MAAPSS0066 WDCT Power Amplifier 2400 - 2500 MHz Rev. V3 Functional Schematic Features • • • • • • • • • • • Ideal for WDCT Applications Saturated Output Power: +25 dBm Typical Power Gain: 25 dB Typical Low Current: 400 mA at PSAT Micro-Amp Shutdown Operates from 1.5 V to 4.0 V VEN configurable for either 1.7 V or 2.5 V Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible VCC1 N/C VCC2 RF OUT/ VCC3 N/C RF IN RF OUT/ VCC3 Ven1 RF OUT/ VCC3 Description The MAAPSS0066 is a three stage power amplifier designed for Cordless Telephone applications. This power amplifier is packaged in a standard outline, lead-free 3 mm 12-lead PQFN plastic package. The MAAPSS0066 features an integrated bias controller that allows for micro amp shut down current. Ven2, 3 Package MAAPSS0066 Bulk Packaging MAAPSS0066TR-3000 3000 piece reel MAAPSS0066SMB Sample Test Board (Includes 5 Samples) Pin No. Pin Name Description 1 N/C No Connection 2 RFIN RF Input 3 VEN1 Power Enable 4 VEN2,3 Power Enable 5 N/C No Connection 6 N/C No Connection 7 RFOUT / VCC3 RF Output, 3rd Stage Supply 8 RFOUT / VCC3 RF Output, 3rd Stage Supply 9 RFOUT / VCC3 RF Output, 3rd Stage Supply 10 VCC2 2nd Stage Supply 11 N/C No Connection VCC1 1st Stage Supply GND RF & DC Ground 1. Reference Application Note M513 for reel size information. Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power + 5 dBm Operating Supply Voltage +4.0 Volts Operating Control Voltage +3.0 Volts Operating Temperature -20°C to +85°C Channel Temperature +150°C Storage Temperature -40°C to +150°C N/C Pin Configuration Ordering Information1 Part Number N/C 12 Pad 4 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0066 WDCT Power Amplifier 2400 - 2500 MHz Rev. V3 Electrical Specifications: Frequency = 2450 MHz, PIN = -1 to 3 dBm, VCC = 2.4 V, VEN = 2.5 V, TA = 25 °C, Z0 = 50Ω Parameter Test Conditions Units Min. Typ. Max Small Signal Gain Pin = -20 dBm dB — 27 — Input Return Loss — dB — 15 — Output Power — dBm 23 25 — Power Flatness 2.0 V < VCC < 3.0 V dB — 3 — PAE — % — 33 — Current — mA — 400 500 Current, Off VEN = 0 V µA 3 10 Pdiss POUT = 25.0 dBm W — 0.6 — Control Pins VEN, Low VEN, High Current V V mA 0 2.0 — — — 3 0.5 2.5 4.0 Harmonics 2f 3f dBc dBc — — -54 -42 — — Forward Isolation VEN = 0 V dB — 39 — Duty Cycle — % — — 100 Stability +1.5 V < VCC < +3.5 V, PIN = -1 to 3 dBm, VSWR < 6:1 -20°C < TC < +70ºC, RBW = 3 MHz max hold All spurs < -60 dBc Lead-Free 3 mm 12-Lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Operating the MAAPSS0066 The MAAPSS0066 can be damaged by electrostatic discharge (ESD). Use proper ESD control techniques when handling this device. To operate the MAAPSS0066, turn on VCC before VEN for power on and turn off VCC after VEN for shutdown. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0066 WDCT Power Amplifier 2400 - 2500 MHz Rev. V3 Evaluation Board Schematic VCC (Typ. = 2.4 V) C7 C8 C5 C6 C10 C9 T2 T3 L1 C11 T4 T1 C4 RF IN C1 C3 RF OUT R1 Ven (Typ. = 2.5 V) C2 MAAPSS0066 External Parts List Designator Value Footprint Manufacturer Part ID C1, C3 2 pF 0402 Murata GRM1555C1H2R0CZ01 C2 1 nF 0402 Murata GRM1555R71H102KA01 C4, C5, C6 47 pF 0402 Murata GRM1555C1H470JZ01 C7, C8, C9 1 µF 0402 Murata GRM1555R60J105KE19 C10 4700 pF 0402 Murata GRM155R71H472KA01D C11 1 pF 0402 Murata GRM36C0G010C50 L1 10 nH 0402 Coilcraft 0402CS-10NXJB R1 (VEN = 2.5 V) 240 Ohm 0402 KOA RK73B1ET241J R1 (VEN = 1.7 V) 100 Ohm 0402 KOA RK73B1ET101J Transmission Line Dimensions, 0.20 mm thick FR4 Designator Length (mm) * Width (mm) T1 5.20 0.37 T2 1.00 0.37 T3 1.27 0.37 T4 3.20 0.37 * From package edge to center of component Jumper Jumper 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0066 WDCT Power Amplifier 2400 - 2500 MHz Rev. V3 Typical Characteristics (All data uses the supplied sample board BOM) POUT, PAE, ICC vs. PIN @ 2.4 V, 2450 MHz POUT, PAE, ICC vs. VCC @ 2450 MHz, PIN = 1 dBm 1.0 40 1.0 40 PAE PAE 0.8 30 0.8 30 Pout Pout 20 10 0.6 20 0.4 10 0.4 0.2 0 0.2 0.0 -10 0.6 Icc Icc 0 -10 -15 -10 -5 0 5 2 2.3 2.6 2.9 3.2 0.0 3.5 Vcc (V) Pin (dBm) ICC vs. POUT and Temp @ 2.4 V, 2450 MHz POUT vs. PIN and Temp @ 2.4 V, 2450 MHz 27 0.6 26 0.5 25 0.4 24 0.3 -20°C +25°C +50°C +70°C 23 0.2 22 21 20 -20°C +25°C 0.1 +70°C 0.0 -3 -1 1 3 5 10 13 16 30 27 20 26 Pout 2f0 3f0 25 28 2400 2450 2500 25 0 24 -10 23 -20 22 -30 21 20 -40 1.8 4 22 POUT vs. PIN, VCC = 2.4 V @ 2450 MHz POUT vs. VCC @ 2450 MHz, Pin = 1 dBm 10 19 Pout (dBm) Pin (dBm) 2.0 2.2 2.4 2.6 Vcc (V) 2.8 3.0 3.2 3.4 -2 -1 0 1 2 3 4 5 Pin (dBm) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0066 WDCT Power Amplifier 2400 - 2500 MHz Rev. V3 Typical Characteristics (All data uses the supplied sample board BOM) S21 vs. Frequency @ VCC = 2.4 V, VEN = 2.5 V 30 S22, S11 vs. Frequency @ VCC = 2.4 V, VEN = 2.5 V 0 25 -5 20 -10 15 -15 10 -20 5 S11 S22 0 1.0 -25 1.5 2.0 2.5 3.0 1.0 1.5 Frequency (GHz) 2.0 2.5 3.0 Frequency (GHz) Typical Characteristics, VEN = 1.7 V (All data uses the supplied sample board BOM) POUT, PAE, ICC vs. PIN @ 2.4 V, 2450 MHz POUT, PAE, ICC vs. VCC @ 2450 MHz, PIN = 0 dBm 1.0 40 1.0 40 PAE PAE 0.8 30 POUT 0.8 30 P OUT 20 0.6 20 0.4 10 0.4 0.2 0 0.2 0.0 -10 0.6 I CC I CC 10 0 -10 -15 -10 -5 0 5 0.0 2.0 2.3 2.6 Pin (dBm) 2.9 V 50 0.5 40 0.4 3.5 (V) CC POUT, PAE, ICC vs. Freq. @ 2450 MHz, PIN = 0 dBm 3.2 POUT vs. VEN @ 2.4 V, 2450 MHz, PIN = 0 dBm 30 20 I R = 100 Ohm 10 CC PAE 0 30 0.3 P OUT -10 20 0.2 10 0.1 -20 -30 -40 0 2.30 5 2.35 2.40 2.45 2.50 Frequency (GHz) 2.55 0.0 2.60 -50 0.0 0.5 1.0 V EN 1.5 2.0 (V) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.