Data Sheet SML-P1 Series PICOLEDTM-eco/PICOLEDTM 1006（0402） 1.0×0.6mm（t=0.2mm） Features ・Ultra compact, thin size 1.0×0.6mm ・Thinnest size in the world＊ t=0.2mm ・Original device technology enables high brightness and high reliability ・Accomplishes low power consuming application ・Specification assured at IF=1mA (PICOLEDTM-eco) Color Type V U D Y M P B WB HB ＊Investigated Aug. 2009 Specifications PICOLEDTM-eco Absolute Maximum Ratings (Ta＝25℃) Electrical and Optical Characteristics (Ta＝25℃) Chip Emitting Power Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Forward Peak Forward Reverse Operating Storage Structure Color Dissipation Current Current Voltage Temperature Temperature Typ. Min.*2 Typ. Max.*2 Max. Min. Typ. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Tstg(℃) (V) IF(mA) (μA) VR(V) (nm) (nm) (nm) IF(mA) (mcd) (mcd) IF(mA) Part No. ■ SML-P11VT Red ■ SML-P11UT ■ SML-P11DT AIGaInP Orange on GaAs ■ SML-P11YT Yellow ■ SML-P11MT Yellowish Green 1.8 50 52 20 100*1 5 -40 to +85 -40 to +100 1 10 4 1.9 54 621 626 631 1 3.6 616 621 626 1.6 5.5 602 605 608 583 586 589 566 569 1 572 1 7.3 2.5 7.6 0.63 2.1 ＊1:Duty1/10, 1kHz ＊2:Reference PICOLEDTM Absolute Maximum Ratings (Ta＝25℃) Chip Emitting Power Forward Peak Forward Reverse Operating Structure Color Dissipation Current Current Voltage Temp. PD(mW) IF(mA) IFP(mA) VR(V) Topr(℃) Part No. ■ SML-P12VT Red ■ SML-P12UT ■ SML-P12DT AIGaInP on GaAs ■ SML-P12YT Orange Yellow ■ SML-P12MT Yellowish Green ■ SML-P12PT Green ■ SMLP12BC7T Blue ■ SMLP12WBC7W InGaN White ■ SMLP12HBC7W Pink Electrical and Optical Characteristics (Ta＝25℃) Forward Voltage VF Reverse Current IR Dominant Wavelength λD Luminous Intensity IV Typ. IF(mA) Max. VR(V) Min.*2 Typ. Max.*2 IF(mA) Min. Typ. IF(mA) (V) (μA) (mcd) (mcd) (nm) (nm) (nm) Storage Temp. Tstg(℃) 50 2.0 52 2.1 54 20 100*1 5 -40 to +85 20 4 100 -40 to +100 2.2 66 2.9 5 5 74 10 625 630 635 615 620 625 602 605 608 587 590 593 60 25 20 85 100 40 569 572 575 10 35 557 560 563 4.0 13 465 470 475 5 (x, y) (0.30, 0.30) (x, y) (0.23, 0.10) 20 130 5.6 17 36 71 14 22 5 ＊1:Duty1/10, 1kHz ＊2:Reference Dimensions Recommended Solder Pattern Viewing Angle SML-P11/-P12 Series 1 0.6 Directivity (deg) Directivity (deg) ANGULAR DISPLACEMENT (deg) X Y 30° 20° 10° 0° 10° 20° 0.6 SCANNING ANGLE (deg) X’ 30° 0.5 (0.08) +0.05 30° 40° 90° 100 50 RELATIVE INTENSITY (%) 50° 60° 70° 80° 90° 100 50 0 RELATIVEINTENSITY INTENSITY (%) RELATIVE (%) 0.5 SMLP12 Series (deg) SCANNING ANGLE Directivity (deg) X’ Y’ 30° 20° 10° 0° 10° 20° Directivity (deg) ANGULAR DISPLACEMENT (deg) 80° （unit : mm） 50 0 50 10° 0° 10° 20° 30° 40° RELATIVEINTENSITY INTENSITY (%) (%) RELATIVE 50° 60° 60° 70° 70° Tolerance : ±0.05 （unit : mm） 20° 50° 60° 60° 90° 100 30° 40° 50° 50° 0.4 Y 40° 40° Terminal X 30° 80° 90° 100 70° 70° 80° 80° 90° 100 50 0 50 RELATIVEINTENSITY INTENSITY (%) RELATIVE (%) ＊ PICOLED is ROHM's pending trademark. TM www.rohm.com 90° 100 50 0.4 0.2 -0.02 20° 80° RELATIVE INTENSITY (%) 0.52 Cathode mark 10° 70° 80° 80° 0 0° 60° 70° 70° 50 10° 50° 60° 60° 90° 100 20° 30° 40° 50° 50° 0.6 Y’ 40° 40° © 2011 ROHM Co., Ltd. All rights reserved. 1/3 2011.05 - Rev.B 90° 100 SML-P1 series Electrical Characteristics Curves Forward Current-Forward Voltage ■ ■SML-P11VT ■SML-P11UT ■SML-P11DT ■SML-P11YT ■SML-P11MT 10.0 1.0 0.1 1.5 ■ ■ ■ ■SML-P12VT ■SML-P12UT ■SML-P12DT ■SML-P12YT ■SML-P12MT ■SML-P12PT 10 1.0 1.5 2.5 2.0 Ta=25°C 100 FORWARD VOLTAGE：VF (V) ■ ■SMLP12BC7T ■ SMLP12WBC7W ■SMLP12HBC7W 10 1.0 2.5 2.5 2.0 Ta=25°C 100 FORWARD CURRENT：IF (mA) FORWARD CURRENT：IF (mA) ■ FORWARD CURRENT：IF (mA) Ta=25°C 100.0 FORWARD VOLTAGE：VF (V) 3.0 3.5 FORWARD VOLTAGE：VF (V) Luminous Intensity-Atmosphere Temperature 1.4 ■SML-P11VT ■SML-P11UT ■SML-P11DT ■SML-P11YT ■SML-P11MT 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 IF=20mA 1.6 1.4 1.2 ■SML-P12VT ■SML-P12UT ■SML-P12DT ■SML-P12YT ■SML-P12MT ■SML-P12PT 1.0 0.8 0.6 0.4 -40 100 ■ ATMOSPHERE TEMPERATURE：Ta (°C) -20 0 20 40 60 80 IF=20mA 1.6 RELATIVE LUMINOUS INTENSITY RELATIVE LUMINOUS INTENSITY ■ RELATIVE LUMINOUS INTENSITY IF=20mA 1.6 ■SMLP12BC7T ■ SMLP12WBC7W ■SMLP12HBC7W 1.4 1.2 1.0 0.8 0.6 0.4 -40 100 ■ ATMOSPHERE TEMPERATURE：Ta (°C) -20 0 20 40 60 80 100 ATMOSPHERE TEMPERATURE：Ta (°C) Luminous Intensity-Forward Current ■ 1.0 ■ ■SML-P11VT ■SML-P11UT ■SML-P11DT ■SML-P11YT ■SML-P11MT 0.8 0.6 0.4 0.2 0 0 5 10 15 Ta=25°C 1.2 ■ 1.0 ■ ■ 0.8 ■SML-P12VT ■SML-P12UT ■SML-P12DT ■SML-P12YT ■SML-P12MT ■SML-P12PT 0.6 0.4 0.2 0 20 ■ 0 FORWARD CURRENT：IF (mA) 5 10 15 Ta=25°C 3 RELATIVE LUMINOUS INTENSITY RELATIVE LUMINOUS INTENSITY ■ RELATIVE LUMINOUS INTENSITY Ta=25°C 1.2 SMLP12BC7T ■ SMLP12WBC7W ■SMLP12HBC7W 2 1 0 20 ■ ■ 0 FORWARD CURRENT：IF (mA) 5 10 15 20 FORWARD CURRENT：IF (mA) Derating 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. ■ 30 20 10 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE：Ta (°C) 2/3 100 ■SML-P12VT ■SML-P12UT ■SML-P12DT ■SML-P12YT ■SML-P12MT ■SML-P12PT ■ 30 MAXIMUM FORWARD CURRENT：(mA) 20 ■SML-P11VT ■SML-P11UT ■SML-P11DT ■SML-P11YT ■SML-P11MT MAXIMUM FORWARD CURRENT： (mA) MAXIMUM FORWARD CURRENT： (mA) ■ 30 ■SMLP12BC7T ■ SMLP12WBC7W ■SMLP12HBC7W 20 10 0 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE：Ta (°C) 2011.05 - Rev.B SML-P1 series Rank Reference of Brightness Red (V, U) Luminous G H J K L M Intensity Package size(mm) Height(mm) (mcd) 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 Mini-mold 1006 Chip LEDs N P Q 16 to 25 25 to 40 S T U （Ta=25˚C, IF＝20mA） W X V 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 SML-P11VT※ SML-P11UT※ 0.2 R SML-P12VT SML-P12UT Orange (D) （Ta=25˚C, IF＝20mA） Luminous G H J K L M N P Q R S T U V W X Intensity Package size(mm) Height(mm) (mcd) 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 Mini-mold Chip LEDs 1006 SML-P11DT※ 0.2 SML-P12DT Yellow (Y) （Ta=25˚C, IF＝20mA） Luminous G H J K L M N P Q R S T U V W X Intensity Package size(mm) Height(mm) (mcd) 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 10 to 16 16 to 25 25 to 40 40 to 63 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1600 Mini-mold Chip LEDs 1006 SML-P11YT※ 0.2 SML-P12YT Green (M, P) Luminous F G H J K L Intensity Package size(mm) Height(mm) (mcd) 0.63 to 1.0 1.0 to 1.6 1.6 to 2.5 2.5 to 4.0 4.0 to 6.3 6.3 to 10 Mini-mold Chip LEDs 1006 M N P Q 10 to 16 16 to 25 25 to 40 40 to 63 SML-P11MT※ 0.2 R S T U V （Ta=25˚C, IF＝20mA） W X 63 to 100 100 to 160 160 to 250 250 to 400 400 to 630 630 to 1000 1000 to 1800 SML-P12MT SML-P12PT Blue (B) （Ta=25˚C, IF＝5mA） Luminous Package Intensity size (mcd) (mm) Height(mm) Mini-mold Chip LEDs 1006 G H J K L M N 0.9 to 1.4 1.4 to 2.2 2.2 to 3.6 3.6 to 5.6 5.6 to 9.0 9 to 14 P S T U V W SMLP12BC7T 0.2 （Ta=25˚C, IF＝5mA） Luminous Package Intensity size (mcd) (mm) Height(mm) N P Q R 14 to 25 25 to 36 36 to 56 S T U V W 56 to 90 90 to 140 140 to 220 220 to 360 360 to 560 560 to 900 SMLP12WBC7W 0.2 Pink (HB) （Ta=25˚C, IF＝5mA） Luminous Package Intensity size (mcd) (mm) Height(mm) Mini-mold Chip LEDs 1006 R 14 to 22 22 to 36 36 to 56 56 to 90 90 to 140 140 to 220 220 to 360 360 to 560 560 to 900 White (WB) Mini-mold Chip LEDs 1006 Q 0.2 N P Q 14 to 25 25 to 36 36 to 56 R S T U V W 56 to 90 90 to 140 140 to 220 220 to 360 360 to 560 560 to 900 SMLP12HBC7W ※:IF＝1mA Part No. Construction ∗ “−” will be taken out for emitting color W/B/E series. S M L Special Code will be applied for Emitting color W/B/E series. P 1 2 Series name Package name T M Chip Type Chromaticity rank(for white LED) Emitting Color T 8 6 Resin Color P Rank sign (Brightness Rank)∗ Taping Specifications 1 Low Current Type V Red:630nm T Transparent Colorless T86 Cathode at sprocket hole side 2 High Brightness Type U Red:620nm W MilkyWhite D T87 Reverse of T86 Orange:605nm Y Yellow:587(590)nm M Yellowish-Green:572nm P Green:560nm B 1 For white LED, cathode at sprocket hole side Blue:470nm WB White HB Pink ∗ Concerning the Brightness rank • Please refer to the rank chart above for luminous intensity classification. • Part name is individual for each rank. • When shipped as sample, the part name will be a representative part name. General products are free of ranks. Please contact sales if rank appointment is needed. Packing Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. 3/3 2011.05 - Rev.B Notice Notes Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2011 ROHM Co., Ltd. All rights reserved. R1120A