RoHS Compliant GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz Features • • • • • • • • • • MASW-008566 V1 Functional Schematic Low Voltage Operation: 2.5 V Low Harmonics: < -65 dBc at +34 dBm & 1 GHz Low Insertion Loss: 0.65 dB at 1 GHz High Isolation: 23 dB at 2 GHz 0.5 micron GaAs PHEMT Process Lead-Free 4x4 mm PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MASWSS0118 Description M/A-COM’s MASW-008566 is a GaAs PHEMT MMIC single pole four throw (SP4T) high power switch in a low cost 4 mm 16-lead PQFN package. The MASW-008566 is ideally suited for applications where high power, low control voltage, low insertion loss, high isolation, small size, and low cost are required. Pin Configuration Typical applications are for GSM and DCS handset systems that connect separate transmit and receive functions to a common antenna, as well as other handset and related applications. This part can be used in all systems operating up to 3.0 GHz requiring high power at low control voltage. Pin No. Pin Name Description 1 V1 Control 1 2 RF1 RF Port 1 3 GND RF Ground 4 RF2 RF Port 2 5 GND RF Ground 6 V2 Control 2 7 V3 Control 3 8 GND RF Ground 9 RF3 RF Port 3 10 GND RF Ground Package 11 GND RF Ground 3000 piece reel 12 RF4 RF Port 4 13 GND RF Ground 14 V4 Control 4 15 GND RF Ground 16 ANT Antenna Port 17 Paddle 2 RF Ground The MASW-008566 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Ordering Information Part Number MASW-008566-TR3000 1. Reference Application Note M513 for reel size information 2. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz MASW-008566 V1 Electrical Specifications: TA = 25°C, Z0 = 50 Ω 3 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 4 DC – 1 GHz 1 – 2 GHz 2 - 3 GHz dB dB dB — — — 0.65 0.80 1.00 0.85 1.00 — Isolation DC – 1 GHz 1 – 2 GHz 2 - 3 GHz dB dB dB 27 21 — 29.0 23.0 18.5 — — — Return Loss DC – 3 GHz dB — 20 — IP3 Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz VC = 0 V / 2.5 V dBm — 57 — IP2 Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz VC = 0 V / 2.5 V dBm — 81 — P.1dB VC = 0 V / 2.5 V dBm — 38 — Harmonic 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V dBc — -80 -71 3 Harmonic 1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V dBc — -68 -65 Trise, Tfall 10% RF to 90% RF, 90% to 10% RF, VC = 0 V / 2.5 V µS — 0.2 — Ton, Toff 50% control to 90% RF, 50% control to 10% RF, VC = 0 V / 2.5 V µS — 0.2 — mV — 35 — µA — 10 50 2 nd rd Transients Control Current VC = 0 V / 2.5 V, 34 dBm 3. External DC blocking capacitors are required on all RF ports. 4. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 39 pF for 0.5 - 3 GHz. Absolute Maximum Ratings 5,6 Truth Table 7,8 Parameter Absolute Maximum Input Power (0.5 - 3.0 GHz, 2.5 V Control) +38 dBm Voltage ± 8.5 volts ° ° V1 V2 V3 V4 ANTRF1 ANTRF2 ANTRF3 ANTRF4 1 0 0 0 On Off Off Off 0 1 0 0 Off On Off Off Operating Temperature -40 C to +85 C 0 0 1 0 Off Off On Off Storage Temperature -65°C to +150°C 0 0 0 1 Off Off Off On 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM does not recommend sustained operation near these survivability limits. 7. Differential voltage, V (state 1) -V (state 2), must be 2.5 V minimum. 8. 0 = -5 V to +2.5 V, 1 = -2.5 V to +5 V Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs SP4T 2.5 V High Power Switch DC - 3.0 GHz MASW-008566 V1 Typical Performance Curves Isolation vs. Temperature Insertion Loss vs. Temperature 40 1.6 +25°C +85°C -40°C 35 1.2 30 0.8 25 +25°C +85°C -40°C 0.4 0.0 0.5 1.0 1.5 2.0 2.5 20 3.0 15 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) 1 GHz 3rd Harmonic Rejection 1 GHz 2nd Harmonic Rejection -50 -50 -60 -60 +25°C +85°C -40°C -70 -70 -80 -80 -90 -90 -100 +25°C +85°C -40°C -100 2.0 2.5 3.0 3.5 4.0 4.5 5.0 2.0 Control Voltage (V) 2.5 3.0 3.5 4.0 4.5 5.0 Control Voltage (V) Lead-Free 4 mm 16-Lead PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.