
POR - DAFG - ULR
Reserved.
Tag
5:0
Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node.
7.5.10.
Reg
PortA (NID = 0Ah): ChSense
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
709h
Get
F0900h
Field Name
Bits
R/W
Default
Reset
PresDtct
31
R
0h
POR
Presence detection indicator: 1 = presence detected; 0 = presence not detected.
Rsvd
30:0
R
00000000h
N/A (Hard-coded)
Reserved.
7.5.11.
Reg
PortA (NID = 0Ah): EAPDBTLLR
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
70Ch
Get
F0C00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:2
R
00000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
89
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
EAPD
1
RW
1h
POR - DAFG - ULR
EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0
= set EAPD pin to 0.
Rsvd1
0
R
0h
N/A (Hard-coded)
Reserved.
7.5.12.
PortA (NID = 0Ah): ConfigDefault
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
71Fh
71Eh
71Dh
71Ch
Get
F1F00h / F1E00h / F1D00h / F1C00h
Field Name
Bits
R/W
Default
Reset
PortConnectivity
31:30
RW
0h
POR
Port connectivity:
0h = Port complex is connected to a jack
1h = No physical connection for port
2h = Fixed function device is attached
3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack)
Location
29:24
RW
02h
POR
Location
Bits [5..4]:
0h = External on primary chassis
1h = Internal
2h = Separate chassis
3h = Other
Bits [3..0]:
0h = N/A
1h = Rear
2h = Front
3h = Left
4h = Right
5h = Top
6h = Bottom
7h-9h = Special
Ah-Fh = Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
90
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Device
23:20
RW
Ah
POR
1h
POR
Default device:
0h = Line out
1h = Speaker
2h = HP out
3h = CD
4h = SPDIF Out
5h = Digital other out
6h = Modem line side
7h = Modem handset side
8h = Line in
9h = Aux
Ah = Mic in
Bh = Telephony
Ch = SPDIF In
Dh = Digital other in
Eh = Reserved
Fh = Other
ConnectionType
19:16
RW
Connection type:
0h = Unknown
1h = 1/8" stereo/mono
2h = 1/4" stereo/mono
3h = ATAPI internal
4h = RCA
5h = Optical
6h = Other digital
7h = Other analog
8h = Multichannel analog (DIN)
9h = XLR/Professional
Ah = RJ-11 (modem)
Bh = Combination
Ch-Eh = Reserved
Fh = Other
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
91
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Color
15:12
RW
9h
POR
0h
POR
2h
POR
Fh
POR
Color:
0h = Unknown
1h = Black
2h = Grey
3h = Blue
4h = Green
5h = Red
6h = Orange
7h = Yellow
8h = Purple
9h = Pink
Ah-Dh = Reserved
Eh = White
Fh = Other
Misc
11:8
RW
Miscellaneous:
Bits [3..1] = Reserved
Bit 0 = Jack detect override
Association
7:4
RW
Default assocation.
Sequence
3:0
RW
Sequence.
7.6.
PortB (NID = 0Bh): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
92
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Type
23:20
R
4h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
1h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
93
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.6.1.
Reg
PortB (NID = 0Bh): PinCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Ch
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:17
R
0000h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
EapdCap
16
EAPD support: 1 = yes, 0 = no.
VrefCntrl
15:8
R
00h
N/A (Hard-coded)
Vref support:
bit 7 = Reserved
bit 6 = Reserved
bit 5 = 100% support (1 = yes, 0 = no)
bit 4 = 80% support (1 = yes, 0 = no)
bit 3 = Reserved
bit 2 = GND support (1 = yes, 0 = no)
bit 1 = 50% support (1 = yes, 0 = no)
bit 0 = Hi-Z support (1 = yes, 0 = no)
Rsvd1
7
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
94
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
BalancedIO
6
R
0h
N/A (Hard-coded)
Balanced I/O support: 1 = yes, 0 = no.
InCap
5
R
0h
N/A (Hard-coded)
Input support: 1 = yes, 0 = no.
OutCap
4
R
1h
N/A (Hard-coded)
Output support: 1 = yes, 0 = no.
HdphDrvCap
3
R
1h
N/A (Hard-coded)
Headphone amp present: 1 = yes, 0 = no.
PresDtctCap
2
R
1h
N/A (Hard-coded)
Presence detection support: 1 = yes, 0 = no.
TrigRqd
1
R
0h
N/A (Hard-coded)
Trigger required for impedance sense: 1 = yes, 0 = no.
ImpSenseCap
0
R
0h
N/A (Hard-coded)
Impedance sense support: 1 = yes, 0 = no.
7.6.2.
Reg
PortB (NID = 0Bh): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Eh
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
03h
N/A (Hard-coded)
Number of NID entries in connection list.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
95
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.6.3.
Reg
PortB (NID = 0Bh): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0200h
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
00h
N/A (Hard-coded)
DAC2 Converter widget (0x22)
ConL2
23:16
R
1Ch
N/A (Hard-coded)
MixerOutVol Selector widget (0x1C)
ConL1
15:8
R
14h
N/A (Hard-coded)
DAC1 Converter widget (0x14)
ConL0
7:0
R
13h
N/A (Hard-coded)
DAC0 Converter widget (0x13)
7.6.4.
Reg
PortB (NID = 0Bh): ConSelectCtrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
701h
Get
F0100h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Index
1:0
Connection select control index.
7.6.5.
Reg
PortB (NID = 0Bh): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
705h
F0500h
96
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.6.6.
Reg
PortB (NID = 0Bh): PinWCntrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
707h
Get
F0700h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
HPhnEn
7
Headphone amp enable: 1 = enabled, 0 = disabled.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
97
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
OutEn
6
RW
0h
POR - DAFG - ULR
Output enable: 1 = enabled, 0 = disabled.
Rsvd1
5:0
RW
00h
N/A (Hard-coded)
Reserved.
7.6.7.
Reg
PortB (NID = 0Bh): UnsolResp
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
708h
Get
F0800h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
En
7
Unsolicited response enable (also enables Wake events for this Widget): 1 =
enabled, 0 = disabled.
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
00h
POR - DAFG - ULR
Reserved.
Tag
5:0
Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node.
7.6.8.
Reg
PortB (NID = 0Bh): ChSense
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
709h
F0900h
98
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
PresDtct
31
R
0h
POR
Presence detection indicator: 1 = presence detected; 0 = presence not detected.
Rsvd
30:0
R
00000000h
N/A (Hard-coded)
Reserved.
7.6.9.
Reg
PortB (NID = 0Bh): EAPDBTLLR
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
70Ch
Get
F0C00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:2
R
00000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
EAPD
1
EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0
= set EAPD pin to 0.
Rsvd1
0
R
0h
N/A (Hard-coded)
Reserved.
7.6.10.
PortB (NID = 0Bh): ConfigDefault
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
71Fh
71Eh
71Dh
71Ch
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F1F00h / F1E00h / F1D00h / F1C00h
99
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
PortConnectivity
31:30
RW
0h
POR
Port connectivity:
0h = Port complex is connected to a jack
1h = No physical connection for port
2h = Fixed function device is attached
3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack)
Location
29:24
RW
02h
POR
Location
Bits [5..4]:
0h = External on primary chassis
1h = Internal
2h = Separate chassis
3h = Other
Bits [3..0]:
0h = N/A
1h = Rear
2h = Front
3h = Left
4h = Right
5h = Top
6h = Bottom
7h-9h = Special
Ah-Fh = Reserved
Device
23:20
RW
2h
POR
Default device:
0h = Line out
1h = Speaker
2h = HP out
3h = CD
4h = SPDIF Out
5h = Digital other out
6h = Modem line side
7h = Modem handset side
8h = Line in
9h = Aux
Ah = Mic in
Bh = Telephony
Ch = SPDIF In
Dh = Digital other in
Eh = Reserved
Fh = Other
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
100
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ConnectionType
19:16
RW
1h
POR
Connection type:
0h = Unknown
1h = 1/8" stereo/mono
2h = 1/4" stereo/mono
3h = ATAPI internal
4h = RCA
5h = Optical
6h = Other digital
7h = Other analog
8h = Multichannel analog (DIN)
9h = XLR/Professional
Ah = RJ-11 (modem)
Bh = Combination
Ch-Eh = Reserved
Fh = Other
Color
15:12
RW
4h
POR
0h
POR
1h
POR
Fh
POR
Color:
0h = Unknown
1h = Black
2h = Grey
3h = Blue
4h = Green
5h = Red
6h = Orange
7h = Yellow
8h = Purple
9h = Pink
Ah-Dh = Reserved
Eh = White
Fh = Other
Misc
11:8
RW
Miscellaneous:
Bits [3..1] = Reserved
Bit 0 = Jack detect override
Association
7:4
RW
Default assocation.
Sequence
3:0
RW
Sequence.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
101
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.7.
PortC (NID = 0Ch): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
4h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
1h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
102
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
1h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.7.1.
Reg
PortC (NID = 0Ch): PinCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Ch
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:17
R
0000h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
EapdCap
16
EAPD support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
103
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
VrefCntrl
15:8
R
17h
N/A (Hard-coded)
Vref support:
bit 7 = Reserved
bit 6 = Reserved
bit 5 = 100% support (1 = yes, 0 = no)
bit 4 = 80% support (1 = yes, 0 = no)
bit 3 = Reserved
bit 2 = GND support (1 = yes, 0 = no)
bit 1 = 50% support (1 = yes, 0 = no)
bit 0 = Hi-Z support (1 = yes, 0 = no)
Rsvd1
7
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
BalancedIO
6
Balanced I/O support: 1 = yes, 0 = no.
InCap
5
R
1h
N/A (Hard-coded)
Input support: 1 = yes, 0 = no.
OutCap
4
R
1h
N/A (Hard-coded)
Output support: 1 = yes, 0 = no.
HdphDrvCap
3
R
0h
N/A (Hard-coded)
Headphone amp present: 1 = yes, 0 = no.
PresDtctCap
2
R
1h
N/A (Hard-coded)
Presence detection support: 1 = yes, 0 = no.
TrigRqd
1
R
0h
N/A (Hard-coded)
Trigger required for impedance sense: 1 = yes, 0 = no.
ImpSenseCap
0
R
0h
N/A (Hard-coded)
Impedance sense support: 1 = yes, 0 = no.
7.7.2.
Reg
PortC (NID = 0Ch): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F000Eh
104
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
03h
N/A (Hard-coded)
Number of NID entries in connection list.
7.7.3.
Reg
PortC (NID = 0Ch): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0200h
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
00h
N/A (Hard-coded)
R
1Ch
N/A (Hard-coded)
Reserved
ConL2
23:16
MixerOutVol Selector widget (0x1C)
ConL1
15:8
R
14h
N/A (Hard-coded)
DAC1 Converter widget (0x14)
ConL0
7:0
R
13h
N/A (Hard-coded)
DAC0 Converter widget (0x13)
7.7.4.
Reg
PortC (NID = 0Ch): InAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
360h
B2000h
105
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Gain
1:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.7.5.
Reg
PortC (NID = 0Ch): InAmpRight
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
350h
Get
B0000h
Field Name
Bits
R/W
Default
Reset
Rsvd1
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Gain
1:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.7.6.
Reg
PortC (NID = 0Ch): ConSelectCtrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
701h
Get
F0100h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Index
1:0
Connection select control index.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
106
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.7.7.
Reg
PortC (NID = 0Ch): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.7.8.
Reg
PortC (NID = 0Ch): PinWCntrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
707h
F0700h
107
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:7
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
OutEn
6
Output enable: 1 = enabled, 0 = disabled.
InEn
5
RW
0h
POR - DAFG - ULR
Input enable: 1 = enabled, 0 = disabled.
Rsvd1
4:3
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
VRefEn
2:0
Vref selection (See VrefCntrl field of PinCap parameter for supported selections):
000b= HI-Z
001b= 50%
010b= GND
011b= Reserved
100b= 80%
101b= 100%
110b= Reserved
111b= Reserved
7.7.9.
Reg
PortC (NID = 0Ch): UnsolResp
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
708h
Get
F0800h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
En
7
Unsolicited response enable (also enables Wake events for this Widget): 1 =
enabled, 0 = disabled.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
108
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
00h
POR - DAFG - ULR
Reserved.
Tag
5:0
Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node.
7.7.10.
Reg
PortC (NID = 0Ch): ChSense
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
709h
Get
F0900h
Field Name
Bits
R/W
Default
Reset
PresDtct
31
R
0h
POR
Presence detection indicator: 1 = presence detected; 0 = presence not detected.
Rsvd
30:0
R
00000000h
N/A (Hard-coded)
Reserved.
7.7.11.
Reg
PortC (NID = 0Ch): EAPDBTLLR
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
70Ch
Get
F0C00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:2
R
00000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
EAPD
1
EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0
= set EAPD pin to 0.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
109
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
0
R
0h
N/A (Hard-coded)
Reserved.
7.7.12.
PortC (NID = 0Ch): ConfigDefault
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
71Fh
71Eh
71Dh
71Ch
Get
F1F00h / F1E00h / F1D00h / F1C00h
Field Name
Bits
R/W
Default
Reset
PortConnectivity
31:30
RW
0h
POR
Port connectivity:
0h = Port complex is connected to a jack
1h = No physical connection for port
2h = Fixed function device is attached
3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack)
Location
29:24
RW
01h
POR
Location
Bits [5..4]:
0h = External on primary chassis
1h = Internal
2h = Separate chassis
3h = Other
Bits [3..0]:
0h = N/A
1h = Rear
2h = Front
3h = Left
4h = Right
5h = Top
6h = Bottom
7h-9h = Special
Ah-Fh = Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
110
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Device
23:20
RW
Ah
POR
1h
POR
Default device:
0h = Line out
1h = Speaker
2h = HP out
3h = CD
4h = SPDIF Out
5h = Digital other out
6h = Modem line side
7h = Modem handset side
8h = Line in
9h = Aux
Ah = Mic in
Bh = Telephony
Ch = SPDIF In
Dh = Digital other in
Eh = Reserved
Fh = Other
ConnectionType
19:16
RW
Connection type:
0h = Unknown
1h = 1/8" stereo/mono
2h = 1/4" stereo/mono
3h = ATAPI internal
4h = RCA
5h = Optical
6h = Other digital
7h = Other analog
8h = Multichannel analog (DIN)
9h = XLR/Professional
Ah = RJ-11 (modem)
Bh = Combination
Ch-Eh = Reserved
Fh = Other
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
111
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Color
15:12
RW
9h
POR
0h
POR
2h
POR
1h
POR
Color:
0h = Unknown
1h = Black
2h = Grey
3h = Blue
4h = Green
5h = Red
6h = Orange
7h = Yellow
8h = Purple
9h = Pink
Ah-Dh = Reserved
Eh = White
Fh = Other
Misc
11:8
RW
Miscellaneous:
Bits [3..1] = Reserved
Bit 0 = Jack detect override
Association
7:4
RW
Default assocation.
Sequence
3:0
RW
Sequence.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
112
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.8.
PortD (NID = 0Dh): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
4h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
113
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.8.1.
Reg
PortD (NID = 0Dh): PinCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Ch
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:17
R
0000h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
EapdCap
16
EAPD support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
114
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
VrefCntrl
15:8
R
00h
N/A (Hard-coded)
Vref support:
bit 7 = Reserved
bit 6 = Reserved
bit 5 = 100% support (1 = yes, 0 = no)
bit 4 = 80% support (1 = yes, 0 = no)
bit 3 = Reserved
bit 2 = GND support (1 = yes, 0 = no)
bit 1 = 50% support (1 = yes, 0 = no)
bit 0 = Hi-Z support (1 = yes, 0 = no)
Rsvd1
7
R
0h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
BalancedIO
6
Balanced I/O support: 1 = yes, 0 = no.
InCap
5
R
0h
N/A (Hard-coded)
Input support: 1 = yes, 0 = no.
OutCap
4
R
1h
N/A (Hard-coded)
Output support: 1 = yes, 0 = no.
HdphDrvCap
3
R
0h
N/A (Hard-coded)
Headphone amp present: 1 = yes, 0 = no.
PresDtctCap
2
R
0h
N/A (Hard-coded)
Presence detection support: 1 = yes, 0 = no.
TrigRqd
1
R
0h
N/A (Hard-coded)
Trigger required for impedance sense: 1 = yes, 0 = no.
ImpSenseCap
0
R
0h
N/A (Hard-coded)
Impedance sense support: 1 = yes, 0 = no.
7.8.2.
Reg
PortD (NID = 0Dh): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F000Eh
115
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
03h
N/A (Hard-coded)
Number of NID entries in connection list.
7.8.3.
Reg
PortD (NID = 0Dh): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0200h
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
00h
N/A (Hard-coded)
R
1Ch
N/A (Hard-coded)
Reserved
ConL2
23:16
MixerOutVol Selector widget (0x1C)
ConL1
15:8
R
14h
N/A (Hard-coded)
DAC1 Converter widget (0x14)
ConL0
7:0
R
13h
N/A (Hard-coded)
DAC0 Converter widget (0x13)
7.8.4.
Reg
PortD (NID = 0Dh): ConSelectCtrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
701h
F0100h
116
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Index
1:0
Connection select control index.
7.8.5.
Reg
PortD (NID = 0Dh): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
117
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.8.6.
Reg
PortD (NID = 0Dh): PinWCntrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
707h
Get
F0700h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:7
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
OutEn
6
Output enable: 1 = enabled, 0 = disabled.
Rsvd1
5:0
R
0h
N/A (Hard-coded)
Reserved.
7.8.7.
Reg
PortD (NID = 0Dh): EAPDBTLLR
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
70Ch
Get
F0C00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:2
R
00000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
EAPD
1
EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0
= set EAPD pin to 0.
Rsvd1
0
R
0h
N/A (Hard-coded)
Reserved.
7.8.8.
PortD (NID = 0Dh): ConfigDefault
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
71Fh
71Eh
71Dh
71Ch
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
118
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.8.8.
Reg
PortD (NID = 0Dh): ConfigDefault
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Get
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
F1F00h / F1E00h / F1D00h / F1C00h
Field Name
Bits
R/W
Default
Reset
PortConnectivity
31:30
RW
2h
POR
Port connectivity:
0h = Port complex is connected to a jack
1h = No physical connection for port
2h = Fixed function device is attached
3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack)
Location
29:24
RW
10h
POR
Location
Bits [5..4]:
0h = External on primary chassis
1h = Internal
2h = Separate chassis
3h = Other
Bits [3..0]:
0h = N/A
1h = Rear
2h = Front
3h = Left
4h = Right
5h = Top
6h = Bottom
7h-9h = Special
Ah-Fh = Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
119
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Device
23:20
RW
1h
POR
7h
POR
Default device:
0h = Line out
1h = Speaker
2h = HP out
3h = CD
4h = SPDIF Out
5h = Digital other out
6h = Modem line side
7h = Modem handset side
8h = Line in
9h = Aux
Ah = Mic in
Bh = Telephony
Ch = SPDIF In
Dh = Digital other in
Eh = Reserved
Fh = Other
ConnectionType
19:16
RW
Connection type:
0h = Unknown
1h = 1/8" stereo/mono
2h = 1/4" stereo/mono
3h = ATAPI internal
4h = RCA
5h = Optical
6h = Other digital
7h = Other analog
8h = Multichannel analog (DIN)
9h = XLR/Professional
Ah = RJ-11 (modem)
Bh = Combination
Ch-Eh = Reserved
Fh = Other
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
120
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Color
15:12
RW
0h
POR
1h
POR
1h
POR
0h
POR
Color:
0h = Unknown
1h = Black
2h = Grey
3h = Blue
4h = Green
5h = Red
6h = Orange
7h = Yellow
8h = Purple
9h = Pink
Ah-Dh = Reserved
Eh = White
Fh = Other
Misc
11:8
RW
Miscellaneous:
Bits [3..1] = Reserved
Bit 0 = Jack detect override
Association
7:4
RW
Default assocation.
Sequence
3:0
RW
Sequence.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
121
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.9.
(NID = 0Eh): Vendor Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
122
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.10. PortF (NID = 0Fh): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
4h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
1h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
123
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
1h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.10.1.
Reg
PortF (NID = 0Fh): PinCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Ch
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:17
R
0000h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
EapdCap
16
EAPD support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
124
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
VrefCntrl
15:8
R
00h
N/A (Hard-coded)
Vref support:
bit 7 = Reserved
bit 6 = Reserved
bit 5 = 100% support (1 = yes, 0 = no)
bit 4 = 80% support (1 = yes, 0 = no)
bit 3 = Reserved
bit 2 = GND support (1 = yes, 0 = no)
bit 1 = 50% support (1 = yes, 0 = no)
bit 0 = Hi-Z support (1 = yes, 0 = no)
Rsvd1
7
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
BalancedIO
6
Balanced I/O support: 1 = yes, 0 = no.
InCap
5
R
1h
N/A (Hard-coded)
Input support: 1 = yes, 0 = no.
OutCap
4
R
0h
N/A (Hard-coded)
Output support: 1 = yes, 0 = no.
HdphDrvCap
3
R
0h
N/A (Hard-coded)
Headphone amp present: 1 = yes, 0 = no.
PresDtctCap
2
R
1h
N/A (Hard-coded)
Presence detection support: 1 = yes, 0 = no.
TrigRqd
1
R
0h
N/A (Hard-coded)
Trigger required for impedance sense: 1 = yes, 0 = no.
ImpSenseCap
0
R
0h
N/A (Hard-coded)
Impedance sense support: 1 = yes, 0 = no.
7.10.2.
Reg
PortF (NID = 0Fh): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F000Eh
125
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
03h
N/A (Hard-coded)
Number of NID entries in connection list.
7.10.3.
Reg
PortF (NID = 0Fh): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0200h
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
00h
N/A (Hard-coded)
R
1Ch
N/A (Hard-coded)
Reserved
ConL2
23:16
MixerOutVol Selector widget (0x1C)
ConL1
15:8
R
14h
N/A (Hard-coded)
DAC1 Converter widget (0x14)
ConL0
7:0
R
13h
N/A (Hard-coded)
DAC0 Converter widget (0x13)
7.10.4.
Reg
PortF (NID = 0Fh): InAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
360h
B2000h
126
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Gain
1:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.10.5.
Reg
PortF (NID = 0Fh): InAmpRight
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
350h
Get
B0000h
Field Name
Bits
R/W
Default
Reset
Rsvd1
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Gain
1:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.10.6.
Reg
PortF (NID = 0Fh): ConSelectCtrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
701h
Get
F0100h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Index
1:0
Connection select control index.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
127
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.10.7.
Reg
PortF (NID = 0Fh): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.10.8.
Reg
PortF (NID = 0Fh): PinWCntrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
707h
F0700h
128
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:7
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
OutEn
6
Output enable: 1 = enabled, 0 = disabled.
InEn
5
RW
0h
POR - DAFG - ULR
Input enable: 1 = enabled, 0 = disabled.
Rsvd1
4:3
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
VRefEn
2:0
Vref selection (See VrefCntrl field of PinCap parameter for supported selections):
000b= HI-Z
001b= 50%
010b= GND
011b= Reserved
100b= 80%
101b= 100%
110b= Reserved
111b= Reserved
7.10.9.
Reg
PortF (NID = 0Fh): UnsolResp
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
708h
Get
F0800h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
En
7
Unsolicited response enable (also enables Wake events for this Widget): 1 =
enabled, 0 = disabled.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
129
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
00h
POR - DAFG - ULR
Reserved.
Tag
5:0
Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node.
7.10.10. PortF (NID = 0Fh): ChSense
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
709h
Get
F0900h
Field Name
Bits
R/W
Default
Reset
PresDtct
31
R
0h
POR
Presence detection indicator: 1 = presence detected; 0 = presence not detected.
Rsvd
30:0
R
00000000h
N/A (Hard-coded)
Reserved.
7.10.11. PortF (NID = 0Fh): EAPDBTLLR
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
70Ch
Get
F0C00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:2
R
00000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
EAPD
1
EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0
= set EAPD pin to 0.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
130
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
0
R
0h
N/A (Hard-coded)
Reserved.
7.10.12. PortF (NID = 0Fh): ConfigDefault
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
71Fh
71Eh
71Dh
71Ch
Get
F1F00h / F1E00h / F1D00h / F1C00h
Field Name
Bits
R/W
Default
Reset
PortConnectivity
31:30
RW
0h
POR
Port connectivity:
0h = Port complex is connected to a jack
1h = No physical connection for port
2h = Fixed function device is attached
3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack)
Location
29:24
RW
01h
POR
Location
Bits [5..4]:
0h = External on primary chassis
1h = Internal
2h = Separate chassis
3h = Other
Bits [3..0]:
0h = N/A
1h = Rear
2h = Front
3h = Left
4h = Right
5h = Top
6h = Bottom
7h-9h = Special
Ah-Fh = Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
131
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Device
23:20
RW
8h
POR
1h
POR
Default device:
0h = Line out
1h = Speaker
2h = HP out
3h = CD
4h = SPDIF Out
5h = Digital other out
6h = Modem line side
7h = Modem handset side
8h = Line in
9h = Aux
Ah = Mic in
Bh = Telephony
Ch = SPDIF In
Dh = Digital other in
Eh = Reserved
Fh = Other
ConnectionType
19:16
RW
Connection type:
0h = Unknown
1h = 1/8" stereo/mono
2h = 1/4" stereo/mono
3h = ATAPI internal
4h = RCA
5h = Optical
6h = Other digital
7h = Other analog
8h = Multichannel analog (DIN)
9h = XLR/Professional
Ah = RJ-11 (modem)
Bh = Combination
Ch-Eh = Reserved
Fh = Other
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
132
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Color
15:12
RW
3h
POR
0h
POR
2h
POR
Eh
POR
Color:
0h = Unknown
1h = Black
2h = Grey
3h = Blue
4h = Green
5h = Red
6h = Orange
7h = Yellow
8h = Purple
9h = Pink
Ah-Dh = Reserved
Eh = White
Fh = Other
Misc
11:8
RW
Miscellaneous:
Bits [3..1] = Reserved
Bit 0 = Jack detect override
Association
7:4
RW
Default assocation.
Sequence
3:0
RW
Sequence.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
133
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.11. (NID = 10h): Vendor Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
134
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.12. DMic0 (NID = 11h): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
4h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
DigitalStrm
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
0h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnsolCap
7
R
1h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
135
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
1h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.12.1.
Reg
DMic0 (NID = 11h): PinCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Ch
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:17
R
0000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
EapdCap
16
EAPD support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
136
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
VRefCntrl
15:8
R
00h
N/A (Hard-coded)
Vref support:
bit 7 = Reserved
bit 6 = Reserved
bit 5 = 100% support (1 = yes, 0 = no)
bit 4 = 80% support (1 = yes, 0 = no)
bit 3 = Reserved
bit 2 = GND support (1 = yes, 0 = no)
bit 1 = 50% support (1 = yes, 0 = no)
bit 0 = Hi-Z support (1 = yes, 0 = no)
Rsvd1
7
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
BalancedIO
6
Balanced I/O support: 1 = yes, 0 = no.
InCap
5
R
1h
N/A (Hard-coded)
Input support: 1 = yes, 0 = no.
OutCap
4
R
0h
N/A (Hard-coded)
Output support: 1 = yes, 0 = no.
HPhnDrvCap
3
R
0h
N/A (Hard-coded)
Headphone amp present: 1 = yes, 0 = no.
PresDtctCap
2
R
1h
N/A (Hard-coded)
Presence detection support: 1 = yes, 0 = no.
TrigRqd
1
R
0h
N/A (Hard-coded)
Trigger required for impedance sense: 1 = yes, 0 = no.
ImpSenseCap
0
R
0h
N/A (Hard-coded)
Impedance sense support: 1 = yes, 0 = no.
7.12.2.
Reg
DMic0 (NID = 11h): InAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
360h
B2000h
137
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Gain
1:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.12.3.
Reg
DMic0 (NID = 11h): InAmpRight
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
350h
Get
B0000h
Field Name
Bits
R/W
Default
Reset
Rsvd1
31:2
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Gain
1:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.12.4.
Reg
DMic0 (NID = 11h): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
138
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.12.5.
Reg
DMic0 (NID = 11h): PinWCntrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
707h
Get
F0700h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:6
R
0000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
InEn
5
Input enable: 1 = enabled, 0 = disabled.
Rsvd1
4:0
R
00h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
139
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.12.6.
Reg
DMic0 (NID = 11h): UnsolResp
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
708h
Get
F0800h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
En
7
Unsolicited response enable (also enables Wake events for this Widget): 1 =
enabled, 0 = disabled.
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
00h
POR - DAFG - ULR
Reserved.
Tag
5:0
Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node.
7.12.7.
Reg
DMic0 (NID = 11h): ChSense
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
709h
Get
F0900h
Field Name
Bits
R/W
Default
Reset
PresDtct
31
R
0h
POR
Presence detection indicator: 1 = presence detected; 0 = presence not detected.
Rsvd
30:0
R
00000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
140
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.12.8.
DMic0 (NID = 11h): ConfigDefault
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
71Fh
71Eh
71Dh
71Ch
Get
F1F00h / F1E00h / F1D00h / F1C00h
Field Name
Bits
R/W
Default
Reset
PortConnectivity
31:30
RW
2h
POR
Port connectivity:
0h = Port complex is connected to a jack
1h = No physical connection for port
2h = Fixed function device is attached
3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack)
Location
29:24
RW
10h
POR
Location
Bits [5..4]:
0h = External on primary chassis
1h = Internal
2h = Separate chassis
3h = Other
Bits [3..0]:
0h = N/A
1h = Rear
2h = Front
3h = Left
4h = Right
5h = Top
6h = Bottom
7h-9h = Special
Ah-Fh = Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
141
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Device
23:20
RW
Ah
POR
3h
POR
Default device:
0h = Line out
1h = Speaker
2h = HP out
3h = CD
4h = SPDIF Out
5h = Digital other out
6h = Modem line side
7h = Modem handset side
8h = Line in
9h = Aux
Ah = Mic in
Bh = Telephony
Ch = SPDIF In
Dh = Digital other in
Eh = Reserved
Fh = Other
ConnectionType
19:16
RW
Connection type:
0h = Unknown
1h = 1/8" stereo/mono
2h = 1/4" stereo/mono
3h = ATAPI internal
4h = RCA
5h = Optical
6h = Other digital
7h = Other analog
8h = Multichannel analog (DIN)
9h = XLR/Professional
Ah = RJ-11 (modem)
Bh = Combination
Ch-Eh = Reserved
Fh = Other
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
142
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Color
15:12
RW
0h
POR
1h
POR
3h
POR
0h
POR
Color:
0h = Unknown
1h = Black
2h = Grey
3h = Blue
4h = Green
5h = Red
6h = Orange
7h = Yellow
8h = Purple
9h = Pink
Ah-Dh = Reserved
Eh = White
Fh = Other
Misc
11:8
RW
Miscellaneous:
Bits [3..1] = Reserved
Bit 0 = Jack detect override
Association
7:4
RW
Default assocation.
Sequence
3:0
RW
Sequence.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
143
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.13. (NID = 12h): Vendor Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
144
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.14. DAC0 (NID = 13h): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Dh
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
0h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
145
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
1h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.14.1.
Reg
DAC0 (NID = 13h): Cnvtr
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Byte 1 (Bits 7:0)
2h
Get
A0000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:16
R
0000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
StrmType
15
Stream type: 1 = Non-PCM, 0 = PCM.
FrmtSmplRate
14
RW
0h
POR - DAFG - ULR
Sample base rate: 1 = 44.1kHz, 0 = 48kHz.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
146
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
SmplRateMultp
13:11
RW
0h
POR - DAFG - ULR
Sample base rate multiple:
000b= x1 (48kHz/44.1kHz or less)
001b= x2 (96kHz/88.2kHz/32kHz)
010b= x3 (144kHz)
011b= x4 (192kHz/176.4kHz)
100b-111b Reserved
SmplRateDiv
10:8
RW
0h
POR - DAFG - ULR
Sample base rate divider:
000b= Divide by 1 (48kHz/44.1kHz)
001b= Divide by 2 (24kHz/20.05kHz)
010b= Divide by 3 (16kHz/32kHz)
011b= Divide by 4 (11.025kHz)
100b= Divide by 5 (9.6kHz)
101b= Divide by 6 (8kHz)
110b= Divide by 7
111b= Divide by 8 (6kHz)
Rsvd1
7
R
0h
N/A (Hard-coded)
RW
3h
POR - DAFG - ULR
1h
POR - DAFG - ULR
Reserved.
BitsPerSmpl
6:4
Bits per sample:
000b= 8 bits
001b= 16 bits
010b= 20 bits
011b= 24 bits
100b= 32 bits
101b-111b= Reserved
NmbrChan
3:0
RW
Total number of channels in the stream assigned to this converter:
0000b-1111b= 1-16 channels.
7.14.2.
Reg
DAC0 (NID = 13h): OutAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
3A0h
BA000h
147
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Gain
6:0
RW
7Fh
POR - DAFG - ULR
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.14.3.
Reg
DAC0 (NID = 13h): OutAmpRight
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
390h
Get
B8000h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Gain
6:0
RW
7Fh
POR - DAFG - ULR
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.14.4.
Reg
DAC0 (NID = 13h): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
148
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
SettingsReset
10
R
1h
POR - DAFG - ULR
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
3h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.14.5.
Reg
DAC0 (NID = 13h): CnvtrID
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
706h
Get
F0600h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - S&DAFG - LR - PS
Reserved.
Strm
7:4
Stream ID: 0h = Converter "off", 1h-Fh = valid ID's.
Ch
3:0
RW
0h
POR - S&DAFG - LR - PS
Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter).
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
149
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.14.6.
Reg
DAC0 (NID = 13h): EAPDBTLLR
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
70Ch
Get
F0C00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:3
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
SwapEn
2
Swap enable: 1 = L/R swap enabled, 0 = L/R swap disabled.
Rsvd1
1:0
R
0h
N/A (Hard-coded)
Reserved.
7.15. DAC1 (NID = 14h): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
150
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Delay
19:16
R
Dh
N/A (Hard-coded)
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
0h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
1h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
151
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.15.1.
Reg
DAC1 (NID = 14h): Cnvtr
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Byte 1 (Bits 7:0)
2h
Get
A0000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:16
R
0000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
StrmType
15
Stream type: 1 = Non-PCM, 0 = PCM.
FrmtSmplRate
14
RW
0h
POR - DAFG - ULR
Sample base rate: 1 = 44.1kHz, 0 = 48kHz.
SmplRateMultp
13:11
RW
0h
POR - DAFG - ULR
Sample base rate multiple:
000b= x1 (48kHz/44.1kHz or less)
001b= x2 (96kHz/88.2kHz/32kHz)
010b= x3 (144kHz)
011b= x4 (192kHz/176.4kHz)
100b-111b Reserved
SmplRateDiv
10:8
RW
0h
POR - DAFG - ULR
Sample base rate divider:
000b= Divide by 1 (48kHz/44.1kHz)
001b= Divide by 2 (24kHz/20.05kHz)
010b= Divide by 3 (16kHz/32kHz)
011b= Divide by 4 (11.025kHz)
100b= Divide by 5 (9.6kHz)
101b= Divide by 6 (8kHz)
110b= Divide by 7
111b= Divide by 8 (6kHz)
Rsvd1
7
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
152
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
BitsPerSmpl
6:4
RW
3h
POR - DAFG - ULR
1h
POR - DAFG - ULR
Bits per sample:
000b= 8 bits
001b= 16 bits
010b= 20 bits
011b= 24 bits
100b= 32 bits
101b-111b= Reserved
NmbrChan
3:0
RW
Total number of channels in the stream assigned to this converter:
0000b-1111b= 1-16 channels.
7.15.2.
Reg
DAC1 (NID = 14h): OutAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
3A0h
Get
BA000h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Gain
6:0
RW
7Fh
POR - DAFG - ULR
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.15.3.
Reg
DAC1 (NID = 14h): OutAmpRight
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
390h
B8000h
153
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Gain
6:0
RW
7Fh
POR - DAFG - ULR
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.15.4.
Reg
DAC1 (NID = 14h): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
154
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Set
1:0
RW
3h
POR - DAFG - LR
Current power state setting for this widget.
7.15.5.
Reg
DAC1 (NID = 14h): CnvtrID
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
706h
Get
F0600h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - S&DAFG - LR - PS
Reserved.
Strm
7:4
Stream ID: 0h = Converter "off", 1h-Fh = valid ID's.
Ch
3:0
RW
0h
POR - S&DAFG - LR - PS
Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter).
7.15.6.
Reg
DAC1 (NID = 14h): EAPDBTLLR
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
70Ch
Get
F0C00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:3
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
SwapEn
2
Swap enable: 1 = L/R swap enabled, 0 = L/R swap disabled.
Rsvd1
1:0
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
155
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.16. ADC0 (NID = 15h): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Dh
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
156
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ProcWidget
6
R
1h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.16.1.
Reg
ADC0 (NID = 15h): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Eh
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
01h
N/A (Hard-coded)
Number of NID entries in connection list.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
157
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.16.2.
Reg
ADC0 (NID = 15h): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0200h
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
00h
N/A (Hard-coded)
00h
N/A (Hard-coded)
00h
N/A (Hard-coded)
20h
N/A (Hard-coded)
Unused list entry.
ConL2
23:16
R
Unused list entry.
ConL1
15:8
R
Unused list entry.
ConL0
7:0
R
ADC0Mux Selector widget (0x17)
7.16.3.
Reg
ADC0 (NID = 15h): Cnvtr
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Byte 1 (Bits 7:0)
2h
Get
A0000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:16
R
0000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
StrmType
15
Stream type: 1 = Non-PCM, 0 = PCM.
FrmtSmplRate
14
RW
0h
POR - DAFG - ULR
Sample base rate: 1 = 44.1kHz, 0 = 48kHz.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
158
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
SmplRateMultp
13:11
RW
0h
POR - DAFG - ULR
Sample base rate multiple:
000b= x1 (48kHz/44.1kHz or less)
001b= x2 (96kHz/88.2kHz/32kHz)
010b= x3 (144kHz)
011b= x4 (192kHz/176.4kHz)
100b-111b Reserved
SmplRateDiv
10:8
RW
0h
POR - DAFG - ULR
Sample base rate divider:
000b= Divide by 1 (48kHz/44.1kHz)
001b= Divide by 2 (24kHz/20.05kHz)
010b= Divide by 3 (16kHz/32kHz)
011b= Divide by 4 (11.025kHz)
100b= Divide by 5 (9.6kHz)
101b= Divide by 6 (8kHz)
110b= Divide by 7
111b= Divide by 8 (6kHz)
Rsvd1
7
R
0h
N/A (Hard-coded)
RW
3h
POR - DAFG - ULR
1h
POR - DAFG - ULR
Reserved.
BitsPerSmpl
6:4
Bits per sample:
000b= 8 bits
001b= 16 bits
010b= 20 bits
011b= 24 bits
100b= 32 bits
101b-111b= Reserved
NmbrChan
3:0
RW
Total number of channels in the stream assigned to this converter:
0000b-1111b= 1-16 channels.
7.16.4.
Reg
ADC0 (NID = 15h): ProcState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
703h
F0300h
159
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
HPFOCDIS
7
HPF offset calculation disable. 1 = calculation disabled; 0 = calculation enabled.
Rsvd1
6:2
R
00h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
ADCHPFByp
1:0
Processing State: 00b= bypass the ADC HPF ("off"), 01b-11b= ADC HPF is enabled ("on" or "benign").
7.16.5.
Reg
ADC0 (NID = 15h): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
160
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Act
5:4
R
3h
POR - DAFG - LR
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
3h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.16.6.
Reg
ADC0 (NID = 15h): CnvtrID
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
706h
Get
F0600h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - S&DAFG - LR - PS
Reserved.
Strm
7:4
Stream ID: 0h = Converter "off", 1h-Fh = valid ID's.
Ch
3:0
RW
0h
POR - S&DAFG - LR - PS
Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter).
7.17. ADC1 (NID = 1Bh): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F0009h
161
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Dh
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
ProcWidget
6
R
1h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
162
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.17.1.
Reg
ADC1 (NID = 1Bh): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Eh
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
01h
N/A (Hard-coded)
Number of NID entries in connection list.
7.17.2.
Reg
ADC1 (NID = 1Bh): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F0200h
163
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
00h
N/A (Hard-coded)
00h
N/A (Hard-coded)
00h
N/A (Hard-coded)
18h
N/A (Hard-coded)
Unused list entry.
ConL2
23:16
R
Unused list entry.
ConL1
15:8
R
Unused list entry.
ConL0
7:0
R
ADC1Mux widget (0x18)
7.17.3.
Reg
ADC1 (NID = 1Bh): Cnvtr
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Byte 1 (Bits 7:0)
2h
Get
A0000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:16
R
0000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
StrmType
15
Stream type: 1 = Non-PCM, 0 = PCM.
FrmtSmplRate
14
RW
0h
POR - DAFG - ULR
Sample base rate: 1 = 44.1kHz, 0 = 48kHz.
SmplRateMultp
13:11
RW
0h
POR - DAFG - ULR
Sample base rate multiple:
000b= x1 (48kHz/44.1kHz or less)
001b= x2 (96kHz/88.2kHz/32kHz)
010b= x3 (144kHz)
011b= x4 (192kHz/176.4kHz)
100b-111b Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
164
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
SmplRateDiv
10:8
RW
0h
POR - DAFG - ULR
Sample base rate divider:
000b= Divide by 1 (48kHz/44.1kHz)
001b= Divide by 2 (24kHz/20.05kHz)
010b= Divide by 3 (16kHz/32kHz)
011b= Divide by 4 (11.025kHz)
100b= Divide by 5 (9.6kHz)
101b= Divide by 6 (8kHz)
110b= Divide by 7
111b= Divide by 8 (6kHz)
Rsvd1
7
R
0h
N/A (Hard-coded)
RW
3h
POR - DAFG - ULR
1h
POR - DAFG - ULR
Reserved.
BitsPerSmpl
6:4
Bits per sample:
000b= 8 bits
001b= 16 bits
010b= 20 bits
011b= 24 bits
100b= 32 bits
101b-111b= Reserved
NmbrChan
3:0
RW
Total number of channels in the stream assigned to this converter:
0000b-1111b= 1-16 channels.
7.17.4.
Reg
ADC1 (NID = 1Bh): ProcState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
703h
Get
F0300h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
HPFOCDIS
7
HPF offset calculation disable. 1 = calculation disabled; 0 = calculation enabled.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
165
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
6:2
R
00h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
ADCHPFByp
1:0
Processing State: 00b= bypass the ADC HPF ("off"), 01b-11b= ADC HPF is enabled ("on" or "benign").
7.17.5.
Reg
ADC1 (NID = 1Bh): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
3h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
166
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.17.6.
Reg
ADC1 (NID = 1Bh): CnvtrID
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
706h
Get
F0600h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - S&DAFG - LR - PS
Reserved.
Strm
7:4
Stream ID: 0h = Converter "off", 1h-Fh = valid ID's.
Ch
3:0
RW
0h
POR - S&DAFG - LR - PS
Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter).
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
167
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.18. ADC0Mux (NID = 17h): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
3h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
DigitalStrm
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
168
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
UnsolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParamOvrd
3
R
1h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
1h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.18.1.
Reg
ADC0Mux (NID = 17h): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Eh
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
169
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
LForm
7
R
0h
N/A (Hard-coded)
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
05h
N/A (Hard-coded)
Number of NID entries in connection list.
7.18.2.
Reg
ADC0Mux (NID = 17h): ConLstEntry4
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0204h
Field Name
Bits
R/W
Default
Reset
ConL7
31:24
R
00h
N/A (Hard-coded)
R
00h
N/A (Hard-coded)
R
00h
N/A (Hard-coded)
R
11h
N/A (Hard-coded)
Unused list entry.
ConL6
23:16
Reserved
ConL5
15:8
Reserved
ConL4
7:0
DMIC0 widget (0x11)
7.18.3.
Reg
ADC0Mux (NID = 17h): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F0200h
170
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
0Fh
N/A (Hard-coded)
0Ch
N/A (Hard-coded)
0Ah
N/A (Hard-coded)
1Bh
N/A (Hard-coded)
Port F Pin widget (0x0F)
ConL2
23:16
R
Port C Pin widget (0x0C)
ConL1
15:8
R
Port A Pin widget (0x0A)
ConL0
7:0
R
Mixer Summing widget (0x1B)
7.18.4.
Reg
ADC0Mux (NID = 17h): OutAmpCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0012h
Field Name
Bits
R/W
Default
Reset
Mute
31
R
1h
N/A (Hard-coded)
Mute support: 1 = yes, 0 = no.
Rsvd3
30:23
R
00h
N/A (Hard-coded)
R
03h
N/A (Hard-coded)
Reserved.
StepSize
22:16
Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps.
Rsvd2
15
R
0h
N/A (Hard-coded)
R
2Eh
N/A (Hard-coded)
Reserved.
NumSteps
14:8
Number of gains steps (number of possible settings - 1).
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
171
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
7
R
0h
N/A (Hard-coded)
R
10h
N/A (Hard-coded)
Reserved.
Offset
6:0
Indicates which step is 0dB
7.18.5.
Reg
ADC0Mux (NID = 17h): OutAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
3A0h
Get
BA000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
10h
POR - DAFG - ULR
Reserved.
Gain
5:0
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.18.6.
Reg
ADC0Mux (NID = 17h): OutAmpRight
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
390h
B8000h
172
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
10h
POR - DAFG - ULR
Reserved.
Gain
5:0
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.18.7.
Reg
ADC0Mux (NID = 17h): ConSelectCtrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
701h
Get
F0100h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:3
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Index
2:0
Connection select control index.
7.18.8.
Reg
ADC0Mux (NID = 17h): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
705h
F0500h
173
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.18.9.
Reg
ADC0Mux (NID = 17h): EAPDBTLLR
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
70Ch
F0C00h
174
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:3
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
SwapEn
2
Swap enable: 1 = L/R swap enabled, 0 = L/R swap disabled.
Rsvd1
1:0
R
0h
N/A (Hard-coded)
Reserved.
7.19. ADC1Mux (NID = 18h): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
3h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
175
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
DigitalStrm
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnsolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParamOvrd
3
R
1h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
1h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
176
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.19.1.
Reg
ADC1Mux (NID = 18h): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Eh
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
05h
N/A (Hard-coded)
Number of NID entries in connection list.
7.19.2.
Reg
ADC1Mux (NID = 18h): ConLstEntry4
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0204h
Field Name
Bits
R/W
Default
Reset
ConL7
31:24
R
00h
N/A (Hard-coded)
R
00h
N/A (Hard-coded)
R
00h
N/A (Hard-coded)
R
11h
N/A (Hard-coded)
Unused list entry.
ConL6
23:16
Reserved.
ConL5
15:8
Reserved
ConL4
7:0
DMIC0 widget (0x11)
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
177
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.19.3.
Reg
ADC1Mux (NID = 18h): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0200h
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
0Fh
N/A (Hard-coded)
0Ch
N/A (Hard-coded)
0Ah
N/A (Hard-coded)
1Bh
N/A (Hard-coded)
Port F Pin widget (0x0F
ConL2
23:16
R
Port C Pin widget (0x0C)
ConL1
15:8
R
Port A Pin widget (0x0A)
ConL0
7:0
R
Mixer Summing widget (0x1B)
7.19.4.
Reg
ADC1Mux (NID = 18h): OutAmpCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0012h
Field Name
Bits
R/W
Default
Reset
Mute
31
R
1h
N/A (Hard-coded)
Mute support: 1 = yes, 0 = no.
Rsvd3
30:23
R
00h
N/A (Hard-coded)
R
03h
N/A (Hard-coded)
Reserved.
StepSize
22:16
Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps.
Rsvd2
15
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
178
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
NumSteps
14:8
R
2Eh
N/A (Hard-coded)
Number of gains steps (number of possible settings - 1).
Rsvd1
7
R
0h
N/A (Hard-coded)
R
10h
N/A (Hard-coded)
Reserved.
Offset
6:0
Indicates which step is 0dB
7.19.5.
Reg
ADC1Mux (NID = 18h): OutAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
3A0h
Get
BA000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
10h
POR - DAFG - ULR
Reserved.
Gain
5:0
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.19.6.
Reg
ADC1Mux (NID = 18h): OutAmpRight
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
390h
B8000h
179
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6
R
0h
N/A (Hard-coded)
RW
10h
POR - DAFG - ULR
Reserved.
Gain
5:0
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.19.7.
Reg
ADC1Mux (NID = 18h): ConSelectCtrl
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
701h
Get
F0100h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:3
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Index
2:0
Connection select control index.
7.19.8.
Reg
ADC1Mux (NID = 18h): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
180
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
SettingsReset
10
R
1h
POR - DAFG - ULR
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.19.9.
Reg
ADC1Mux (NID = 18h): EAPDBTLLR
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
70Ch
Get
F0C00h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:3
R
00000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
SwapEn
2
Swap enable: 1 = L/R swap enabled, 0 = L/R swap disabled.
Rsvd1
1:0
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
181
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.20. (NID = 19h): Vendor Reserved
7.21. (NID = 1Ah): Vendor Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
182
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.22. Mixer (NID = 1Bh): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
2h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
183
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
1h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
1h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.22.1.
Reg
Mixer (NID = 1Bh): InAmpCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Dh
Field Name
Bits
R/W
Default
Reset
Mute
31
R
1h
N/A (Hard-coded)
Mute support: 1 = yes, 0 = no.
Rsvd3
30:23
R
00h
N/A (Hard-coded)
R
05h
N/A (Hard-coded)
Reserved.
StepSize
22:16
Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
184
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
15
R
0h
N/A (Hard-coded)
R
1Fh
N/A (Hard-coded)
Reserved.
NumSteps
14:8
Number of gains steps (number of possible settings - 1).
Rsvd1
7
R
0h
N/A (Hard-coded)
R
17h
N/A (Hard-coded)
Reserved.
Offset
6:0
Indicates which step is 0dB
7.22.2.
Reg
Mixer (NID = 1Bh): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Eh
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
05h
N/A (Hard-coded)
Number of NID entries in connection list.
7.22.3.
Reg
Mixer (NID = 1Bh): ConLstEntry4
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F0204h
185
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ConL7
31:24
R
00h
N/A (Hard-coded)
00h
N/A (Hard-coded)
R
00h
N/A (Hard-coded)
R
0FEh
N/A (Hard-coded)
Unused list entry.
ConL6
23:16
R
Unused list entry.
ConL5
15:8
Reserved
ConL4
7:0
Port F Pin Widget (0x0F).
7.22.4.
Reg
Mixer (NID = 1Bh): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0200h
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
0Ch
N/A (Hard-coded)
Port C Pin widget (0x0C). Uses InAmpLeft3/InAmpRight3 controls.
ConL2
23:16
R
0Ah
N/A (Hard-coded)
Port A Pin widget (0x0A). Uses InAmpLeft2/InAmpRight2 controls.
ConL1
15:8
R
14h
N/A (Hard-coded)
DAC1 widget (0x14). Uses InAmpLeft1/InAmpRight1 controls.
ConL0
7:0
R
13h
N/A (Hard-coded)
DAC0 widget (0x13). Uses InAmpLeft0/InAmpRight0 controls.
7.22.5.
Reg
Mixer (NID = 1Bh): InAmpLeft0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
360h
B2000h
186
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.6.
Reg
Mixer (NID = 1Bh): InAmpRight0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
350h
Get
B0000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.7.
Reg
Mixer (NID = 1Bh): InAmpLeft1
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
361h
B2001h
187
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.8.
Reg
Mixer (NID = 1Bh): InAmpRight1
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
351h
Get
B0001h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.9.
Reg
Mixer (NID = 1Bh): InAmpLeft2
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
362h
B2002h
188
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.10. Mixer (NID = 1Bh): InAmpRight2
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
352h
Get
B0002h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.11. Mixer (NID = 1Bh): InAmpLeft3
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
363h
B2003h
189
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.12. Mixer (NID = 1Bh): InAmpRight3
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
353h
Get
B0003h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.13. Mixer (NID = 1Bh): InAmpLeft4
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
364h
B2004h
190
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.14. Mixer (NID = 1Bh): InAmpRight4
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
354h
Get
B0004h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.15. Mixer (NID = 1Bh): InAmpLeft5
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
365h
B2005h
191
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.16. Mixer (NID = 1Bh): InAmpRight5
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
355h
Get
B0005h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
17h
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see InAmpCap parameter pertaining to this widget).
7.22.17. Mixer (NID = 1Bh): PwrState
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Byte 1 (Bits 7:0)
705h
F0500h
192
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
7.23. MixerOutVol (NID = 1Ch): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
193
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Type
23:20
R
3h
N/A (Hard-coded)
0h
N/A (Hard-coded)
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
1h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
1h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
194
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
AmpParOvrd
3
R
1h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
1h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
7.23.1.
Reg
MixerOutVol (NID = 1Ch): ConLst
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F000Eh
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
LForm
7
Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit)
NID entries.
ConL
6:0
R
01h
N/A (Hard-coded)
Number of NID entries in connection list.
7.23.2.
Reg
MixerOutVol (NID = 1Ch): ConLstEntry0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
F0200h
195
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ConL3
31:24
R
00h
N/A (Hard-coded)
00h
N/A (Hard-coded)
00h
N/A (Hard-coded)
1Bh
N/A (Hard-coded)
Unused list entry.
ConL2
23:16
R
Unused list entry.
ConL1
15:8
R
Unused list entry.
ConL0
7:0
R
Mixer Summing widget (0x1B)
7.23.3.
Reg
MixerOutVol (NID = 1Ch): OutAmpCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0012h
Field Name
Bits
R/W
Default
Reset
Mute
31
R
1h
N/A (Hard-coded)
Mute support: 1 = yes, 0 = no.
Rsvd3
30:23
R
00h
N/A (Hard-coded)
R
05h
N/A (Hard-coded)
Reserved.
StepSize
22:16
Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps.
Rsvd2
15
R
0h
N/A (Hard-coded)
R
1Fh
N/A (Hard-coded)
Reserved.
NumSteps
14:8
Number of gains steps (number of possible settings - 1).
Rsvd1
7
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
196
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Offset
6:0
R
1Fh
N/A (Hard-coded)
Indicates which step is 0dB
7.23.4.
Reg
MixerOutVol (NID = 1Ch): OutAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
3A0h
Get
BA000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
1Fh
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.23.5.
Reg
MixerOutVol (NID = 1Ch): OutAmpRight
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
390h
Get
B8000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Mute
7
Amp mute: 1 = muted, 0 = not muted.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
197
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Rsvd1
6:5
R
0h
N/A (Hard-coded)
RW
1Fh
POR - DAFG - ULR
Reserved.
Gain
4:0
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.23.6.
Reg
MixerOutVol (NID = 1Ch): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
RW
0h
POR - DAFG - LR
Reserved.
Set
1:0
Current power state setting for this widget.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
198
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.24. (NID = 1Dh): Vendor Reserved
7.25. (NID = 1Eh): Vendor Reserved
7.26. (NID = 1Fh): Vendor Reserved
7.27. (NID = 20h): Vendor Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
199
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.28. DigBeep (NID = 21h): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:24
R
00h
N/A (Hard-coded)
R
7h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Rsvd3
19:11
Reserved.
PwrCntrl
10
Power state support: 1 = yes, 0 = no."
Rsvd2
9:4
R
0h
N/A (Hard-coded)
R
1h
N/A (Hard-coded)
Reserved
AmpParOvrd
3
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
1h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
Rsvd1
1:0
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
200
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.28.1.
Reg
DigBeep (NID = 21h): OutAmpCap
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0012h
Field Name
Bits
R/W
Default
Reset
Mute
31
R
1h
N/A (Hard-coded)
Mute support: 1 = yes, 0 = no.
Rsvd3
30:23
R
00h
N/A (Hard-coded)
R
17h
N/A (Hard-coded)
Reserved.
StepSize
22:16
Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps.
Rsvd2
15
R
0h
N/A (Hard-coded)
R
03h
N/A (Hard-coded)
Reserved.
NumSteps
14:8
Number of gains steps (number of possible settings - 1).
Rsvd1
7
R
0h
N/A (Hard-coded)
R
03h
N/A (Hard-coded)
Reserved.
Offset
6:0
Indicates which step is 0dB
7.28.2.
Reg
DigBeep (NID = 21h): OutAmpLeft
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
3A0h
Get
BA000h
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:8
R
000000h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
201
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Mute
7
RW
0h
POR - DAFG - ULR
Amp mute: 1 = muted, 0 = not muted.
Rsvd1
6:2
R
00h
N/A (Hard-coded)
RW
1h
POR - DAFG - ULR
Reserved.
Gain
1:0
Amp gain step number (see OutAmpCap parameter pertaining to this widget).
7.28.3.
Reg
DigBeep (NID = 21h): PwrState
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
705h
Get
F0500h
Field Name
Bits
R/W
Default
Reset
Rsvd4
31:11
R
000000h
N/A (Hard-coded)
R
1h
POR - DAFG - ULR
Reserved.
SettingsReset
10
Indicates if any persistent settings in this Widget have been reset. Cleared by
PwrState 'Get', or a 'Set' to any Verb in this Widget.
Rsvd3
9
R
0h
N/A (Hard-coded)
R
0h
POR - DAFG - ULR
Reserved.
Error
8
Error indicator: 1 = cannot enter requested power state, 0 = no problem with
requested power state.
Rsvd2
7:6
R
0h
N/A (Hard-coded)
R
3h
POR - DAFG - LR
Reserved.
Act
5:4
Actual power state of this widget.
Rsvd1
3:2
R
0h
N/A (Hard-coded)
Reserved.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
202
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
Set
1:0
RW
0h
POR - DAFG - LR
Current power state setting for this widget.
7.28.4.
Reg
DigBeep (NID = 21h): Gen
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
70Ah
Get
F0A00h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
00h
POR - DAFG - LR
Reserved.
Divider
7:0
Enable internal PC-Beep generation. Divider == 00h disables internal PC Beep
generation and enables normal operation of the codec. Divider != 00h generates the beep tone on all Pin Complexes that are currently configured as outputs. The HD Audio spec states that the beep tone frequency = (48kHz HD
Audio SYNC rate) / (4*Divider), producing tones from 47 Hz to 12 kHz (logarithmic scale).
7.28.5.
Reg
DigBeep (NID = 21h): Gain
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
77Ah
Get
F7A00h
Field Name
Bits
R/W
Default
Reset
Rsvd
31:3
R
000000h
N/A (Hard-coded)
RW
05h
POR - DAFG - LR
Reserved.
Divider
2:0
Digital PC Beep Gain adjust in digital side 0h = -9dB, 1h = -6dB, 2h = -3dB, 3h
= 0dB, 4h = +3db, 5h = +6db
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
203
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29. AdvancedFunctions (NID = 22h): WCap
Reg
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Byte 1 (Bits 7:0)
Set
Get
F0009h
This register is reset by POR.
Field Name
Bits
R/W
Default
Reset
Rsvd2
31:24
R
00h
N/A (Hard-coded)
R
Fh
N/A (Hard-coded)
0h
N/A (Hard-coded)
Reserved.
Type
23:20
Widget type:
0h = Out Converter
1h = In Converter
2h = Summing (Mixer)
3h = Selector (Mux)
4h = Pin Complex
5h = Power
6h = Volume Knob
7h = Beep Generator
8h-Eh = Reserved
Fh = Vendor Defined
Delay
19:16
R
Number of sample delays through widget.
Rsvd1
15:12
R
0h
N/A (Hard-coded)
R
0h
N/A (Hard-coded)
Reserved.
SwapCap
11
Left/right swap support: 1 = yes, 0 = no.
PwrCntrl
10
R
0h
N/A (Hard-coded)
Power state support: 1 = yes, 0 = no.
Dig
9
R
0h
N/A (Hard-coded)
Digital stream support: 1 = yes (digital), 0 = no (analog).
ConnList
8
R
0h
N/A (Hard-coded)
Connection list present: 1 = yes, 0 = no.
UnSolCap
7
R
0h
N/A (Hard-coded)
Unsolicited response support: 1 = yes, 0 = no.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
204
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Field Name
Bits
R/W
Default
Reset
ProcWidget
6
R
0h
N/A (Hard-coded)
Processing state support: 1 = yes, 0 = no.
Stripe
5
R
0h
N/A (Hard-coded)
Striping support: 1 = yes, 0 = no.
FormatOvrd
4
R
0h
N/A (Hard-coded)
Stream format override: 1 = yes, 0 = no.
AmpParOvrd
3
R
0h
N/A (Hard-coded)
Amplifier capabilities override: 1 = yes, no.
OutAmpPrsnt
2
R
0h
N/A (Hard-coded)
Output amp present: 1 = yes, 0 = no.
InAmpPrsnt
1
R
0h
N/A (Hard-coded)
Input amp present: 1 = yes, 0 = no.
Stereo
0
R
1h
N/A (Hard-coded)
Stereo stream support: 1 = yes (stereo), 0 = no (mono).
All registers are available when in normal mode through the HD Audio interface. Most are
implemented using vendor defined verbs but some (volume controls specifically) are supported through standard verbs at the pin widgets
7.29.1.
Reg
AdvancedFunctions (NID = 22h): Cntrl0
Byte 4 (Bits 31:24)
Byte 3 (Bits 23:16)
Byte 2 (Bits 15:8)
Set
Byte 1 (Bits 7:0)
770h:&7AFh
Get
F7700h: 7AF0h
This register is reset by POR.
Field Name
Bits
R/W
Default
Reset
Rsvd
31:8
R
000000h
N/A (Hard-coded)
RW
0h
POR - DAFG - ULR
Reserved.
Value
7:0
Contrl register value of module
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
205
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29.1.1.
SPKVOL L/R Registers
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
Bit
verb F71/771 (Left)
verb F72/772 (Right)
7:0
verb 773 (Left and Right write only)
Label
VOL[7:0]
7.29.1.2.
Type
RW
Default
Description
+36 to -91.5dB in 0.75dB steps
0x00 = +36dB
0x01 = +35.25dB
...
0x2F = +0.75dB
0x30 = 0dB
0x31 = -0.75dB
...
0xA9 = -90.75
0xAA to 0xFE = -91.5dB
0xFF = mute
30
PWRM Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F79/779
Bit
Label
Type
Default
Description
7
RSVD
RO
0
Reserved
6
RSVD
RO
0
Reserved
5
RSVD
RO
0
Reserved
4
HPPWD
RW
0
Headphone ports are forced off in Aux Audio Mode (including
charge pump)
3
SPKRON
RW
0
BTL (port D) is forced on in Aux Audio Mode
2
DMICPWD
RW
0
DMIC powered down in Aux Audio Mode (including DAC)
1
RSVD
RW
0
Reserved
0
RSVD
RW
0
Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
206
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29.1.3.
Register Address
verb F7F/77F
RESET Register
Bit
7:0
Label
RESET
7.29.1.4.
Type Default
RW
Description
Writing causes registers to revert to their default values (similar
to a function group reset)
0
STATUS Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions
Register Address
verb F80/780
Bit
Label
Type Default
Description
7
limit1latch
RO
0
Latched version of limit1, clear via GAINCTRL_LO[7]
6
limit0latch
RO
0
Latched version of limit0, clear via GAINCTRL_LO[7]
5:3
Reserved
RO
0x0
RESERVED
2
limit1
RO
0
Set (1) if regz saturation after gain multiply for CH1. may
change on a sample by sample basis.
1
limit0
RO
0
Set (1) if regz saturation after gain multiply for CH0. may
change on a sample by sample basis.
0
zerodet_flag
RO
0
Set when input zero detect of long string of zeroes.
7.29.1.5.
INIT Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions
Register Address
verb F81/781
Bit
Label
Type
Default
Description
7:4
Reserved
RO
0
RESERVED
3
anabeep_dcbyp
RW
0
1 = bypass analog Beep DC filter
2:1
anabeep_dc_coef
RW
f
0x2
0: dc_coef = 24’h004000;
1: dc_coef = 24’h001000;
2: dc_coef = 24’h000400;
3: dc_coef = 24’h000100;
0
Initialize
0
1= Initialize/soft reset data path. Must be set when changing
the config0 or config1 registers.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
RW
207
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29.1.6.
CONFIG Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F82/782
Bit
Label
Type Default
Description
7
BPFBYP
RW
0
1= Bypass MonoOut band-pass filer
6
PREBYP
RW
1
1= Bypass BTL EQ filter prescale
5
EQBYP
RW
1
1= Bypass BTL EQ filter
4
BTL_dcbyp
RW
0
1 = bypass BTL DC filter
3:1
Reserved
RO
0
RESERVED
0
HPFBYP
RW
0
1= Bypass BTL high-pass filter (not DC removal filter)
7.29.1.7.
PWM4 Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F83/783
Bit
Label
Type Default
Description
7
sc_status_clear_right
RWC 0
Write once operation will clear sc_fault_status_right
6
sc_status_clear_left
RWC 0
Write once operation will clear sc_fault_status_left
5
Reserved
RO
0
RESERVED
4
sc_Fault_status_right RO
0
1 = Fault occurs on right channel
3
sc_Fault_status_left
RO
0
1 = Fault occurs on left channel
2:1
scdly_set
RW
00
Used for short circuit detection; designer will set the value
0
evenbit
RW
0
1=Noise Shaper output data are even
7.29.1.8.
PWM3 Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F84/784
Bit
Label
Type Default
Description
7:6
outctrl
RW
0
pwm output muxing
0 = normal
1 = swap 0/1
2 = ch0 on both
3 = ch1 on both
5:0
cvalue
RW
0x2
Tristate constant value filed, must be even and not 0
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
208
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29.1.9.
PWM2 Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F85/785
Bit
Label
Type
Default
Description
7:2
dvalue
RW
0x10
dvalue constant field.
1
pwm_outflip
RW
0
1= swap pwm a/b output pair for all channels
0
pwm_outmode
RW
1
1= tristate, 0 = binary
7.29.1.10. PWM1Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
Bit
7
verb F86/786
Label
Reserved
Type Default
RO
Description
0
RESERVED
6:2
dithpos
RW
0
Dither position, where dither inserted after NS
0,1,2 = dither bits 2:0
4 = dither bits 3:1
5 = dither bits 4:1
...
19 = dither bits 19:17
1
dither_range
RW
0
1= dither -1 to +1, 0 = dither -3 to +3
0
dithclr
RW
0
1 = disable dither
7.29.1.11. PWM0 Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F87/787
Bit
Label
Type Default
Description
7:6
PhaseOffset
RW
01
PWM ch1 offset from ch0 at 8x sample rate by:
00 = 0 degrees
01 = 90 degrees
10 = 180 degrees
11 = NA
5
clk320mode
R
1
1 = PCA clock 320 mode
0 = PCA clock 294 mode
4
roundup
RW
1
1= roundup, 0 = truncate for quantizer
3
bfclr
RW
0
1 = disable binomial filter
2
fourthorder
RW
0
1 = fourth order binomial filter, 0 = 3rd order binomial filter
1
add3_sel
RW
0
1 = 24-bit Noise Shaper output (pre-quantizer), 0 = 8/9/10-bit
quantizer output
0
Btl_test_mode
RW
0
1 = power stage test mode
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
209
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29.1.12. LMTCTRL Register
Control operation of the volume Limiter (Compressor).
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F88/788
Bit
Label
Type
Default
Description
7:4
–
RO
0
Reserved for future use.
3
zerocross
RW
0
1 = only change limiter gain value on zero cross.
2:1
stepsize
RW
0
Gain stepsize when incrementing or decrementing:
0 - 0.75 dB, 1 - 1.5 dB, 2 - 3.0 dB, 3 - 6.0 dB
0
limiter_en
RW
0
1 = enable limiter (compressor)
7.29.1.13. LMTATKTIME (0x19), LMTHOLDTIME (0x1A), LMTRELTIME (0x1B) Registers
These 8-bit registers set the timer values between incrementing/decrementing the Compressor attenuation values. There is
one register each for Attack, Hold, and Release times, the configuration parameters are the same for all three and are
shown in the table below.
Prior to WC revision, these registers reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb
77F will cause reset on all silicon revisions..
Register Address
verb F89/789
Bit
Description
ATK10ms
RW
0
1 = value in bits 6:0 is in 10ms units, otherwise 1ms units.
6:0
LMTAT[6:0]
RW
0
Timer value in units of 1 or 10ms.
Type
Default
Bit
Label
Description
7
HOLD10ms
RW
0
1 = value in bits 6:0 is in 10ms units, otherwise 1ms units.
6:0
LMTHT[6:0]
RW
0
Timer value in units of 1 or 10ms.
Type
Default
Register Address
verb F8B/78B
Type Default
7
Register Address
verb F8A/78A
Label
Bit
Label
Description
7
REL10ms
RW
0
1 = value in bits 6:0 is in 10ms units, otherwise 1ms units.
6:0
LMTRT[6:0]
RW
0
Timer value in units of 1 or 10ms.
7.29.1.14. LMTATKTH (0x1D–LO, 0x1C–HI), LMTRELTH (0x1F–LO, 0x1E–HI) Registers
These 16-bit registers set the threshold values. When in attack phase and the Attack Threshold is exceeded the
Compressor attenuation is incremented by stepsize (see LMTCTRL). When in release phase and the Release Threshold is
not exceeded the Compressor attenuation is incremented by stepsize (but not above 0)
Prior to WC revision, these registers reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb
77F will cause reset on all silicon revisions..
Register Address
verb F8C/78C
Bit
7:0
Label
LATKTH[15:8]
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Type Default
RW
Description
8’hFF would equal threshold level of +2.0dB. Each step below
this 8-bit full scale value reduces threshold level by 0.0078 dB.
7F
210
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Register Address
verb F8D/78D
Bit
7:0
Register Address
verb F8E/78E
Bit
7:0
Register Address
verb F8F/78F
Bit
7:0
Label
LATKTH[7:0]
Label
LRELTH[15:8]
Label
LRELTH[7:0]
Type Default
Description
Always 0. It isn’t necessary to provide threshold resolution to
the point where these lower 8 bits would be used.
RW
FF
Type
Default
RW
0
Type
Default
RW
0
Description
8’hFF would equal threshold level of +2.0dB. Each step below
this 8-bit full scale value reduces threshold level by 0.0078 dB.
Description
Always 0. It isn’t necessary to provide threshold resolution to
the point where these lower 8 bits would be used.
7.29.1.15. GAINCTRL_HI Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
Bit
7:5
verb F90/790
Label
Reserved
Type Default
RO
Description
0
RESERVED
4:3
zerodetlen
RW
0x2
enable mute if input consecutive zeros exceeds this length:
00 = 32
01 = 1000
10 = 2000
11 = 4000
2:0
step_time
RW
0x5
step time units = 1<<step_time, units in GAINCTRL_LO bit 5
7.29.1.16. GAINCTRL_LO Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F91/791
Bit
Label
Type
Default
Description
7
clr_latch
RW
0
1 = clear limit 0/1 latches, see STATUS register
6
RSVD
RO
0
Reserved
5
step_10ms
RW
0
1 = units for step_time are 10ms
0 = units for step_time are 1ms
4
stepped_change
RW
0
1 = step volume progressively to new setting
3
disable_gain
RW
0
1 = disable all gain functions (bypass gain multiply)
2
auto_mute
RW
1
1 = auto mute if detect long strings of zeros on input
1
change_mode
RW
0
1 = change gain immediately
0 = change on zero cross
0
mute_mode
RW
1
1 = hard mute after reset, 0 = soft mute
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
211
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29.1.17. MUTE Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F92/792
Bit
Label
Type
Default
Description
7:3
Reserved
RO
0x0
RESERVED
2
Mute
RW
0
1 = mute all channels
1
mute1
RW
0
1 = mute ch1
0
mute0
RW
0
1 = mute ch0
7.29.1.18. ATTEN Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
verb F93/793
Bit
7:0
Label
atten
Type
RW
Default
Description
Attenuation. Each bit represents 0.5dB of attenuation to be
applied to the channel. The range will be -125dB to 2dB as
follows:
0x00: +2dB
0x01: +1.5dB
0x02: +1.0dB
...
0x47: -33.5dB
0x48: -34.0dB
0x49: -34.5dB
...
0xFE: -125dB
0xFF: Hard Master Mute
0x0
7.29.1.19. DC_COEF_SEL Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
Bit
7:3
verb F94/794
2:0
Label
Reserved
dc_coef_sel
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Type
Default
RO
0
RESERVED
0x5
0:dc_coef = 24’h100000;
//2^^-3 = 0.125
1:dc_coef = 24’h040000;
2:dc_coef = 24’h010000;
3:dc_coef = 24’h004000;
4:dc_coef = 24’h001000;
5:dc_coef = 24’h000400;
6:dc_coef = 24’h000100;
//2^^-15 = 0.000330517
7:dc_coef = 24’h000040;
//2^^-17
RW
212
Description
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29.1.20. BTL High-Pass Filter COEF_SEL Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause reset on all silicon revisions.
Register Address
Bit
7:3
verb F95/795
2:0
Label
Reserved
hp_coef_sel
Type
Default
RO
0
RESERVED
0x2
Select IIR coefficients for BTL amplifier high pass filter corner
frequency
000 = 100Hz
001 = 200Hz
010 = 300Hz
011 = 400Hz
100 = 500Hz
101 = 750Hz
110 = 1000Hz
111 = 2000Hz
RW
Description
7.29.1.21. BTL Class-D Power Stage Register Settings
Prior to WC revision, these registers reset by POR/DAFG/ULR. WC revision, reset by POR only.
Writing to NID22h verb 77F will cause NOT generate a reset.
Register Address
Bit
Label
Type
Default
Description
7
ENABLE
RW
1
1 = Enable BTL Power stage
6
TRC_ESD
RO
0
1 = ESD trigger detected
0 = No trigger
5
STRENDRV
RW
0
1 = Strengthen pre-drive
0 = Normal
01
Short circuit threshold current
00 = 10% of PVDD
01 = 14% of PVDD
10 = 16% of PVDD
11 = 20% of PVDD
001
Dead time for output FETs
000 = 0.5ns
001 = 1.0ns
010 = 1.5ns
011 = 2ns
100 = 4ns
101 = 8ns
110 = 8ns
111 = 8ns
4:3
SCTHR
RW
verb F97/797
2:0
DEADTIME
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
RW
213
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Register Address
verb F98/798
Bit
Label
Type
Default
7
TEST_EN
RW
0
1 = Enable short circuit test
6
SC_DIS
RW
0
1 = disable short circuit protection
5
RSVD
RW
0
Reserved
4
FAULT_SC
RO
0
1 = Fault
3
RSVD
RW
0
Reserved
2
PNSEL
RW
0
1=PFET tested, 0=NFET tested
1
FORCE_SC
RW
0
1 = force short circuit
0
TEST
RW
0
1 = Pos PFET / Neg NFET on, 0 = Pos NFET / Neg PFET on
Type
Default
Register Address
Bit
Label
Description
7
ENABLE
RW
1
1 = Enable BTL Power stage
6
TRC_ESD
RO
0
1 = ESD trigger detected
0 = No trigger
5
STRENDRV
RW
0
1 = Strengthen pre-drive
0 = Normal
01
Short circuit threshold current
00 = 10% of PVDD
01 = 14% of PVDD
10 = 16% of PVDD
11 = 20% of PVDD
RW
001
Dead time for output FETs
000 = 0.5ns
001 = 1.0ns
010 = 1.5ns
011 = 2ns
100 = 4ns
101 = 8ns
110 = 8ns
111 = 8ns
Type
Default
4:3
SCTHR
RW
verb F99/799
2:0
Register Address
verb F9A/79A
Description
DEADTIME
Bit
Label
Description
7
TEST_EN
RW
0
1 = Enable short circuit test
6
SC_DIS
RW
0
1 = disable short circuit protection
5
RSVD
RW
0
Reserved
4
FAULT_SC
RO
0
1 = Fault
3
RSVD
RW
0
Reserved
2
PNSEL
RW
0
1=PFET tested, 0=NFET tested
1
FORCE_SC
RW
0
1 = force short circuit
0
TEST
RW
0
1 = Pos PFET / Neg NFET on, 0 = Pos NFET / Neg PFET on
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
214
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29.1.22. LDO LEVEL CONTROL Register
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will cause NOT generate a reset.
Register Address
Bit
Label
Type
Default
7:3
Reserved
RO
0x0
2
Lv_QUAD_BIAS
RW
0
RESERVED
Two bits are defined to program the output of the 1.8V LDO
00 = normal operation (3.3V in to 1.8V out)
01 = 1.8V*1.1 = 1.98V
10 = 1.8V*0.9 = 1.62V
11 = power down LDO/bypass. When disabled, the
DVDD_Core pin must be supplied with a nominal 1.8V from
an external source.
verb F9B/79B
1:0
Lv_reg_cntrl_bit
RW
Description
0x0
7.29.1.23. EQRAM
The EQ RAM is a 52 x 48-bit SRAM that contains the EQ coefficients.
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only OR
when a BIST is run under certain conditions, contact IDT for more information. Writing to NID22h
verb 77F will cause NOT generate a reset.
.
Address
Channel RIGHT Coefficients (24bit)
Channel LEFT Coefficients (24bit)
EQRAM
Bits
[47:24]
[23:00]
based on 44.1Khz sample rate
0x00
EQ_COEF_F0_B0
EQ_COEF_F0_B0
0x01
EQ_COEF_F0_B1
EQ_COEF_F0_B1
0x02
EQ_COEF_F0_B2
EQ_COEF_F0_B2
0x03
EQ_COEF_F0_A1
EQ_COEF_F0_A1
0x04
EQ_COEF_F0_A2
EQ_COEF_F0_A2
0x05
EQ_COEF_F1_B0
EQ_COEF_F1_B0
0x06
EQ_COEF_F1_B1
EQ_COEF_F1_B1
0x07
EQ_COEF_F1_B2
EQ_COEF_F1_B2
0x08
EQ_COEF_F1_A1
EQ_COEF_F1_A1
0x09
EQ_COEF_F1_A2
EQ_COEF_F1_A2
0x0A
EQ_COEF_F2_B0
EQ_COEF_F2_B0
0x0B
EQ_COEF_F2_B1
EQ_COEF_F2_B1
0x0C
EQ_COEF_F2_B2
EQ_COEF_F2_B2
0x0D
EQ_COEF_F2_A1
EQ_COEF_F2_A1
0x0E
EQ_COEF_F2_A2
EQ_COEF_F2_A2
0x0F
EQ_COEF_F3_B0
EQ_COEF_F3_B0
0x10
EQ_COEF_F3_B1
EQ_COEF_F3_B1
0x11
EQ_COEF_F3_B2
EQ_COEF_F3_B2
0x12
EQ_COEF_F3_A1
EQ_COEF_F3_A1
0x13
EQ_COEF_F3_A2
EQ_COEF_F3_A2
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
215
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Address
Channel RIGHT Coefficients (24bit)
Channel LEFT Coefficients (24bit)
EQRAM
Bits
[47:24]
[23:00]
0x14
EQ_COEF_F4_B0
EQ_COEF_F4_B0
0x15
EQ_COEF_F4_B1
EQ_COEF_F4_B1
0x16
EQ_COEF_F4_B2
EQ_COEF_F4_B2
0x17
EQ_COEF_F4_A1
EQ_COEF_F4_A1
0x18
EQ_COEF_F4_A2
EQ_COEF_F4_A2
0x19
EQ_PRESCALE
EQ_PRESCALE
based on 48Khz sample rate
0x1A
EQ_COEF_F0_B0
EQ_COEF_F0_B0
0x1B
EQ_COEF_F0_B1
EQ_COEF_F0_B1
0x1C
EQ_COEF_F0_B2
EQ_COEF_F0_B2
0x1D
EQ_COEF_F0_A1
EQ_COEF_F0_A1
0x1E
EQ_COEF_F0_A2
EQ_COEF_F0_A2
0x1F
EQ_COEF_F1_B0
EQ_COEF_F1_B0
0x20
EQ_COEF_F1_B1
EQ_COEF_F1_B1
0x21
EQ_COEF_F1_B2
EQ_COEF_F1_B2
0x22
EQ_COEF_F1_A1
EQ_COEF_F1_A1
0x23
EQ_COEF_F1_A2
EQ_COEF_F1_A2
0x24
EQ_COEF_F2_B0
EQ_COEF_F2_B0
0x25
EQ_COEF_F2_B1
EQ_COEF_F2_B1
0x26
EQ_COEF_F2_B2
EQ_COEF_F2_B2
0x27
EQ_COEF_F2_A1
EQ_COEF_F2_A1
0x28
EQ_COEF_F2_A2
EQ_COEF_F2_A2
0x29
EQ_COEF_F3_B0
EQ_COEF_F3_B0
0x2A
EQ_COEF_F3_B1
EQ_COEF_F3_B1
0x2B
EQ_COEF_F3_B2
EQ_COEF_F3_B2
0x2C
EQ_COEF_F3_A1
EQ_COEF_F3_A1
0x2D
EQ_COEF_F3_A2
EQ_COEF_F3_A2
0x2E
EQ_COEF_F4_B0
EQ_COEF_F4_B0
0x2F
EQ_COEF_F4_B1
EQ_COEF_F4_B1
0x30
EQ_COEF_F4_B2
EQ_COEF_F4_B2
0x31
EQ_COEF_F4_A1
EQ_COEF_F4_A1
0x32
EQ_COEF_F4_A2
EQ_COEF_F4_A2
0x33
EQ_PRESCALE
EQ_PRESCALE
The EQRAM is programmed indirectly through the Control Bus in the following manner:
1) Write the 48-bit write data to the EQRAM_WRITE register
2) Write the target address to the EQ_ADDRESS register
3) Set bit 7 of the EQRAM_CTRL register
The write will occur when the EQRAM is not being accessed by the DSP audio processing routines. When complete
the hardware will automatically clear this bit.
Reading back from the EQRAM is done in the following manner:
1) Write target address to EQ_ADDR register
2) Set bit 6 of the EQRAM_CTRL register
When the hardware completes the read it will automatically clear this bit.
3) When bit 6 of the EQRAM_CTRL register has been cleared, read the 48bit data from the EQRAM_READ register.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
216
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
7.29.1.24. EQRAM Read Data (0x30–0x35), EQRAM Write Data (0x36–3B) Registers
These two 48-bit registers (addressed as 12 8-bit registers) are 48-bit data holding registers used
when doing indirect writes/reads to the EQRAM.
Prior to WC revision, these registers reset by POR/DAFG/ULR. WC revision, reset by POR only
Writing to NID22h verb 77F will cause NOT generate a reset to EQRAMREAD registers, it will however work for EQRAMWRITE registers.]]
Register Address
EQRAM_READ[47:40]
verb FA0/7A0
Register Address
EQRAM_READ[39:32]
verb FA1/7A1
Register Address
EQRAM_READ[31:24]
verb FA2/7A2
Register Address
EQRAM_READ[23:16]
verb FA3/7A3
Register Address
EQRAM_READ[15:8]
verb FA4/7A4
Register Address
EQRAM_READ[7:0]
verb FA5/7A5
Register Address
EQRAM_WRITE[47:40]
verb FA6/7A6
Register Address
EQRAM_WRITE[39:32]
verb FA7/7A7
Bit
7:0
Bit
7:0
Bit
7:0
Bit
7:0
Bit
7:0
Bit
7:0
Bit
7:0
Bit
7:0
Label
EQRD[47:40]
Label
EQRD[39:32]
Label
EQRD[31:24]
Label
EQRD[23:16]
Label
EQRD[15:8]
Label
EQRD[7:0]
Label
EQWD[47:40]
Label
EQWD[39:32]
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
Type Default
RW
48-bit data register, contains the contents of the most recent
EQRAM address read from the RAM. The address read will
have been specified by the EQRAM Address fields.
0x00
Type Default
RW
Description
48-bit data register, contains the contents of the most recent
EQRAM address read from the RAM. The address read will
have been specified by the EQRAM Address fields.
0x00
Type Default
Description
48-bit data register, contains the contents of the most recent
EQRAM address read from the RAM. The address read will
have been specified by the EQRAM Address fields.
RW
0x00
Type
Default
RW
0x00
Type
Default
RW
0x00
Description
48-bit data register, contains the contents of the most recent
EQRAM address read from the RAM. The address read will
have been specified by the EQRAM Address fields.
Description
48-bit data register, contains the values to be written to the
EQRAM. The address written will have be specified by the
EQRAM Address fields.
Type Default
RW
Description
48-bit data register, contains the contents of the most recent
EQRAM address read from the RAM. The address read will
have been specified by the EQRAM Address fields.
0x00
Type Default
RW
Description
48-bit data register, contains the contents of the most recent
EQRAM address read from the RAM. The address read will
have been specified by the EQRAM Address fields.
0x00
Type Default
RW
Description
Description
48-bit data register, contains the values to be written to the
EQRAM. The address written will have be specified by the
EQRAM Address fields.
0x00
217
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Register Address
EQRAM_WRITE[31:24]
verb FA8/7A8
Bit
7:0
Register Address
EQRAM_WRITE[23:16]
verb FA9/7A9
7:0
Bit
7:0
Register Address
EQRAM_WRITE[7:0]
verb FAB/7AB
EQWD[31:24]
Bit
Register Address
EQRAM_WRITE[15:8]
verb FAA/7AA
Label
Bit
7:0
Label
EQWD[23:16]
Label
EQWD[15:8]
Label
EQWD[7:0]
Type
RW
Type
Default
Description
48-bit data register, contains the values to be written to the
EQRAM. The address written will have be specified by the
EQRAM Address fields.
0x00
Default
Description
48-bit data register, contains the values to be written to the
EQRAM. The address written will have be specified by the
EQRAM Address fields.
RW
0x00
Type
Default
RW
0x00
Description
48-bit data register, contains the values to be written to the
EQRAM. The address written will have be specified by the
EQRAM Address fields.
Type Default
RW
Description
48-bit data register, contains the values to be written to the
EQRAM. The address written will have be specified by the
EQRAM Address fields.
0x00
7.29.1.25. EQRAM Address Register
This 8-bit register provides the address to the internal RAM when doing indirect writes/reads to the
EQRAM.
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will generate a reset for all revisions.
Register Address
Bit
7:6
verb FAC/7AC
5:0
Label
RSVD
EQADD[5:0]
Type
Default
RO
0x00
Reserved
0x00
Contains the address (between 0x00 and 0x33) of the
EQRAM to be accessed by a read or write. This is not a byte
address--it is the address of the 48-bit data item to be
accessed from the EQRAM.
RW
Description
7.29.1.26. EQRAM Control Register
This control register provides the write/read enable when doing indirect writes/reads to the EQRAM
Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing
to NID22h verb 77F will generate a reset for all revisions.
Register Address
verb FAD/7AD
Bit
Label
Type Default
Description
7
EQRAM_wr
RW
0
1 = write to EQRAM, cleared by HW when done
6
EQRAM_rd
RW
0
1 = read from EQRAM, cleared by HW when done
5:0
RSVD
RO
0
Reserved
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
218
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
40
39
38
37
36
35
34
33
32
31
EAPD
PVDD
PORTD_+R
PORTD_-R
PVSS
PORTD_-L
PORTD_+L
PVDD
AVDD2
Vreg(+2.5V)
8. PINOUT AND PACKAGING
1
2
3
4
5
6
7
8
9
10
40-QFN
30
29
28
27
26
25
24
23
22
21
Cap+
CapVAVSS2
PORTB_R
PORTB_L
AVSS2
PORTA_R
PORTA_L
AVDD1
SENSE_A
SENSE_B
PORTF_L
PORTF_R
PORTC_L
PORTC_R
VrefFilt
CAP2
VrefOut_A
VrefOut_C/GPIO4
11
12
13
14
15
16
17
18
19
20
DVDD_LV
DMIC_CLK/GPIO 1
DMIC_0/GPIO 2
SDATA_OUT
BITCLK
SDATA_IN
DVDD*
SYNC
RESET#
PCBeep
Figure 18. 40QFN Pin Assignment
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
219
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
8.0.1.
40QFN Pin Table
Pin Name
Pin Function
I/O
Internal
Pull-up/Pull-down
40 pin
location
DVDD_CORE
1.8V Digital Core Regulator Filter Cap
O(Digital)
None
1
DMIC_CLK/GPIO1
Digital Mic Clock Output/GPIO1
I/O(Digital)
60K Pull-down
2
DMIC0/GPIO2
Digital Mic 01 Input/GPIO2
I/O(Digital)
60K Pull-down
3
SDATA_OUT
HD Audio Serial Data output from controller
I/O(Digital)
None
4
BITCLK
HD Audio Bit Clock
I(Digital)
None
5
SDATA_IN
HD Audio Serial Data Input to controller
O(Digital)
None
6
DVDD
Digital Vdd= 3.3V
I(Digital)
None
7
SYNC
HD Audio Frame Sync
I(Digital)
None
8
RESET#
HD Audio Reset
I(Digital)
None
9
PCBEEP
PC Beep
I(Analog)
None
10
SENSE_A
Jack insertion detection Ports A,B,C,
I(Analog)
None
11
SENSE_B
Jack insertion detection Port F, DMIC0
I(Analog)
None
12
PORTF_L
Port F Left
I/O(Analog)
None
13
PORTF_R
Port F Right
I/O(Analog)
None
14
PORTC_L
Port C Left
I/O(Analog)
None
15
PORTC_R
Port C Right
I/O(Analog)
None
16
VREFFILT
Analog Virtual Ground
O(Analog)
None
17
CAP2
Reference filter Cap
O(Analog)
None
18
VREFOUT-A
Reference Voltage out drive (intended for mic bias) O(Analog)
None
19
VREFOUT-C/GPIO4
Reference Voltage out drive (intended for mic bias)
I/O(Analog)
or general purpose I/O
None
20
AVDD1
Analog Vdd=5.0V or 3.3V
I(Analog)
None
21
PORTA_L (HP0)
Port A Output Left
I/O(Analog)
None
22
PORTA_R (HP0)
Port A Output Right
I/O(Analog)
None
23
AVSS
Analog Ground
I(Analog)
None
24
PORTB_L (HP1)
Port B Output Left
I/O(Analog)
None
25
PORTB_R (HP1)
Port B Output Right
I/O(Analog)
None
26
AVSS
Analog Ground
I(Analog)
None
27
V-
Negative analog supply
O(Analog)
None
28
CAP-
Charge pump cap -
O(Analog)
None
29
CAP+
Charge pump cap +
O(Analog)
None
30
VREG
Linear Regulator Output (2.5V) filter cap
O(Analog)
None
31
AVDD2
Analog Supply for VREG
I(Analog)
None
32
PVDD
Analog Supply for Class-D amp
I(Analog)
None
33
PORTD_+L
BTL amp Left +
O(Analog)
None
34
PORTD_-L
BTL amp Left -
O(Analog)
None
35
PVSS
Analog Ground
I(Analog)
None
36
Table 29. 40QFN Pin Description
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
220
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
Pin Name
Pin Function
Internal
Pull-up/Pull-down
I/O
40 pin
location
PORTD_-R
BTL amp Right -
O(Analog)
None
37
PORTD_+R
BTL amp Right +
O(Analog)
None
38
PVDD
Analog Supply for Class-D amp
I(Analog)
None
39
EAPD
EAPD
I/O (Digital)
60K Pull-up
40
Table 29. 40QFN Pin Description
8.0.2.
40QFN Package Outline and Package Dimensions
Package dimensions are kept current with JEDEC Publication No. 95
Figure 19. 40QFN Package Diagram
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
221
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
8.1.
Standard Reflow Profile Data
Note: These devices can be hand soldered at 360 oC for 3 to 5 seconds.
FROM: IPC / JEDEC J-STD-020C “Moisture/Reflow Sensitivity Classification for Nonhermetic Solid
State Surface Mount Devices” (www.jedec.org/download).
Profile Feature
Pb Free Assembly
Average Ramp-Up Rate (Tsmax - Tp)
o
3 C / second max
Preheat:
Temperature Min (Tsmin)
Temperature Max (Tsmax)
Time (tsmin - tsmax)
150 oC
200 oC
60 - 180 seconds
Time maintained above:
Temperature (TL)
Time (tL)
217 oC
60 - 150 seconds
Peak / Classification Temperature (Tp)
Time within 5
oC
of actual Peak Temperature (tp)
Ramp-Down rate
Time 25 oC to Peak Temperature
See “Package Classification Reflow Temperatures”
20 - 40 seconds
6 oC / second max
8 minutes max
Note: All temperatures refer to topside of the package, measured on the package body surface.
Table 30. Standard Reflow Profile
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
222
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
9. DISCLAIMER
While the information presented herein has been checked for both accuracy and reliability, manufacturer assumes no responsibility for either its use or for the infringement of any patents or other rights
of third parties, which would result from its use. No other circuits, patents, or licenses are implied.
This product is intended for use in normal commercial applications. Any other applications, such as
those requiring extended temperature range, high reliability, or other extraordinary environmental
requirements, are not recommended without additional processing by manufacturer. Manufacturer
reserves the right to change any circuitry or specifications without notice. Manufacturer does not
authorize or warrant any product for use in life support devices or critical medical instruments.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
223
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
10. DOCUMENT REVISION HISTORY
Revision
Date
Description of Change
0.8
April 2010
initial release
0.85
May 2010
updated 40QFN package drawing for different DAP size.
0.86
June 2010
Aux mode section added, corrected package code in orderable part numbers
September 2010
Added changes for YA silicon revision (ZA/ZB prior settings referenced)
AFG EAPD bit added for PortE Headphone control. AFG ComJack bits added to select debounce
time. Removed SCS support. Updated 40QFN package diagram. Updated conditions of
performance characteristics, added HDA signaling voltage to condition for power measurements.
Default changed on BTL/HD_Mode from 0 to 1.Corrected Combo Jack diagram.Added Pin
Configuration Default Settings.
0.91
October 2010
Updated LDO Level Control values. Corrected step size and thermal trip in BTL section. Updated
SPKVOL L/R step size to .75dB. Added additional verb for updating speaker L and R volume at the
same time (to match HDA implementation). Widget 22h verbs added/reordered. Added description
text for High pass filter feature.
0.92
May 2011
Corrected Sense A/B description and table.
0.93
June 2011
Corrected front page bullet for BTL voltage and corrected table 1 pin numbers for BTL.
0.9
1.0
October 2011
Corrected Left vs Right channel for the EQ coefficients to match silicon. Updated electrical
characteristics for typical values. Removed Preliminary. Removed comments related to ZA and ZB
silicon since they were non-production. Added WB silicon widget items: ComboJackTiming in the
AFG and ScStableTimeSel added to AFG AnaBTL. Added PVDD value for the digital maximum
supply voltage and footnote to the GPIO characteristics for the Input Low and High Voltage.
1.1
November 2011
Added feature bullet and description section for microphone input mute which is available only on
silicon revisions WB and beyond.
1.2
January 2012
Corrections for 022FB0 / 0227B0 to 022FB6 / 0227B6 as they are not reachable via NID22 but must
be accessed through the Port Nodes.UpdatedNID22 registers with reset information, which is
different for WC silicon revision.
IDT CONFIDENTIAL
©2009 INTEGRATED DEVICE TECHNOLOGY, INC.
224
V1.2 1/12
92HD99
92HD99
SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO
6024 Silver Creek Valley Road
San Jose, California 95138
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined
in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained
herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s
products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This
document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be
reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own
risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.