MAAV-007089-000100 Voltage Variable Absorptive Attenuator, 800 - 1000 MHz Features • • • • • • • • • • • • • • Rev. V2 Functional Schematic Input IP3: +35 dBm Min. (Full Attenuation Range) Input IP3 is 15 -20 dB Better Than GaAs Linear Operation: +20 dBm Typ. 38 dB Dynamic Range (With 30 mA Bias Current) Single Control Voltage 50 ohm Impedance Linear Driver, MADR-007098-000100, Available Test Boards are Available Tape and Reel Packaging Available Lead-Free SOW-16 Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of AT10-0009 Description M/A-COM's MAAV-007089-000100 is a PIN diode based voltage variable attenuator. This device is in a SOW-16, wide body plastic surface mount package. These attenuators have linear operating power and input intercept point levels 15 - 20 dB better than GaAs FET MMIC voltage variable attenuators. They are ideally suited for use where low distortion, high linear operating power and high dynamic range are required. These devices are optimized for the GSM frequency band, but exhibit excellent performance and repeatability over the entire specified frequency band. The MAAV-007089-000100 is ideally suited for wireless communications systems. Pin Configuration Pin No. Function Pin No. Function 1 GND 9 GND 2 RF 10 RF 3 GND 11 GND 4 GND 12 GND 5 GND 13 GND 6 GND 14 GND 7 Bias 1 15 Bias1 8 GND 16 GND Ordering Information Part Number Package MAAV-007089-000100 Bulk Packaging MAAV-007089-0001TR 1000 piece reel MAAV-007089-0001TB Sample Test Board MAAV-007089-DR01TB Unit with Driver on Test Board 1. Bias currents may be applied to pin 7 or 15. The unused pin should be isolated. Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAV-007089-000100 Voltage Variable Absorptive Attenuator, 800 - 1000 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss 0 volts 800-1000 MHz 925 - 960 MHz dB dB — — 3.5 3.3 4.2 3.9 Attenuation (Above Loss) 12 mA bias current 800-1000 MHz 925 - 960 MHz dB dB 30 33 38 — — Attenuation Flatness 0 to 30 dB attenuation 800-1000 MHz 925 - 960 MHz dB dB — — 1.5 0.4 2.5 0.8 VSWR 0 to 30 dB attenuation 800-1000 MHz 925 - 960 MHz Ratio Ratio — — 1.6:1 1.4:1 2.0:1 1.7:1 Switching Speed 50% Control to 90%/10% RF 800-1000 MHz µs — — 10.0 Linear Operation — 800-1000 MHz dBm — +20 — Input IP3 Two-tone inputs up to +10 dBm 800-1000 MHz dBm +35 +40 —- I Control — 800-1000 MHz mA — — 30 Absolute Maximum Ratings 2,3 Parameter Recommended PCB Configuration Absolute Maximum Max. Input Power +27 dBm Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAV-007089-000100 Voltage Variable Absorptive Attenuator, 800 - 1000 MHz Rev. V2 Typical Performance Curves Insertion Loss Attenuation Flatness (dB) @ +25°C + 2 5 °C + 8 5 °C 3 0 dB - 4 0 °C 2 0 dB 10 d B R ef 3 6 2 Flatness (dB) Loss (dB) 5 4 3 1 0 -1 -2 2 1 750 -3 825 900 975 750 1050 825 900 975 1050 Fre que ncy (MHz ) Fre que ncy (MHz ) Attenuation vs. Bias Current Frequency = 1000 MHz Typical VSWR @ +25°C 15 d B 3 0 dB - 4 0 °C R ef 2.5 + 2 5 °C + 8 5 °C 42 Attenuation (dB) VSWR (Ratio) 36 2.0 1.5 30 24 18 12 6 0 1.0 750 825 900 Fre que ncy (MHz) 975 1050 0 1 2 3 4 5 6 7 8 9 10 Bias Current (mA) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAV-007089-000100 Voltage Variable Absorptive Attenuator, 800 - 1000 MHz Rev. V2 Lead-Free, SOW-16† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.