October 19, 2005 SMD INDUCTOR DR78098 Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Tape & Reel Packing Available Materials meet UL94V-0 Operating Temp. -40°C to +130°C (see note below) ELECTRICAL SPECIFICATIONS AT 25ºC PART No. INDUCTANCE (µH) 33 ± 10% DR335-333 Note: 1. 2. DCR (Ω) Max. RATED CURRENT (A) Max. 0.14 1.20 @ 2.52MHz Full rated current is based on an ambient operating temperature of 85ºC with a 45ºC maximum temperature rise in free air. All materials are rated at 155ºC or higher. The DR78098 will be marked DR335-333 or 333 on the part. DR335-333 will be on the packaging. MECHANICAL OUTLINES 7.70±0.3 [0.303] 1.80 [0.071] 5.00 [0.197] 7.90 [0.311] 1.60 [0.063] 1 7.00±0.3 [0.276] 4.80 [0.189] DR335 7.20 [0.283] 2 TOP VIEW SIDE VIEW BOTTOM VIEW PCB SOLDER PAD LAYOUT (REF.) SCHEMATIC NOTES: 1. ALL DIMENSIONS ARE SHOWN IN MILLIMETER “mm”[INCHES “IN”]. 2. GENERAL TOLERANCE ±0.25mm[0.010 IN.], UNLESS OTHER SPECIFIED. DATATRONIC: 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specification are subject to change without notice.