A19-1 / SMA19-1 Cascadable Amplifier 10 to 1000 MHz Rev. V3 Features Product Image • HIGH OUTPUT POWER: +22.5 dBm (TYP.) • HIGH THIRD ORDER I.P.: +35 dBm (TYP.) • MEDIUM NOISE FIGURE: 6.0 dB (TYP.) Description The A19-1 RF amplifier is a discrete thin film hybrid design, which incorporates the use of thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. An active DC biasing network is used for temperaturestable performance, in addition to an RF Choke, used for power supply decoupling. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number Package A19-1 TO-8 SMA19-1 Surface Mount CA19-1 SMA Connectorized ** ** The connectorized version is not RoHs compliant. Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC Typical Parameter Absolute Maximum Ratings Parameter Absolute Maximum Storage Temperature -62ºC to +125ºC Guaranteed Units 25ºC 0º to 50ºC -54º to +85ºC* Frequency MHz 10-1100 10-1000 10-1000 Case Temperature +125ºC Small Signal Gain (min) dB 11.5 10.5 10.0 DC Voltage +17 V Gain Flatness (max) dB ±0.2 ±0.6 ±0.8 Continuous Input Power +13 dBm Reverse Isolation dB 16 Short Term Input power (1 minute max.) 100 mW Noise Figure (max) dB 5.5 6.5 7.0 Peak Power (3 µsec max.) 0.5 W Power Output @ 1 dB comp. (min) dBm 22.5 20.5 20.0 “S” Series Burn-In Temperature (case) +125ºC IP3 dBm +35 IP2 dBm +51 Second Order Harmonic IP dBm +58 VSWR Input / Output (max) DC Current @ 15 Volts (max) mA Thermal Data: VCC = +15 VDC Parameter Rating Thermal Resistance θjc 100ºC/W 1.5:1 / 1.5:1 1.7:1 / 1.7:1 2.0:1 / 2.3:1 Transistor Power Dissipation Pd 0.907 W 90 94 99 Junction Temperature Rise Above Case Tjc +91ºC * Over temperature performance limits for part number CA19-1, guaranteed from 0oC to +50oC only. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. A19-1 / SMA19-1 Cascadable Amplifier 10 to 1000 MHz Rev. V3 Outline Drawing: TO-8 * Typical Performance Curves at +25°C WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: Surface Mount * WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: SMA Connectorized * WEIGHT: 19 grams (0.67 oz.) max 2 ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.