MA-COM MAVC-010000

MAVC-010000-002140
VCO, SMT
2110-2170 MHz
Rev. VB
Features
•
•
•
•
High Performance, Low Cost
Low Phase Noise
Miniature SMT Package (LSM1)
RoHS Compliant
Description
This VCO, in a SMT package, provides electrical shielding, easy
PCB assembly and repeatable performance. The oscillator is
designed for use in wireless base stations and other applications.
M/A-COM VCOs are manufactured in an ISO9001 certified facility, incorporating surface mount assembly and automated electrical testing. This ensures consistent electrical performance
and quality over volume production quantities.
Pin Configuration
Devices are designed to function after exposure to the shock,
vibration, thermal shock and moisture conditions typically encountered in base station and other infrastructure environments.
Pin No.
Function
1
RF Output
Electrical Specifications1:
Z0 = 50 Ohms, Vcc = 5V.
2
VCC
3
Vtune
4
GND
Parameter
Test Conditions
Units
Min
Frequency Range
Over Top 2
MHz
2110
2170
RF Output Power
Over VCC and Top 2
dBm
-2.0
+4.0
V
+1
+4.0
Tuning Voltage
Phase Noise
Over Top
2
SSB at 10 kHz offset from carrier
SSB at 100 kHz offset from carrier
SSB at 1000 kHz offset from carrier
Tuning Sensitivity
Typ
dBc/Hz
-100
-122
-141
MHz/V
30
Max
-95
-117
-137
Harmonic Output
(Non Harmonic spurious < -70dBc)
dBc
-15
-10
Frequency Pushing
VCC = +5.25V ± 0.25V
MHz/V
2.5
4.0
Frequency Pulling
1.5:1 VSWR load, all phases
MHz
Frequency Drift
Over Top
2
Tune Input Capacitance
Supply Voltage (VCC)
6.0
MHz/°C
-0.18
pF
VCO oscillates
Supply Current (ICC)
V
mA
50
+4.75
+5.00
+5.25
15
20
1. All specification limits are indicated values over the temperature range -37C to 75C.
2. See Absolute Maximum Ratings for operating temperature.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAVC-010000-002140
VCO, SMT
2110-2170 MHz
Rev. VB
Absolute Maximum Ratings TA = +25°C
Parameter
Absolute Maximum
Supply Voltage (VCC)
4.5V to 5.5 V
Operating Temperature
-40°C to +85°C
Storage Temperature
-45°C to +120°C
Solder Assembly
Temperature
See App Note M2032
Ordering Information
Part Number
MAVC-010000-002140
Package
Tape and Reel (500/Reel) 1
1. See application note M513.
Environmental Specifications
Devices are designed to function after exposure to vibration, thermal shock and moisture conditions. See
MVS Qual Report for details of tests performed.
1. Operation of this device above any one of these parameters
may cause permanent damage.
Recommended PCB Layout
1.
2.
3.
Tolerance: ±0.1mm
View is shown from top of device.
Solder masked areas to be left clear. These areas
may have active vias.
Note: Dimensions in Millimetres. (Inch dimensions for reference only).
Outline Drawing
1.
2.
3.
4.
5.
Plating: Au, 0.05μm — 0.15μm over Ni barrier of 2.5μm — 5.0μm.
Internal Solder: Sn95.5/Ag4.0/Cu0.5, lead free.
Substrate: FR4
Cover: mild steel
Tolerance: ±0.2mm unless otherwise noted.
ECO History
Rev
Date
Description
By
A
19th July 2006 Created data sheet based upon MLO81169-02140
JS
B
1st Sept 2006
JS
Updated electrical specification based upon measured data
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.