MAXIM DG444DY

19-4705; Rev 4; 6/04
Improved, Quad, SPST Analog Switches
Maxim’s redesigned DG444/DG445 analog switches
now feature on-resistance matching (4Ω max) between
switches and guaranteed on-resistance flatness over
the signal range (9Ω max). These low on-resistance
switches conduct equally well in either direction. They
guarantee low charge injection (10pC max), low power
consumption (35µW max), and an electrostatic discharge (ESD) tolerance of 2000V (min) per Method
3015.7. The new design offers lower off-leakage current
over temperature (less than 5nA at +85°C).
The DG444/DG445 are quad, single-pole/single-throw
(SPST) analog switches. The DG444 has four normally
closed switches and the DG445 has four normally open
switches. Switching times are less than 250ns for tON
and less than 70ns for tOFF. Operation is from a single
+10V to +30V supply, or bipolar ±4.5V to ±20V supplies. Maxim’s improved DG444/DG445 continue to be
fabricated with a 44V silicon-gate process.
New Features
♦
♦
♦
♦
♦
Plug-In Upgrades for Industry-Standard DG444/DG445
Improved RON Match Between Channels (4Ω max)
Guaranteed RFLAT(ON) Over Signal Range (9Ω max)
Improved Charge Injection (10pC max)
Improved Off-Leakage Current Over Temperature
(< 5nA at +85°C)
♦ Withstand ESD (2000V min)
per Method 3015.7
Existing Features
♦ Low RDS(ON) (85Ω max)
♦ Single-Supply Operation +10V to +30V
Bipolar-Supply Operation ±4.5V to ±20V
♦ Low Power Consumption (35µW max)
♦ Rail-to-Rail Signal Handling
♦ TTL/CMOS-Logic Compatible
________________________Applications
Ordering Information
Sample-and-Hold Circuits
Communication Systems
Test Equipment
Battery-Operated Systems
DG444CJ
0°C to +70°C
16 Plastic DIP
Heads-Up Displays
PBX, PABX
DG444CY
0°C to +70°C
16 Narrow SO
Guidance and Control
Systems
Audio Signal Routing
DG444C/D
0°C to +70°C
Dice*
Modems/Faxes
DG444DJ
-40°C to +85°C
16 Plastic DIP
DG444DY
-40°C to +85°C
16 Narrow SO
Military Radios
PART
TEMP RANGE
PIN-PACKAGE
Ordering Information continued at end of data sheet.
*Contact factory for dice specifications.
Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
IN1
1
16 IN2
D1
2
15 D2
S1
3
14 S2
V-
4
GND
5
S4
6
11 S3
D4
7
10 D3
IN4
8
13 V+
DG444
DIP/SO
0
1
IN1
IN2
D2
16
15
14
13
S1
1
12
S2
V-
2
11
V+
GND
3
10
VL
S4
4
9
S3
12 V L
9
LOGIC
D1
DG444
SWITCH
DG444
IN3
5
6
7
8
D4
IN4
IN3
D3
Thin QFN
ON
OFF
SWITCHES SHOWN FOR LOGIC "0" INPUT
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
DG444/DG445
General Description
ABSOLUTE MAXIMUM RATINGS
(Voltage Referenced to V-)
V+........................................................................................44V
GND ....................................................................................25V
VL ..................................................(GND - 0.3V) to (V+ + 0.3V)
Digital Inputs VS, VD (Note 1).......(V- - 2V) to (V+ + 2V) or 30mA
(whichever occurs first)
Continuous Current (any terminal) ......................................30mA
Peak Current, S or D (pulsed at 1ms, 10% duty cycle max) .100mA
Continuous Power Dissipation (TA = +70°C)
6-Pin Narrow SO (derate 8.70mW/°C above +70°C) ...696mW
16-Pin PDIP (derate 10.53mW/°C above +70°C)..........842mW
16-Pin Thin QFN (derate 33.3mW/°C above +70°C) ..2667mW
Operating Temperature Ranges
DG444C/DG445C ................................................0°C to +70°C
DG444D, E/DG445D, E ....................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on S, D, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = 15V, V- = -15V, VL = 5V, GND = 0, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
(Note 2)
MAX
UNITS
SWITCH
Analog Signal Range
VANALOG
(Note 3)
Drain-Source
On-Resistance
V+ = 13.5V, V- = -13.5V,
VD = ±8.5V, IS = -10mA
TA = +25°C
RDS(ON)
VD = ±10V,
IS = -10mA
TA = +25°C
4
TA = TMIN to TMAX
5
VD = ±5V,
On-Resistance Flatness (Note 4) RFLAT(ON)
IS = -10mA
TA = +25°C
9
TA = TMIN to TMAX
15
On-Resistance Match
Between Channels (Note 4)
∆RDS(ON)
-15
+15
50
TA = TMIN to TMAX
Source Leakage Current
(Note 5)
V+ = 16.5V, V- = -16.5V,
VD = ±15.5V,
VS = 15.5V
TA = +25°C
IS(OFF)
Drain Off-Leakage Current
(Note 5)
V+ = 16.5V, V- = -16.5V,
VD = ±15.5V,
VS = 15.5V
TA = +25°C
ID(OFF)
Drain On-Leakage Current
(Note 5)
ID(ON)
or
IS(ON)
V+ = 16.5V, V- = -16.5V,
VD = ±15.5V,
VS = ±15.5V
TA = +25°C
±
±
DG444/DG445
Improved, Quad, SPST Analog Switches
85
100
-0.50
+0.01
V
Ω
Ω
Ω
+0.50
nA
TA = TMIN to TMAX
-5
-0.50
+5
+0.01
+0.50
nA
TA = TMIN to TMAX
-5
-0.50
+5
+0.08
+0.50
nA
TA = TMIN to TMAX
-10
+10
INPUT
Input Current with
Input Voltage High
Input Current with
Input Voltage Low
2
IINH
VIN = 2.4V, all others = 0.8V
-0.5
-0.00001
+0.5
µA
IINL
VIN = 0.8V, all others = 2.4V
-0.5
-0.00001
+0.5
µA
_______________________________________________________________________________________
Improved, Quad, SPST Analog Switches
DG444/DG445
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)
(V+ = 15V, V- = -15V, VL = 5V, GND = 0, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
(Note 2)
MAX
UNITS
SWITCH
Power-Supply Range
Positive Supply Current
Negative Supply Current
Logic Supply Current
Ground Current
V+, VI+
I-
IL
IGND
±4.5
All channels on or off, V+ =
16.5V, V- = -16.5V, VIN = 0V
or 5V
All channels on or off, V+ =
16.5V, V- = -16.5V, VIN = 0V
or 5V
All channels on or off, V+ =
16.5V, V- = -16.5V, VIN = 0V
or 5V
TA = +25°C
-1
TA = TMIN to TMAX
-5
TA = +25°C
-1
TA = TMIN to TMAX
-5
TA = +25°C
-1
TA = TMIN to TMAX
-5
±20.0
-0.001
V
+1
µA
+5
-0.0001
+1
µA
+5
-0.001
+1
µA
+5
All channels on or off, V+ =
16.5V, V- = -16.5V, VIN = 0V
or 5V
TA = +25°C
-1
TA = TMIN to TMAX
-5
VS = ±10V, Figure 2
TA = +25°C
150
250
ns
DG444, VS = ±10V, Figure 2 TA = +25°C
90
120
ns
DG445, VS = ±10V, Figure 2 TA = +25°C
110
170
ns
TA = +25°C
5
10
pC
TA = +25°C
60
dB
TA = +25°C
100
dB
4
pF
-0.0001
+1
µA
+5
INPUT
Turn-On Time
tON
Turn-Off Time
tOFF
Charge Injection (Note 3)
Off-Isolation Rejection
Ratio (Note 6)
Q
OIRR
Crosstalk (Note 7)
CL = 1nF, VGEN = 0,
RGEN = 0Ω, Figure 3
RL = 50Ω, CL = 5pF,
f = 1MHz, Figure 4
RL -50Ω, CL = 5pF,
f = 1MHz, Figure 5
Source Off-Capacitance
CS(OFF)
f = 1MHz, Figure 6
TA = +25°C
Drain Off-Capacitance
CD(OFF)
f = 1MHz, Figure 6
TA = +25°C
4
pF
Source On-Capacitance
CS(ON)
f = 1MHz, Figure 7
TA = +25°C
16
pF
Drain On-Capacitance
CD(ON)
f = 1MHz, Figure 7
TA = +25°C
16
pF
_______________________________________________________________________________________
3
ELECTRICAL CHARACTERISTICS—Single Supply
(V+ = 12V, V- = 0, VL = 5V, GND = 0, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
MIN
CONDITIONS
TYP
(Note 2)
MAX
UNITS
SWITCH
Analog Signal Range
VANALOG
(Note 3)
Drain-Source
On-Resistance
RDS(ON)
V+ = 10.8V; VL = 5.25V;
VD = 3V, 8V; IS = -10mA
0
12
TA = +25°C
100
TA = TMIN to TMAX
160
200
V
Ω
SUPPLY
Power-Supply Range
V+, V-
Power-Supply Current
I+
All channels on or off,
VIN = 0V or 5V
Negative Supply Current
I-
All channels on or off,
VIN = 0V or 5V
Logic Supply Current
IL
All channels on or off,
VIN = 0V or 5V
IGND
Ground Current
10.8
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
-1
-5
-1
-5
All channels on or off,
VIN = 0V or 5V
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
-1
-5
-1
-5
24.0
+0.001
+1
+5
+1
+5
-0.0001
+0.001
+1
+5
+1
+5
-0.0001
V
µA
µA
µA
µA
DYNAMIC
Turn-On Time
tON
VS = 8V, Figure 2
TA = +25°C
300
400
ns
Turn-Off Time
tOFF
VS = 8V, Figure 2
TA = +25°C
60
200
ns
CL = 1nF, VGEN = 0,
RGEN = 0Ω, Figure 3
TA = +25°C
5
10
pC
Charge Injection (Note 3)
Q
Note 2: Typical values are for design aid only, are not guaranteed, and are not subject to production testing. The algebraic convention,
where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet.
Note 3: Guaranteed by design.
Note 4: On-resistance match between channels and flatness are guaranteed only with bipolar-supply operation. Flatness is defined
as the difference between the maximum and the minimum value of on-resistance as measured at the extremes of the specified analog signal range.
Note 5: Leakage parameters IS(OFF), ID(OFF), ID(ON), and IS(ON) are 100% tested at the maximum rated hot temperature and guaranteed at +25°C.
Note 6: Off-Isolation Rejection Ratio = 20log (VD/VS), VD = output, VS = input to off switch.
Note 7: Between any two switches.
__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
ON-LEAKAGE CURRENTS
TA = +85°C
V+ = 15V
V- = -15V
-10
-5
0
VS, VD (V)
5
10
15
DG444/5-3
2.0
1.5
TA = +85°C
IN LOW MAX
0.5
V+ = 15V
V- = -15V
-1
-2
4
0
-0.5
-1
IN HI MIN
2.5
VIN (V)
OFF-LEAKAGE (nA)
0
3.0
TA = +125°C
0.5
TA = +125°C
3.5
DG444/5-2
1
1
-15
SWITCHING THRESHOLD vs.
BIPOLAR SUPPLY VOLTAGE
OFF-LEAKAGE CURRENTS
DG444/5-1
2
ON-LEAKAGE (nA)
DG444/DG445
Improved, Quad, SPST Analog Switches
0
-15
-10
-5
5
0
VS, VD (V)
10
15
±5
±10
±15
BIPOLAR SUPPLY VOLTAGE (V)
_______________________________________________________________________________________
±20
Improved, Quad, SPST Analog Switches
ON-RESISTANCE vs. VD AND
BIPOLAR-SUPPLY VOLTAGE
V+ = 5V
±5V
125
V+ = 10V
100
DG444/5-5
120
DG444/5-4
150
ON-RESISTANCE vs. VD, BIPOLARSUPPLY VOLTAGE AND TEMPERATURE
V+ = 15V, V- = -15V
80
90
75
V+ = 20V
50
rDS(ON) (Ω)
rDS(ON) (Ω)
±10V
60
±15V
30
20
0
0
5
10
15
20
-20
-10
TA = +25°C
40
TA = -55°C
±20V
25
0
TA = +125°C
60
0
10
0
-15
20
-10
10
VD (V)
0
VD (V)
ON-RESISTANCE vs. VD, UNIPOLARSUPPLY VOLTAGE AND TEMPERATURE
SWITCHING TIME vs.
BIPOLAR-SUPPLY VOLTAGE
SWITCHING TIME vs.
UNIPOLAR-SUPPLY VOLTAGE
TA = +125°C
200
DG444/5-8
160
DG444/5-7
150
-5
5
VD (V)
15
DG444/5-9
rDS(ON) (Ω)
100
V+ = 15V
DG444/5-6
ON-RESISTANCE vs. VD
AND UNIPOLAR-SUPPLY VOLTAGE
V- = 0V
125
150
120
tON
TIME (ns)
TA = -40°C
80
100
tON
50
tOFF
50
40
tOFF
V+ = 12V
V- = 0V
0
0
0
4
8
0
±5
12
±10
±15
±20
10
15
20
UNIPOLAR-SUPPLY VOLTAGE (V)
BIPOLAR-SUPPLY VOLTAGE (V)
VD (V)
CHARGE INJECTION vs.
VD VOLTAGE
CHARGE INJECTION vs.
VD VOLTAGE
10
DG444/5-10
20
V+ = 12V
V- = 0V
CL = 1nF
Q (pC)
V+ = 15V
V- = -15V
CL = 1nF
25
0
DG444/5-11
25
Q (pC)
rDS(ON) (Ω)
75
TIME (ns)
TA = +25°C
100
0
-10
-20
-15
-10
0
VD (V)
10
15
0
5
10
15
VD (V)
_______________________________________________________________________________________
5
DG444/DG445
Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
DG444/DG445
Improved, Quad, SPST Analog Switches
_____________________Pin Description
PIN
NAME
FUNCTION
DIP/SO
THIN QFN
1, 16, 9, 8
15, 14, 7, 6
IN1–IN4
Logic Control
Inputs
2, 15, 10, 7
16, 13, 8, 5
D1–D4
Drain Outputs
3, 14, 11, 6
1, 12, 9 4
S1–S4
Source Outputs
Negative-Supply
Voltage Input
4
2
V-
5
3
GND
12
10
Ground
VL
Logic-Supply
Voltage Input
13
11
V+
Positive-SupplyVoltage
Input—Connected
to Substrate
—
EP
PAD
Exposed Pad
Connect Pad to V+
Applications Information
ate with ±4.5V to ±20V bipolar supplies or with a +10V
to +30V single supply; connect V- to 0V when operating
with a single supply. Also, all device types can operate
with unbalanced supplies such as +24V and -5V. VL
must be connected to +5V to be TTL compatible, or to
V+ for CMOS-logic level inputs. The Typical Operating
Characteristics graphs show typical on-resistance with
±20V, ±15V, ±10V, and ±5V supplies. (Switching times
increase by a factor of two or more for operation at ±5V.)
Overvoltage Protection
Proper power-supply sequencing is recommended
for all CMOS devices. Do not exceed the absolute
maximum ratings because stresses beyond the listed ratings may cause permanent damage to the
devices. Always sequence V+ on first, followed by
VL , V-, and logic inputs. If power-supply sequencing is not possible, add two small, external signal
diodes in series with supply pins for overvoltage
protection (Figure 1). Adding diodes reduces the
analog signal range to 1V below V+ and 1V above
V-, but low switch resistance and low leakage characteristics are unaffected. Device operation is
unchanged, and the difference between V+ and Vshould not exceed +44V.
V+
General Operation
• Switches are open when power is off.
• IN, D, and S should not exceed V+ or V-, even with
the power off.
S
• Switch leakage is from each analog switch terminal
to V+ or V-, not to other switch terminals.
D
Vg
Operation with Supply Voltages
Other than ±15V
Using supply voltages other than ±15V will reduce the
analog signal range. The DG444/DG445 switches oper-
LOGIC
INPUT
V-
Figure 1. Overvoltage Protection Using External Blocking Diodes
+5V
+15V
VL
V+
DG444
DG445
+3V
t f < 20ns
t r < 20ns
50%
SWITCH
INPUT
S
D
VOUT
0V
IN
tOFF
VOUT
0.8 x VOUT
SWITCH
OUTPUT
0.8 x VOUT
LOGIC
INPUT
+3V
RL
GND
V-
-15V
0V
tON
LOGIC INPUT WAVEFORM IS INVERTED FOR SWITCHES
THAT HAVE THE OPPOSITE LOGIC SENSE.
REPEAT TEST FOR CHANNELS 2, 3, AND 4.
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
RL
VOUT = VD
RL + rDS(ON)
(
)
Figure 2. Switching Time
6
_______________________________________________________________________________________
CL
Improved, Quad, SPST Analog Switches
VOUT
RGEN
+5V
+15V
VL
V+
DG444
DG445
D
S
VOUT
IN
OFF
DG444
ON
OFF
VGEN
CL
GND
OFF
ON
V-
IN
-15V
OFF
IN
VIN = +3V
Q = ∆VOUT × CL
DG445
DG444/DG445
∆VOUT
Figure 3. Charge Injection
10nF
SIGNAL
GENERATOR
10dBm
+5V
+15V
SIGNAL
GENERATOR
VL
V+
D
10nF
DG444
DG445
RGEN = 50Ω
10dBm
D
+15V
+5V
V+
VL
DG444
DG445
50Ω
S
RGEN = 50Ω
IN
IN
0V or +2.4V
IN
0V or +2.4V
NETWORK
ANALYZER
S
GND
V-
NETWORK
ANALYZER
10nF
RL
0V or +2.4V
S
D
GND
-15V
Figure 5. Crosstalk
Figure 4. Off-Isolation Rejection Ratio
10nF
D
+15V
V+
+5V
DG444
DG445
VL
10nF
D
CAPACITANCE
METER
IN
f = 1MHz
0V or +2.4V
S
V-
-15V
Figure 6. Source/Drain Off-Capacitance
10nF
+15V
+5V
V+
VL
DG444
DG445
IN
f = 1MHz
VD
GND
NC
10nF
RL
-15V
CAPACITANCE
METER
V-
0V or +2.4V
S
GND
V-
10nF
-15V
Figure 7. Source/Drain On-Capacitance
_______________________________________________________________________________________
7
Improved, Quad, SPST Analog Switches
DG444/DG445
Pin Configurations/Functional Diagrams (continued)
TOP VIEW
IN1
1
16 IN2
D1
2
15 D2
S1
3
14 S2
V-
4
GND
5
S4
6
11 S3
D4
7
10 D3
IN4
8
13 V+
DG445
D1
IN1
IN2
D2
16
15
14
13
S1
1
12
S2
V-
2
11
V+
GND
3
10
VL
S4
4
9
S3
12 V L
9
DG445
IN3
5
DIP/SO
LOGIC
0
1
D4
DG445
SWITCH
6
7
8
IN4
IN3
D3
Thin QFN
OFF
ON
Ordering Information (continued)
PART
TEMP RANGE
PIN-PACKAGE
DG444ETE
-40°C to +85°C
16 Thin QFN (5mm
x 5mm)
DG445CJ
0°C to +70°C
16 Plastic DIP
DG445CY
0°C to +70°C
16 Narrow SO
DG445C/D
0°C to +70°C
Dice*
DG445DJ
-40°C to +85°C
16 Plastic DIP
DG445DY
-40°C to +85°C
16 Narrow SO
DG445ETE
-40°C to +85°C
16 Thin QFN (5mm
x 5mm)
*Contact factory for dice specifications.
8
_______________________________________________________________________________________
Improved, Quad, SPST Analog Switches
PDIPN.EPS
_______________________________________________________________________________________
9
DG444/DG445
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
QFN THIN.EPS
DG444/DG445
Improved, Quad, SPST Analog Switches
D2
D
MARKING
b
C
L
0.10 M C A B
D2/2
D/2
k
L
XXXXX
E/2
E2/2
C
L
(NE-1) X e
E
DETAIL A
PIN # 1
I.D.
E2
PIN # 1 I.D.
0.35x45∞
e
(ND-1) X e
DETAIL B
e
L
L1
C
L
C
L
L
L
e
e
0.10 C
A
C
0.08 C
A1 A3
PACKAGE OUTLINE,
16, 20, 28, 32L THIN QFN, 5x5x0.8mm
21-0140
-DRAWING NOT TO SCALE-
COMMON DIMENSIONS
A1
0.70 0.75 0.80 0.70 0.75 0.80 0.70 0.75 0.80 0.70 0.75 0.80
0
A3
b
D
E
L1
0
0.02 0.05
0
0.20 REF.
0.20 REF.
0.02 0.05
0
0.20 REF.
0.02 0.05
0.20 REF.
0.25 0.30 0.35 0.25 0.30 0.35 0.20 0.25 0.30 0.20 0.25 0.30
4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10
4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10 4.90 5.00 5.10
0.80 BSC.
e
k
L
0.02 0.05
0.65 BSC.
0.50 BSC.
0.50 BSC.
0.25 - 0.25 - 0.25 - 0.25
0.30 0.40 0.50 0.45 0.55 0.65 0.45 0.55 0.65 0.30 0.40 0.50
-
-
-
-
-
N
ND
NE
16
4
4
20
5
5
JEDEC
WHHB
WHHC
-
-
1
2
EXPOSED PAD VARIATIONS
PKG.
20L 5x5
28L 5x5
32L 5x5
16L 5x5
SYMBOL MIN. NOM. MAX. MIN. NOM. MAX. MIN. NOM. MAX. MIN. NOM. MAX.
A
G
-
-
-
28
7
7
WHHD-1
-
-
32
8
8
WHHD-2
NOTES:
1. DIMENSIONING & TOLERANCING CONFORM TO ASME Y14.5M-1994.
2. ALL DIMENSIONS ARE IN MILLIMETERS. ANGLES ARE IN DEGREES.
3. N IS THE TOTAL NUMBER OF TERMINALS.
D2
L
E2
PKG.
CODES
MIN.
NOM. MAX.
MIN.
NOM. MAX.
±0.15
T1655-1
T1655-2
T1655N-1
3.00
3.00
3.00
3.10 3.20 3.00
3.10 3.20 3.00
3.10 3.20 3.00
3.10 3.20
3.10 3.20
3.10 3.20
T2055-2
T2055-3
T2055-4
3.00
3.00
3.00
3.10 3.20 3.00
3.10 3.20 3.00
3.10 3.20 3.00
3.10 3.20
3.10 3.20
3.10 3.20
**
**
**
**
T2055-5
T2855-1
T2855-2
T2855-3
T2855-4
T2855-5
T2855-6
T2855-7
T2855-8
T2855N-1
T3255-2
T3255-3
T3255-4
T3255N-1
3.15
3.15
2.60
3.15
2.60
2.60
3.15
2.60
3.15
3.15
3.00
3.00
3.00
3.00
3.25
3.25
2.70
3.25
2.70
2.70
3.25
2.70
3.25
3.25
3.10
3.10
3.10
3.10
3.25
3.25
2.70
3.25
2.70
2.70
3.25
2.70
3.25
3.25
3.10
3.10
3.10
3.10
4. THE TERMINAL #1 IDENTIFIER AND TERMINAL NUMBERING CONVENTION SHALL
CONFORM TO JESD 95-1 SPP-012. DETAILS OF TERMINAL #1 IDENTIFIER ARE
OPTIONAL, BUT MUST BE LOCATED WITHIN THE ZONE INDICATED. THE TERMINAL #1
IDENTIFIER MAY BE EITHER A MOLD OR MARKED FEATURE.
3.35
3.35
2.80
3.35
2.80
2.80
3.35
2.80
3.35
3.35
3.20
3.20
3.20
3.20
3.15
3.15
2.60
3.15
2.60
2.60
3.15
2.60
3.15
3.15
3.00
3.00
3.00
3.00
3.35
3.35
2.80
3.35
2.80
2.80
3.35
2.80
3.35
3.35
3.20
3.20
3.20
3.20
**
**
0.40
DOWN
BONDS
ALLOWED
NO
YES
NO
NO
YES
NO
Y
**
NO
NO
YES
YES
NO
**
**
0.40
**
**
**
**
**
NO
YES
Y
N
NO
YES
NO
NO
**
**
**
**
** SEE COMMON DIMENSIONS TABLE
5. DIMENSION b APPLIES TO METALLIZED TERMINAL AND IS MEASURED BETWEEN 0.25 mm AND 0.30 mm
FROM TERMINAL TIP.
6. ND AND NE REFER TO THE NUMBER OF TERMINALS ON EACH D AND E SIDE RESPECTIVELY.
7. DEPOPULATION IS POSSIBLE IN A SYMMETRICAL FASHION.
8. COPLANARITY APPLIES TO THE EXPOSED HEAT SINK SLUG AS WELL AS THE TERMINALS.
9. DRAWING CONFORMS TO JEDEC MO220, EXCEPT EXPOSED PAD DIMENSION FOR T2855-1,
T2855-3 AND T2855-6.
10. WARPAGE SHALL NOT EXCEED 0.10 mm.
11. MARKING IS FOR PACKAGE ORIENTATION REFERENCE ONLY.
12. NUMBER OF LEADS SHOWN ARE FOR REFERENCE ONLY.
PACKAGE OUTLINE,
16, 20, 28, 32L THIN QFN, 5x5x0.8mm
21-0140
-DRAWING NOT TO SCALE-
G
2
2
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
10 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2004 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.