PH4530L N-channel TrenchMOS™ logic level FET Rev. 02 — 26 January 2005 Product data sheet 1. Product profile 1.1 General description Logic level N-channel enhancement mode field effect transistor in a plastic package using TrenchMOS™ technology. 1.2 Features ■ Low thermal resistance ■ Logic level gate drive ■ SO8 equivalent area footprint ■ Low on-state resistance. 1.3 Applications ■ DC-to-DC converters ■ Portable appliances ■ Switched-mode power supplies ■ Notebook computers. 1.4 Quick reference data ■ VDS ≤ 30 V ■ Ptot ≤ 62.5 W ■ ID ≤ 80 A ■ RDSon ≤ 5.7 mΩ. 2. Pinning information Table 1: Discrete pinning Pin Description 1,2,3 source 4 gate mb mounting base; connected to drain Simplified outline Symbol D mb G mbb076 1 2 3 4 Top view SOT669 (LFPAK) S PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 3. Ordering information Table 2: Ordering information Type number PH4530L Package Name Description Version LFPAK plastic single-ended surface mounted package (LFPAK); 4 leads SOT669 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit 25 °C ≤ Tj ≤ 150 °C - 30 V - ±20 V Tmb = 25 °C; VGS = 10 V; Figure 2 and 3 - 80 A Tmb = 100 °C; VGS = 10 V; Figure 2 - 240 A Tmb = 25 °C; pulsed; tp ≤ 10 µs; Figure 3 - 50.7 A Tmb = 25 °C; Figure 1 - 62.5 W storage temperature −55 +150 °C junction temperature −55 +150 °C VDS drain-source voltage (DC) VGS gate-source voltage (DC) ID drain current (DC) IDM peak drain current Ptot total power dissipation Tstg Tj Source-drain diode IS source (diode forward) current (DC) Tmb = 25 °C - 52 A ISM peak source (diode forward) current Tmb = 25 °C; pulsed; tp ≤ 10 µs - 150 A - 130 mJ Avalanche ruggedness EDS(AL)S non-repetitive drain-source avalanche energy unclamped inductive load; ID = 36.2 A; tp = 0.24 ms; VDD ≤ 30 V; VGS = 10 V; starting Tj = 25 °C 9397 750 14031 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 2 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 03aa15 120 03aa23 120 Pder Ider (%) (%) 80 80 40 40 0 0 0 50 100 50 0 200 150 100 150 Tmb (°C) P tot P der = ----------------------- × 100% P ° ID I der = ------------------- × 100% I ° tot ( 25 C ) D ( 25 C ) Fig 1. Normalized total power dissipation as a function of mounting base temperature. Fig 2. Normalized continuous drain current as a function of mounting base temperature. 003aaa525 103 ID (A) 200 Tmb (°C) Limit RDSon = VDS / ID tp = 10 µ s 102 100 µ s DC 10 1 ms 10 ms 100 ms 1 10-1 1 102 10 VDS (V) Tmb = 25 °C; IDM is single pulse Fig 3. Safe operating area; continuous and peak drain currents as a function of drain-source voltage. 9397 750 14031 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 3 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 5. Thermal characteristics Table 4: Thermal characteristics Symbol Parameter Conditions thermal resistance from junction to mounting base Figure 4 Rth(j-mb) Min Typ Max Unit - - 2 K/W 5.1 Transient thermal impedance 003aaa526 10 Zth(j-mb) (K/W) 1 δ = 0.5 0.2 0.1 0.05 10-1 δ= P 0.02 tp T single pulse t tp T 10-2 10-5 10-4 10-3 10-2 10-1 tp (s) 1 Fig 4. Transient thermal impedance from junction to mounting base as a function of pulse duration. 9397 750 14031 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 4 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 6. Characteristics Table 5: Characteristics Tj = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Static characteristics V(BR)DSS drain-source breakdown voltage ID = 250 µA; VGS = 0 V 30 - - V VGS(th) gate-source threshold voltage ID = 1 mA; VDS = VGS; Figure 9 1 1.5 2 V IDSS drain-source leakage current VDS = 30 V; VGS = 0 V - 0.06 1 µA Tj = 25 °C Tj = 150 °C IGSS gate-source leakage current VGS = ±15 V; VDS = 0 V RDSon drain-source on-state resistance VGS = 10 V; ID = 15 A; Figure 7 and 8 Tj = 25 °C Tj = 150 °C - - 500 µA - 2 100 nA - 4.8 5.7 mΩ - 8.2 9.7 mΩ VGS = 5 V; ID = 15 A; Figure 7 and 8 - 5.8 7.2 mΩ ID = 25 A; VDS = 10 V; VGS = 5 V; Figure 13 - 23.5 - nC - 5.8 - nC - 6.5 - nC VGS = 0 V; VDS = 10 V; f = 1 MHz; Figure 11 - 1972 - pF - 769 pF - 304 - pF VDS = 10 V; ID = 25 A; VGS = 5 V; RG = 4.7 Ω - 22 - ns - 40 - ns Dynamic characteristics Qg(tot) total gate charge Qgs gate-source charge Qgd gate-drain (Miller) charge Ciss input capacitance Coss output capacitance Crss reverse transfer capacitance td(on) turn-on delay time tr rise time td(off) turn-off delay time - 48 - ns tf fall time - 18 - ns - 0.85 1.2 V - 38 - ns - Source-drain diode VSD source-drain (diode forward) voltage IS = 15 A; VGS = 0 V; Figure 12 trr reverse recovery time IS = 20 A; dIS/dt = −100 A/µs; VGS = 0 V 9397 750 14031 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 5 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 003aaa527 40 ID (A) VGS (V) = 2.9 3 10 ID (A) 5 30 003aaa528 40 30 2.8 2.7 20 25 °C 20 2.6 Tj = 150 °C 2.5 10 10 2.4 2.2 0 0 0 0.5 1 1.5 0 2 VDS (V) Tj = 25 °C 3 VGS (V) 4 Fig 6. Transfer characteristics: drain current as a function of gate-source voltage; typical values. 003aaa529 20 2.6 2 Tj = 25 °C and 150 °C; VDS > ID x RDSon Fig 5. Output characteristics: drain current as a function of drain-source voltage; typical values. RDSon (mΩ) 1 2.7 2.8 a 3 2.9 03al00 1.8 15 1.2 10 VGS (V) = 3.5 5 10 5 0.6 0 0 10 20 30 ID (A) 40 Tj = 25 °C 0 -60 60 120 Tj (°C) 180 R DSon a = ---------------------------R DSon ( 25 °C ) Fig 7. Drain-source on-state resistance as a function of drain current; typical values. Fig 8. Normalized drain-source on-state resistance factor as a function of junction temperature. 9397 750 14031 Product data sheet 0 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 6 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 03aa33 2.5 VGS(th) (V) 2 1.5 03aa36 10-1 ID (A) max 10-2 typ 10-3 min 10-5 0.5 0 -60 max 10-4 min 1 typ 10-6 0 60 120 Tj (°C) 0 180 1 2 VGS (V) 3 Tj = 25 °C; VDS = 5 V ID = 1 mA; VDS = VGS Fig 9. Gate-source threshold voltage as a function of junction temperature. Fig 10. Sub-threshold drain current as a function of gate-source voltage. 003aaa530 104 C (pF) Ciss 103 Coss Crss 102 10-1 1 10 VDS (V) 102 VGS = 0 V; f = 1 MHz Fig 11. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values. 9397 750 14031 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 7 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 003aaa531 40 003aaa532 10 VGS (V) IS (A) 8 30 6 20 150 °C 4 Tj = 25 °C 10 2 0 0.2 0 0.4 0.6 0.8 VSD (V) 1 Tj = 25 °C and 150 °C; VGS = 0 V 0 20 30 40 50 QG (nC) ID = 25 A; VDD = 10 V Fig 12. Source (diode forward) current as a function of source-drain (diode forward) voltage; typical values. Fig 13. Gate-source voltage as a function of gate charge; typical values. 9397 750 14031 Product data sheet 10 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 8 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 7. Package outline Plastic single-ended surface mounted package (LFPAK); 4 leads A2 A E SOT669 C c2 b2 E1 b3 L1 mounting base b4 D1 D H L2 1 2 3 e 4 w M A b X c 1/2 e A (A 3) A1 C θ L detail X y C 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT mm A A1 A2 A3 b b2 1.20 0.15 1.10 0.50 4.41 0.25 1.01 0.00 0.95 0.35 3.62 b3 b4 2.2 2.0 0.9 0.7 c D (1) c2 D1(1) E(1) E1(1) max 0.25 0.30 4.10 4.20 0.19 0.24 3.80 5.0 4.8 3.3 3.1 e H L L1 L2 w y θ 1.27 6.2 5.8 0.85 0.40 1.3 0.8 1.3 0.8 0.25 0.1 8° 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT669 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 03-09-15 04-10-13 MO-235 Fig 14. SOT669 (LFPAK) package outline. 9397 750 14031 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 9 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 8. Revision history Table 6: Revision history Document ID Release date PH4530L_2 20050126 Product data sheet Modifications: PH4530L_1 • • • • Data sheet Change status notice - Doc. number Supersedes 9397 750 14031 PH4530L_1 Section 1.4 “Quick reference data” ID and RDSon values updated Table 3 “Limiting values” ID and IDM values updated Figure 3, Figure 6, Figure 11 and Figure 13 updated Table 5 “Characteristics” RDSon, Qg(tot), Qgs, Qgd, Ciss, Coss and Crss values updated. 20040304 Preliminary data sheet 9397 750 12813 9397 750 14031 Product data sheet - © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 10 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 9. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 10. Definitions customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 12. Trademarks TrenchMOS — is a trademark of Koninklijke Philips Electronics N.V. 11. Disclaimers Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 13. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: [email protected] 9397 750 14031 Product data sheet © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 02 — 26 January 2005 11 of 12 PH4530L Philips Semiconductors N-channel TrenchMOS™ logic level FET 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 5.1 6 7 8 9 10 11 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Transient thermal impedance . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11 © Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 26 January 2005 Document number: 9397 750 14031 Published in The Netherlands