MA-COM AM

AM-123 / AMC-123
High Performance Amplifier,
10 dB Gain 5 - 500 MHz
Features
Rev. V3
FP-7
• 3.5 dB Typical Midband Noise Figure
• +42 dBm Typical Midband Intercept
Description
M/A-COM’s AM-123 is a coupler feedback amplifier
with high intercept and compression points. The use
of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is
packaged in a TO-8 package. Due to the internal
power dissipation the thermal rise minimized. The
ground plane on the PC board should be configured
to remove heat from under the package AM-123 is
ideally suited for use where a high intercept, high
reliability amplifier is required.
C-32
Absolute Maximum Ratings 1
Parameter
Absolute Maximum
Max. Input Power
+23 dBm
Vbias
+15.75 V
Operating Temperature
-55°C to +85°C
Storage Temperature
-65°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
AM-123 / AMC-123
High Performance Amplifier,
10 dB Gain 5 - 500 MHz
Rev. V3
Electrical Specifications: 2,3 TA = -55°C to +85°C Case Temperature
Parameter
Test Conditions
Frequency
Units
Min.
Typ.
Max.
Gain
@+25oC
50 MHz
dB
9.4
10.0
10.6
Frequency Response
—
5 - 500 MHz
dB
—
—
±0.7
Gain Variation with
Temperature
—
5 - 500 MHz
dB
—
—
±1.0
1 dB Compression
Output Power
5 - 500 MHz
10 - 300 MHz
dBm
dBm
+16
+19
—
—
—
—
Noise Figure
—
5 - 500 MHz
10 - 300 MHz
dB
dB
—
—
—
—
7.5
5.5
Reverse Transmission
—
5 - 500 MHz
dB
—
-18
-15
VSWR
—
5 - 500 MHz
10 - 400 MHz
Ratio
Ratio
—
—
—
—
2.5:1
2:1
Output IP2
Two-Tone inputs up to +10 dBm
5 - 500 MHz
10 - 300 MHz
dBm
dBm
+33
+40
—
—
—
—
Output IP3
Two-Tone inputs up to +10 dBm
5 - 500 MHz
10 - 300 MHz
dBm
dBm
+22
+32
—
—
—
—
Vbias
—
—
VDC
+14.5
+15.0
+15.5
Ibias
Vbias = +15.0 VDC
—
mA
—
62
75
Power Dissipation
@ +15 V Bias
—
mW
—
930
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1 W must be provided
in use.
S-Parameter Data
Frequency
(MHz)
S11
MAG/ANG
S21
MAG/ANG
S12
MAG/ANG
S22
MAG/ANG
5
0.21/-69.9
3.15/-158.8
0.11/171.3
0.15/92.8
10
0.11/-81.5
3.17/-172.2
0.11/175.0
0.06/116.1
20
0.08/-88.5
3.18/-178.4
0.12/171.7
0.04/139.8
50
0.06/-108.4
3.17/162.9
0.13/159.9
0.03/174.7
100
0.05/-122.8
3.14/142.8
0.13/141.4
0.04/-163.9
200
0.05/-141.8
3.11/104.8
0.13/102.1
0.04/-119.4
300
0.07/-155.4
3.09/66.9
0.12/64.9
0.14/-114.6
400
0.15/177.2
3.08/26.7
0.11/27.3
0.22/-153.2
500
0.20/151.3
3.05/-21.9
0.09/-20.9
0.25/83.4
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
AM-123 / AMC-123
High Performance Amplifier,
10 dB Gain 5 - 500 MHz
Rev. V3
Typical Performance Curves
Ordering Information
Part Number
Package
AM-123 PIN
Flatpack
AMC-123 SMA
Connectorized
Pin Configuration
Part No.
Function
Pin No.
Function
1
RF OUT
5
RF IN
2
GND
6
GND
3
GND
7
GND
4
DC IN
8
DC IN
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.