Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Item No.: 9240100021 Item: MK24-B-2-OE Modifications in the sense of technical progress are reserved Designed at: 15.03.10 Designed by: THAUKE Approval at: 20.08.10 Approval by: JHEYDER Last Change at: 22.11.10 Last Change by: THAUKE Approval at: 24.11.10 Approval by: JHEYDER Version: 3 Europe: +49 / 7731 8399 0 | Email: [email protected] USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] Magnetic properties Item No.: 9240100021 Item: MK24-B-2-OE Conditions Min Pull-In at 20°C Drop out at 20°C Test equipment Pull-In in milliTesla (modified conta phys. caused tolerance +/- 0,1mT Test equipment Max Unit KMS-11 + AP74 MS-150 Conditions Contact data 04 Typ Min Contact - No. Contact-form Typ Max Unit 04 B - NC Ruthenium Contact rating ( > 9 AT ) Switching voltage Switching current (> 9 AT ) Carry current (> 9 AT ) Contact resistance static (>9AT ) Insulation resistance Breakdown voltage ( > 9 AT ) Special Product Data not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !" # $ Start value % & "#" & RH <45 %, 100 V test voltage according to IEC 255-5 ' Conditions Min Housing material Typ Max Unit mineral-filled epoxy Environmental data Shock Vibration Remark Operating temperature Storage temperature Washability Remark Conditions Min Max Unit ( ( Pick & place force should not exceed 25cN! ) ) fully sealed no direct touch between sensor and strong magnets! Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Packaging Typ Max Unit T&R per 1000 pcs Modifications in the sense of technical progress are reserved Designed at: 15.03.10 Designed by: THAUKE Approval at: 20.08.10 Approval by: JHEYDER Last Change at: 22.11.10 Last Change by: THAUKE Approval at: 24.11.10 Approval by: JHEYDER Version: 3