Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8412669150 Item: HM12-1E69-150 Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Thermal resistance Pull-In voltage Drop-Out voltage = Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Special Product Data Number of contacts Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Case colour Housing material Sealing compound Connection pins Reach / RoHS conformity Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 69 Min E - bistable NO ! "# #! !$ % not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC & ' ( )# Start Value * !+ ( #+ RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch , . ' ' / Max Unit .0 Conditions Min Typ 1 according to IEC 255-5 RH <45%, 200 VDC test voltage , gray Polycarbonat Polyurethan Copper alloy tin plated yes Modifications in the sense of technical progress are reserved Designed at: 24.04.09 Designed by: MPOTUZAK Approval at: 24.04.09 Approval by: DSTASTNY Last Change at: 20.04.10 Last Change by: WKOVACS Approval at: 22.04.10 Approval by: KOLBRICH Version: 04 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8412669150 Item: HM12-1E69-150 Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min 4 4 wave soldering max. 5 sec. Max 3 Unit 1 1 2 2 2 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Remarks Remarks 1. Remarks 2. Remarks 3. Total weigth Packaging Typ Max Unit in the operation of this latching relay the contact is closed by using a positive pulse (>2ms) to the "+" pole of the coil. This condition is maintened until the coil receives a negative pulse (>2ms) 1 10 pcs HM-relay box - cable version Modifications in the sense of technical progress are reserved Designed at: 24.04.09 Designed by: MPOTUZAK Approval at: 24.04.09 Approval by: DSTASTNY Last Change at: 20.04.10 Last Change by: WKOVACS Approval at: 22.04.10 Approval by: KOLBRICH Version: 04