MA-COM ELCM-1MH

E-Series Surface Mount Mixer — 2 - 500 MHz
ELCM-1MH
ELCM-1MH
E-Series Surface Mount Mixer
2 – 500 MHz
Features
•
•
•
•
SM-89 Package
LO Power +13 dBm
Up to +9 dBm RF
Surface Mount
Low Profile
Note: Non Hermetic Package
Description
M/A-COM’s ELCM-1MH is a Low Cost,Broadband,high
Performance Double Balanced Mixer designed for use in high
volume wireless applications. The device has been optimised by
careful selection of the Schottky Diode and Balun Transformer for
excellent performance. ELCM-1MH is available in an SM-89
surface mount package and reflows using standard soldering
reflow profiles.
Electrical Specifications @ +25°C, Z0 = 50 Ohms, LO = +7dBm
Parameter
Units
Minimum
Typical
Maximum
Frequency Range
RF
2 - 500
LO
2 - 500
IF
DC - 500
MHz
MHz
MHz
—
—
—
—
—
—
—
—
—
dB
dB
—
—
5.5
6.0
7.0
8.0
MHz
MHz
MHz
45
30
25
55
44
30
—
—
—
MHz
MHz
MHz
40
25
25
55
35
29
—
—
—
Conversion Loss
2 - 250
250 - 500
Isolation (LO - RF)
2 - 20
20 - 250
250 - 500
Isolation
(LO - IF)
2 - 20
20 - 250
250 - 500
V1.00
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
S 1456 B
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product
information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
E-Series Surface Mount Mixer — 2 - 500 MHz
ELCM-1MH
Functional Configuration
Absolute Maximum Ratings
Parameter
Absolute Maximum
Function
Pin No.
RF Power
50 mW
LO
1
Peak IF Current
40 mA
RF
4
Storage Temperature
-55°C to +100°C
IF
5
Operating Temperature
-55°C to +100°C
Ground
2, 3, 6
Pin Temperature (10 Seconds)
260°C
Case Ground
—
Unconnected
—
Typical Performance @ +25°C
L-R Isolation
Conversion Loss
0.0
-4.0
-10.0
-5.0
-20.0
dB
dB
-6.0
-30.0
-40.0
-7.0
-50.0
-8.0
-60.0
-70.0
-9.0
10
108
206
304
402
500
1
101
201
300
400
500
Frequency (MHz)
Frequency (MHz)
L-I Isolation
0.0
-10.0
dB
-20.0
-30.0
-40.0
-50.0
-60.0
-70.0
1
101
201
300
400
500
Frequency (MHz)
NOTES:
1. See M/A Com Soldering Reflow Guidelines AN-002.
2. Part constructed using a High Melting Point Solder (95.5Pb/3.5Sn/1.5Ag).
3. Qualified for application and reliability per industry standards including Reflow Simulation, Temperature Cycle, High Temperature life and
Temperature/Humidity.
4. This part has an Average Outgoing Quality Level of 4.5 Sigma.
V1.00
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
S 1456 B
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product
information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make