PROTEC SM8LC05_11

05019
SM8LC05 - SM8LC24
Only One Name Means ProTek’Tion™
800 WATT MULTI-LINE TVS ARRAY
Description
The SM8LCxx Series are high powered transient voltage suppressor arrays that provides board level protection for
standard TTL and MOS bus line applications against the damaging effects of ESD, tertiary lightning and switching
transients.
The SM8LCxx Series has a peak pulse power rating of 800 Watts for an 8/20µs waveshape. This device series meets
the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
SO-8 package
Features
applications
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns
• Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line)
• 800 Watts Peak Pulse Power per Line (tp = 8/20µs)
• Bidirectional Configuration
• Available in Multiple Voltages Ranging from 5V to 24V
• Protects up to Two Line Pairs
• Low Capacitance: 25pF
• RoHS Compliant
• REACH Compliant
• Video On-Demand
• Telecom Interfaces
• USB, ADSL & SCSI Interfaces
• LAN Interconnects
• Portable Electronics
Mechanical characteristics
• Molded JEDEC SO-8 Package
• Approximate Weight: 70 milligrams
• Lead-Free Pure-Tin Plating (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 12mm Tape and Reel Per EIA Standard 481
• Flammability Rating UL 94V-0
PIN CONFIGURATION
05019.R7 7/11
8
7
6
5
1
2
3
4
Page 1
www.protekdevices.com
05019
SM8LC05 - SM8LC24
Only One Name Means ProTek’Tion™
typical device characteristics
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
TL
-55 to 150
°C
Storage Temperature
TSTG
-55 to 150
°C
Peak Pulse Power (tp = 8/20µs) - See Figure 1
PPP
800
Watts
Operating Temperature
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
(Note 1 - 2)
DEVICE
MARKING
RATED
STAND-OFF
VOLTAGE
minimum
breakdown
voltage
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
MAXIMUM
LEAKAGE
CURRENT
MAXIMUM
CAPACITANCE
VWM
VOLTS
@1mA
V(BR)
VOLTS
@I P = 1A
VC
VOLTS
@ 8/20µs
VC @ IPP
@V WM
ID
µA
@0V, 1MHz
C
pF
SM8LC05
PGA
5.0
6.0
9.8
24.6V @ 45.0A
100
25
SM8LC08
PGB
8.0
8.5
13.3
25.5V @ 40.0A
10
25
SM8LC12
PGC
12.0
13.3
19.0
32.9V @ 34.0A
4
25
SM8LC15
PGD
15.0
16.7
25.5
38.5V @ 27.0A
4
25
SM8LC24
PGE
24.0
26.7
40.0
48.5V @ 22.0A
4
25
Note
1. Devices are designed to be used in parallel. For other applications, contact the factory. Do not surge in the “forward” direction of the TVS.
2. Do not surge from pins 1 to 8, 7 to 2, 6 to 3 and 4 to 5. PIV typically greater than 100 Volts for each rectifier diode.
05019.R7 7/11
Page 2
www.protekdevices.com
05019
SM8LC05 - SM8LC24
Only One Name Means ProTek’Tion™
typical device characteristics
figure 1
peak pulse power vs pulse time
PPP - Peak Pulse Power - Watts
10,000
800W, 8/20µs Waveform
1,000
100
10
0.1
10
100
td - Pulse Duration - µs
Peak Value IPP
80
100
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
e-t
60
40
10,000
figure 3
power derating curve
Peak Pulse Power
8/20µs
80
% Of Rated Power
tf
100
td = t/(IPP/2)
60
40
20
20
0
1,000
figure 2
pulse wave form
120
IPP - Peak Pulse Current - % of IPP
1
0
05019.R7 7/11
5
10
15
t - Time - µs
20
25
30
Page 3
0
Average Power
0
25
50
75 100 125
TA - Ambient Temperature - °C
150
www.protekdevices.com
05019
SM8LC05 - SM8LC24
Only One Name Means ProTek’Tion™
SPICE MODEL
figure 1
spice model
I/O
ABD
LCRD
LCRD
ABD
Lg
0.7nH
ABD - Avalanche Breakdown Diode (TVS)
LCRD: Low Capacitance Rectifier Diode
Lg - Lead Inductance
table 1 - spice parameters
parameter
05019.R7 7/11
unit
abd(tvs)
LCRD
BV
V
See Table 2
200
IBV
µA
1
0.01
Cjo
pF
See Table 2
5
IS
A
See Table 2
1E-13
Vj
V
0.6
0.6
M
-
0.33
0.33
N
-
1
1
RS
Ohms
See Table 2
0.31
TT
s
1E-8
1E-9
EG
eV
1.11
1.11
Page 4
www.protekdevices.com
05019
SM8LC05 - SM8LC24
Only One Name Means ProTek’Tion™
SO-8 package information
outline dimensions
dim
millimeters
-A-
inches
min
max
min
max
A
4.80
5.00
0.189
0.196
B
3.80
4.00
0.150
0.157
C
1.35
1.75
0.054
0.068
D
0.35
0.49
0.014
0.019
F
0.40
1.25
0.016
0.049
G
1.27 BSC
8
5
-B-
1
G
4
D
0.18
0.25
0.007
0.009
K
0.10
0.25
0.004
0.008
P
5.80
6.20
0.229
0.244
R
0.25
0.50
0.010
0.019
R x 45°
C
0.05 BSC
J
+ 0.010” (0.25mm) M B M
4 PL
P
0° - 10°
-T-
K
+ 0.010” (0.25mm) M T B S A S
8 PL
J
F
NOTES
1.
2.
3.
4.
5.
6.
-T- = Seating plane and datum surface.
Dimensions “A” and “B” are datum.
Dimensions “A” and “B” do not include mold protrusion.
Maximum mold protrusion is 0.015” (0.380mm) per side.
Dimensioning and tolerances per ANSI Y14.5M, 1982.
Dimensions are exclusive of mold flash and metal burrs.
A
pad layout dimensions
dim
millimeters
B
inches
min
max
min
max
A
1.14
1.40
0.045
0.055
B
0.64
0.89
0.025
0.035
C
6.22
-
0.245
-
D
3.94
4.17
0.155
0.165
E
1.02
1.27
0.040
0.050
NOTES
1. Controlling dimension: inches.
05019.R7 7/11
D
C
E
Page 5
www.protekdevices.com
05019
SM8LC05 - SM8LC24
Only One Name Means ProTek’Tion™
TAPE AND REEL
P0
D
t
10 Pitches Cumulative
Tolerance on tape ± 0.2
P2
E
F
W
K0
B0
A0
P
User Direction of Feed
specifications
Reel Dia.
Tape
Width
178mm (7”)
12mm
A0
B0
K0
D
E
F
W
P0
P2
P
tmax
6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10
0.25
Notes
1.
2.
3.
4.
5.
6.
Dimensions are in millimeters.
Surface mount product is taped and reeled in accordance with EIA-481.
Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape.
Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape.
Bulk product shipped in tubes of 98 pieces per tube.
Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package.
Package outline, pad layout and tape specifications per document number 06011.R4 8/10.
ORDERING INFORMATION
base PART NUMBER
(xx = Voltage)
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE qty
SM8LCxx
-LF
-T7
1,000
7”
98
SM8LCxx
-LF
-T13
2,500
13”
98
This device is only available in a Lead-Free configuration.
05019.R7 7/11
Page 6
www.protekdevices.com
05019
SM8LC05 - SM8LC24
Only One Name Means ProTek’Tion™
company information
COMPANY PROFILE
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for
the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
application specific protection solutions for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
By Fax
General: 602-431-2288
By E-mail:
Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]
Web
www.protekdevices.com
www.protekanalog.com
COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice.
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special,
consequential or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory.
05019.R7 7/11
Page 7
www.protekdevices.com