FAIRCHILD TL431ACLP

www.fairchildsemi.com
TL431/TL431A
Programmable Shunt Regulator
Features
Description
•
•
•
•
The TL431/TL431A are three-terminal adjustable regulator
series with a guaranteed thermal stability over applicable
temperature ranges. The output voltage may be set to any
value between VREF (approximately 2.5 volts) and 36 volts
with two external resistors These devices have a typical
dynamic output impedance of 0.2Ω. Active output circuitry
provides a very sharp turn-on characteristic, making these
devices excel lent replacement for zener diodes in many
applications.
Programmable Output Voltage to 36 Volts
Low Dynamic Output Impedance 0.2Ω Typical
Sink Current Capability of 1.0 to 100mA
Equivalent Full-Range Temperature Coefficient of
50ppm/°C Typical
• Temperature Compensated For Operation Over Full Rated
Operating Temperature Range
• Low Output Noise Voltage
• Fast Turn-on Response
TO-92
1
1. Ref 2. Anode 3. Cathode
8-DIP
1
1.Cathode 2.3.4.5.7.NC
6.Anode 8.Ref
8-SOP
1
1. Cathode 2. 3. 6. 7. Anode
8. Ref 4. 5. NC
Rev. 1.0.4
©2011 Fairchild Semiconductor Corporation
TL431/TL431A
Internal Block Diagram
+
-
Absolute Maximum Ratings
(Operating temperature range applies unless otherwise specified.)
Parameter
Symbol
Value
Unit
Cathode Voltage
VKA
37
V
Cathode Current Range (Continuous)
IKA
-100 ~ +150
mA
IREF
-0.05 ~ +10
mA
PD
770
1000
mW
mW
TOPR
-25 ~ +85
°C
TJ
150
°C
TSTG
-65 ~ +150
°C
Reference Input Current Range
Power Dissipation
D, LP Suffix Package
P Suffix Package
Operating Temperature Range
Junction Temperature
Storage Temperature Range
Recommended Operating Conditions
Parameter
2
Symbol
Min
Typ
Max
Unit
Cathode Voltage
VKA
VREF
-
36
V
Cathode Current
IKA
1.0
-
100
mA
TL431/TL431A
Electrical Characteristics
(TA = +25°C, unless otherwise specified)
Parameter
Reference Input Voltage
Symbol
Conditions
TL431
Min.
TL431A
Typ.
Max. Min. Typ. Max.
2.440 2.495
2.550 2.470 2.495 2.520
Unit
VREF
VKA=VREF, IKA=10mA
Deviation of Reference
Input Voltage OverTemperature (Note 1)
V
ΔVREF/
ΔT
VKA=VREF, IKA=10mA
TMIN≤TA≤TMAX
-
4.5
17
-
4.5
17
Ratio of Change in
Reference Input Voltage
to the Change in
Cathode Voltage
ΔVREF/
ΔVKA
IKA
=10mA
ΔVKA=10VVREF
-
- 1.0
-2.7
-
-1.0
-2.7
ΔVKA=36V10V
-
-0.5
-2.0
-
-0.5
-2.0
Reference Input Current
IREF
IKA=10mA,
R1=10KΩ,R2=∞
-
1.5
4
-
1.5
4
μA
Deviation of Reference
Input Current Over Full
Temperature Range
ΔIREF/ΔT
IKA=10mA,
R1=10KΩ,R2=∞
TA =Full Range
-
0.4
1.2
-
0.4
1.2
μA
Minimum Cathode Current for Regulation
IKA(MIN)
VKA=VREF
-
0.45
1.0
-
0.45
1.0
mA
Off - Stage Cathode
Current
IKA(OFF)
VKA=36V, VREF=0
-
0.05
1.0
-
0.05
1.0
μA
Dynamic Impedance
(Note 2)
ZKA
VKA=VREF,
IKA=1 to 100mA
f ≥1.0KHz
-
0.15
0.5
-
0.15
0.5
Ω
mV
mV/V
• TMIN= -25 °C, TMAX= +85 °C
3
TL431/TL431A
Test Circuits
TL431/A
Figure 1. Test Circuit for VKA=VREF
TL431/A
Figure 3. Test Circuit for lKA(OFF)
4
TL431/A
Figure 2. Test Circuit for VKA≥VREF
TL431/TL431A
Typical Perfomance Characteristics
Figure 1. Cathode Current vs. Cathode Voltage
Figure 2. Cathode Current vs. Cathode Voltage
Figure 3. Change In Reference Input Voltage vs.
Cathode Voltage
Figure 4. Dynamic Impedance Frequency
Figure 5. Small Signal Voltage Amplification vs. Frequency
Figure 6. Pulse Response
5
TL431/TL431A
Typical Application
R1
V O = V ref ⎛⎝ 1 + -------⎞⎠
R2
R1
V O = ⎛⎝ 1 + -------⎞⎠ V ref
R2
R1
V O = ⎛⎝ 1 + -------⎞⎠ V ref
R2
MC7805/LM7805
TL431/A
TL431/A
TL431/A
Figure 10. Shunt Regulator
Figure 11. Output Control for ThreeTermianl Fixed Regulator
TL431/A
Figure 13. Current Limit or Current Source
6
Figure 12. High Current Shunt Regulator
TL431/A
Figure 14. Constant-Current Sink
TL431/TL431A
Mechanical Dimensions
Package
TO-92
+0.25
4.58 ±0.20
4.58 –0.15
14.47 ±0.40
0.46 ±0.10
1.27TYP
[1.27 ±0.20]
1.27TYP
[1.27 ±0.20]
+0.10
0.38 –0.05
(0.25)
+0.10
0.38 –0.05
1.02 ±0.10
3.86MAX
3.60 ±0.20
(R2.29)
7
TL431/TL431A
Mechanical Dimensions (Continued)
Package
#5
1.524 ±0.10
0.060 ±0.004
#4
0.018 ±0.004
#8
2.54
0.100
9.60
MAX
0.378
#1
9.20 ±0.20
0.362 ±0.008
(
6.40 ±0.20
0.252 ±0.008
0.46 ±0.10
0.79
)
0.031
8-DIP
5.08
MAX
0.200
7.62
0.300
3.40 ±0.20
0.134 ±0.008
+0.10
0.25 –0.05
+0.004
0~15°
8
0.010 –0.002
3.30 ±0.30
0.130 ±0.012
0.33
MIN
0.013
TL431/TL431A
Mechanical Dimensions (Continued)
Package
8-SOP
MIN
#5
6.00 ±0.30
0.236 ±0.012
8°
0~
+0.10
0.15 -0.05
+0.004
0.006 -0.002
MAX0.10
MAX0.004
1.80
MAX
0.071
3.95 ±0.20
0.156 ±0.008
5.72
0.225
0.41 ±0.10
0.016 ±0.004
#4
1.27
0.050
#8
5.13
MAX
0.202
#1
4.92 ±0.20
0.194 ±0.008
(
0.56
)
0.022
1.55 ±0.20
0.061 ±0.008
0.1~0.25
0.004~0.001
0.50 ±0.20
0.020 ±0.008
9
TL431/TL431A
Ordering Information
Product Number
TL431ACLP
TL431ACD
Output Voltage Tolerance
1%
TL431CLP
TL431CP
Package
TO-92
8-SOP
TO-92
2%
TL431CD
Operating Temperature
-25 ~ + 85oC
8-DIP
8-SOP
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
2/22/11 0.0m 001
Stock#DS400301
© 2011 Fairchild Semiconductor Corporation