Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Multi-purpose Medical Filter for Power Line Noise Protection MV Series UL Recognized CSA Certified VDE Approved MV Series Specifications • Multi-purpose medical filter • Improved Line to Ground performance • A good solution to emission or immunity problems • Meets leakage current requirements of UL2601 for health care equipment Maximum leakage current each Line to Ground: @ 120 VAC 60 Hz: .07 mA @250 VAC 50 Hz: .13 mA Hipot rating (one minute): Line to Ground: Line to Line: 2250 VDC 1450 VDC Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: 3 to 20A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 Ordering Information Electrical Schematic 6 MV 1 Input / Output Style 1 – .250 [6.3] spade terminals LINE LOAD MV Series Current Rating 3, 6, 10 or 20A Available Part Numbers 3MV1 10MV1 6MV1 20MV1 54 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Multi-purpose Medical Filter for Power Line Noise Protection (continued) MV Series Case Styles MV1 (3, 6, 10A) Performance Data Typical Insertion Loss Measured in closed 50 Ohm system B C 6MV db 100 db 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 0 20MV1 10 0.1 1 0 10 30 Frequency in MHz 20MV db 100 db 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 E 0.1 10MV 0 1 RFI Power Line Filters D E A 3MV 1 10 30 Frequency in MHz 1 10 30 Frequency in MHz 10 0.1 1 0 10 30 Frequency in MHz 0.1 Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) D B Minimum Insertion Loss Measured in closed 50 Ohm system 2.00 Common Mode / Asymmetrical (Line to Ground) 50.8 A C Case Dimensions Part No. 3MV1 6MV1 10MV1 20MV1 A B C D E Differential Mode / Symmetrical (Line to Line) 55 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com