RoHS Compliant 4:1 Auto Transformer 5-1200MHz MABACT0061 V1P Features • • • • • Schematic Surface Mount 4:1 Impedance, unbalanced to unbalanced 260°C Reflow Compatible RoHS* Compliant Available on Tape and Reel. Reel quantity 2000 Description M/A-COM’s MABACT0061 is a 4:1 Auto transformer in a low cost, surface mount package. Ideally suited for high volume CATV/Broadband applications. Case Style: SM-22 Pin Configuration Pin No. Function 1 Secondary Dot (e.g. 200 Ohm) 2 Not connected (ground) 3 Not connected (ground) 4 Primary & Secondary (ground) 5 Primary Dot (e.g. 50 Ohms) Ordering Information Part Number Package MABACT0061TR 2000 piece reel Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010 Note: Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. RoHS Compliant 4:1 Auto Transformer 5-1200MHz MABACT0061 V1P Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Units Min Typ Max Insertion Loss 5 - 600 MHz dB - 1.2 1.5 Insertion Loss 600 - 1000 MHz dB - 1.6 2.1 Insertion Loss 1000 - 1200 MHz dB - 2.1 2.6 Input Return Loss 5 - 20 MHz dB 9 11 - Input Return Loss 20 - 120 MHz dB 11 13 - Input Return Loss 120 - 1000 MHz dB 5 10 - Input Return Loss 1000 - 1200 MHz dB 4 5 - Absolute Maximum Ratings 1,2 Parameter Absolute Maximum Max Input Power 250mW DC current 240mA Operating Temperature -40°C to +85°C Storage Temperature -55°C to +100°C Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. RoHS Compliant 4:1 Auto Transformer 5-1200MHz MABACT0061 V1P Typical Performance Curves: TA = 25°C, Z0 = 50Ω 1 Insertion Loss (Pin 5 to Pin 1) Input Return Loss 0.0 0.0 -2.0 -0.5 -4.0 -6.0 dB dB -1.0 -1.5 -8.0 -10.0 -12.0 -2.0 -14.0 -16.0 -2.5 5 204 403 602 802 Frequency (M Hz) 1001 1200 5 204 403 602 802 1001 1200 Frequency (M Hz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.