KODENSHI SCR0840

SCR0840
Sensitive Gate SCRs
400V, 0.8A Sensitive Gate SCRs
Features
y Repetitive Peak Off-State Voltage : 400V
y R.M.S On-State Current : IT(RMS)=0.8A
y Low On-state Voltage : VTM=1.2V(Typ.)
General Description
PNPN devices designed for high volume, line-powered
TO-92
consumer applications such as relay and lamp drivers,
small motor controls, gate drivers for larger thyristors,
Product Characteristics
and sensing and detection circuits. Supplied in an inexpensive plastic TO-92 package which is readily adaptable for use in automatic insertion equipment.
IT(RMS)
0.8A
VDRM
400V
VTM
1.2V
Ordering Information
Device
Marking Code
Package
Packaging
SCR0840
SCR0840
TO-92
Ammo Tape
Marking Information
Specific Device Name
SCR
0840
GYWW
Weekly Code
Grade & Rank Code
(“A” Rank Æ A, “B” Rank Æ B)
(01,02,03, ‥‥, 50, 51, 52)
Year Code
(2009 Æ 9, 2010 Æ 0, 2011 Æ 1)
KSD-D0A001-003
1
SCR0840
Absolute Maximum Ratings (Tj=25℃
Symbol
unless otherwise specified)
Parameter
Ratings
Unit
VDRM
Repetitive Peak Off-State Voltage
400
V
IT(RMS)
R.M.S On-State Current (180° conduction angles)
0.8
A
0.5
A
10
A
0.415
A2S
Forward Peak Gate Power Dissipation (Ta=25°C)
0.1
W
PG(AV)
Forward Average Gate Power Dissipation
(Ta=25°C, t=8.3mS)
0.10
W
VRGM
Reverse Peak Gate Voltage
5
V
IFGM
Forward Peak Gate Current
1
A
TSTG
Storage Temperature Range
-40~125
°C
Operating Junction Temperature
-40~125
°C
ITSM
Average On-State Current
(Half Sine Wave : TC=74°C)
Surge On-State Current
(1/2 Cycle, 60Hz, Peak, Non Repetitive)
I2t
Circuit Fusing Considerations (t=8.3mS)
IT(AV)
PGM
Tj
Thermal Characteristics
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
Rth(J-C)
Thermal Resistance
Junction to Case
-
-
1.3
°C/W
Rth(J-A)
Thermal Resistance
Junction to Ambient
-
60
-
°C/W
*Rth (J-A) : t= 10sec
KSD-D0A001-003
2
SCR0840
Electrical Characteristics (Ta=25℃)
Symbol
A
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
-
-
200
15
-
30
-
-
0.8
1.2
V
V
0.2
-
-
V
2
5
10
mA
mA
Gate Trigger Current(1)
VAK=7V, RL=100Ω
VGT
Gate Trigger Voltage(1)
VAK=7V, RL=100Ω, Ta=25°C
VAK=7V, RL=100Ω, Ta=-40°C
VGD
Non Trigger Gate Voltage
VAK=12V, RL=100Ω, Ta=125°C
Holding Current
VAK=12V, Gate open,
Initiating current=50mA
Ta=25°C
Ta=-40°C
-
IDRM
Repetitive Peak
Off-Stage Current
VAK=VDRM or VRRM, TC=25°C
VAK=VDRM or VRRM, TC=125°C
-
-
10
200
µA
µA
VTM
Peak On-Stage Voltage(2)
ITM=1A, Peak
-
1.2
1.7
V
IGT
B
IH
µA
(1) RGK Current is not included in measurement
(2) Forward current applied for 1ms maximum duration, duty cycle ≤1%
KSD-D0A001-003
3
SCR0840
Electrical Characteristic Curves
IGT - Junction Temperature
Fig. 2 VGT - Junction Temperature
Fig. 3
IH - Junction Temperature
Fig. 4
㎂
Fig. 1
㎂
㎂
IL - Junction Temperature
Fig. 6 Current Derating [ Ref. : Ambient Temp ]
Fig. 5 Current Derating [ Ref. : Case Temp. ]
α
α
α
α
α
α
α
α
α
α
KSD-D0A001-003
α
α
4
SCR0840
Package Outline Dimension
KSD-D0A001-003
5
SCR0840
The AUK Corp. products are intended for the use as components in general electronic
equipment (Office and communication equipment, measuring equipment, home
appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products
in equipments which require high quality and / or reliability, and in equipments which
could have major impact to the welfare of human life(atomic energy control, airplane,
spaceship, transportation, combustion control, all types of safety device, etc.). AUK
Corp. cannot accept liability to any damage which may occur in case these AUK Corp.
products were used in the mentioned equipments without prior consultation with AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
KSD-D0A001-003
6