Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Frequency Power Line Filter or Power Entry Module AQ Series UL Recognized CSA Certified 3VAQ8F 6VAQ8F AQ Series Specifications • Low cost solution to power line noise at high frequencies • High common and differential mode performance from 10kHz to 1GHz • Available with an IEC inlet, fuseholder and switch • Suitable for applications where computers are used to process secret or confidential information Ordering Information Maximum leakage current each Line to Ground: 3A Models 6A Models 1.2 mA 2.3 mA .7 mA 1.2 mA @ 120 VAC 60 Hz: @250 VAC 50 Hz: Hipot rating (one minute): Line to Ground: Line to Line: Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Rated Current: 3 V AQ 8 FS Suffix F – Fuseholder FS – Fuseholder & Switch (F & FS on VAQ8 only) Omit if none Input / Output Style 3 – Wire leads 8 – IEC inlet* (line side) Wire leads (load side) 2250 VDC 1450 VDC 3 or 6A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 Electrical Schematics 3A Models LINE LOAD 6A Models AQ Series LINE LOAD Leakage current designation V – Standard Current Rating 3 or 6A Accessories GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord Available Part Numbers 3VAQ3 3VAQ8F 3VAQ8FS 6VAQ3 6VAQ8F 6VAQ8FS *IEC 60320-1 C14 inlet mates with C13 connector 12 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Frequency Power Line Filter or Power Entry Module (continued) AQ Series Case Styles and Dimensions 3VAQ3 6VAQ3 2.46 62.3 .515 13.08 1 2.572 C L 65.3 12.0 Min. 304.8 .515 13.08 #6-32 1.0 ± 0.1 25.4 ± .25 #6-32 5.126 130.0 5.327±.015 135.3 12.0 Min. 304.8 (5 places) #6-32 (2 places) #6-32 Thd. .5 ± .01 12.7 ± .25 (2 x) 3.061 77.8 2.0 ± .01 50.8 ± .25 .78 19.8 .50 ± .02 12.7 ± .5 3VAQ8F 6VAQ8F 6.457 164 5.68 ± .01 44.3 ± .25 4.0 ± .01 102 ± .25 5.96 152.0 5.06 ± .015 128.6 ± .38 2.35 ± .015 59.6 ± .38 .90 22.9 1.58 ±.015 40 ± .38 12.0 Min. 305.0 .958 24.3 2.48 63.0 .355 ref 9.02 #6-32 (6) inserts .411 ref 10.4 2.328 ± .01 59 ± .35 1.125 ± .01 3.062 28.6 ± .25 77.8 #6-32 (6) inserts .354 ±.010 ref 8.99 ± .25 2.576 65.4 .375 ± .125 9.53 ± 3.2 .375 ± .125 9.53 ± 3.2 3VAQ8FS 6VAQ8FS 5.39 ± .015 136.9 ± .38 2.35 ± .015 59.6 ± .38 1.058 26.9 .172 4.37 #6-32 (6) inserts .44 11.2 1.575 ± .015 40.01 ± .38 .958 24.3 #6-32 (6) inserts .411 ref 10.4 1.62 41.2 12.0 Min. 305.0 6.30 160.0 .391 ± .01 9.93 ± .25 12.0 Min. 305.0 1.62 41.2 .375 ± .125 9.53 ± 3.2 RFI Power Line Filters 4.14 105.1 4.36 ± .015 111.4 ± .38 1.98 40.1 1.66 ± .015 42.1 ± .38 CL 2.48 63.0 7.125 181.0 6.347 ± .015 161.2 ± .38 4.0 ± .015 101.55 ± .25 2.33 ±.015 59.0 ± .38 .364 9.25 12.0 Min. 304.8 1.52 ± .01 3.07 38.5 ± .25 77.8 1.12 ± .01 28.3 ± .25 .391 ± .01 9.93 ± .25 2.58 65.4 .375 ± .125 9.53 ± 3.2 13 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide High Frequency Power Line Filter or Power Entry Module (continued) AQ Series Recommended Panel Cutouts .910 ± .005 23.11 ± .13 .855 ± .005 21.72 ± .13 .235 ± .005 R 5.969 ± .13 .620 ± .005 15.75 ± .13 1.295 ± .005 32.89 ± .13 .620 ± .005 Dia. 15.75 ± .13 Performance Data Typical Insertion Loss Measured in closed 50 Ohm system 3VAQ 6VAQ db db 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 0 10 0.01 0.1 1 10 0 100 1000 Frequency in MHz 0.01 0.1 1 10 100 1000 Frequency in MHz Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Minimum Insertion Loss Measured in closed 50 Ohm system Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 14 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com