1008 CHIP INDUCTORS High-Reliability Chip Inductors MS413RAA Current Derating • High SRF and excellent Q values • Tight tolerances, many values at 1% • 28 inductance values from 10 nH to 1 µH 120 120 100 90 80 70 60 50 40 30 100 20 100 47 nH 10 0 90 80 Q Factor 25°C Typical Q vs Frequency 110 Percent of rated Irms The MS413RAA features high temperature materials that allow operation in ambient temperatures up to 155°C and a leach-resistant base metalization with tin-lead (SnPb) terminations that ensures the best possible board adhesion. 100 nH -40 -20 0 70 60 330 nH 50 B overall 750 nH 1800 nH 40 20 40 60 80 100 120 140 160 Ambient temperature (°C) 12 nH H C F I G J 30 A 20 10 0 F 10 100 1000 Frequency (MHz) 10000 E terminal D Terminal wraparound: approx 0.015/0,38 both ends Typical L vs Frequency I Suggested Land Pattern A max B max C max D ref E F G H IJ 0.115 0.110 0.080 0.020 0.080 0.020 0.0600.1000.0400.050 2,92 2,79 2,03 0,51 2,03 0,51 1,522,541,021,27 Note: Dimensions are before solder application. For maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to B and 0.006 in / 0,15 mm to A and C. Core material Ceramic Terminations Tin-lead (63/37) over silver-platinum-glass frit Ambient temperature –55°C to +125°C with Imax current, +125°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 2000 per 7″ reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 2.0 mm pocket depth Document MS101-1 Revised 11/28/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 1008 CHIP INDUCTORS MS413RAA Series (1008) Inductance2Percent SRF min4 DCR max5 ImaxColor Part number1 (nH)tolerance Q min3 (MHz) (Ohms)(mA) code6 MS413RAA100_SZ MS413RAA120_SZ MS413RAA150_SZ MS413RAA180_SZ MS413RAA220_SZ MS413RAA270_SZ MS413RAA330_SZ MS413RAA390_SZ MS413RAA470_SZ MS413RAA560_SZ MS413RAA680_SZ MS413RAA820_SZ MS413RAA101_SZ MS413RAA121_SZ MS413RAA151_SZ MS413RAA181_SZ MS413RAA221_SZ MS413RAA271_SZ MS413RAA331_SZ MS413RAA391_SZ MS413RAA471_SZ MS413RAA561_SZ MS413RAA621_SZ MS413RAA681_SZ MS413RAA751_SZ MS413RAA821_SZ MS413RAA911_SZ MS413RAA102_SZ 10 @ 50 MHz 12 @ 50 MHz 15 @ 50 MHz 18 @ 50 MHz 22 @ 50 MHz 27 @ 50 MHz 33 @ 50 MHz 39 @ 50 MHz 47 @ 50 MHz 56 @ 50 MHz 68 @ 50 MHz 82 @ 50 MHz 100 @ 25 MHz 120 @ 25 MHz 150 @ 25 MHz 180 @ 25 MHz 220 @ 25 MHz 270 @ 25 MHz 330 @ 25 MHz 390 @ 25 MHz 470 @ 25 MHz 560 @ 25 MHz 620 @ 25 MHz 680 @ 25 MHz 750 @ 25 MHz 820 @ 25 MHz 910 @ 25 MHz 1000 @ 25 MHz 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 44 @ 500 MHz 45 @ 500 MHz 50 @ 500 MHz 50 @350 MHz 55 @ 350 MHz 55 @ 350 MHz 60 @ 350 MHz 60 @ 350 MHz 65 @ 350 MHz 60 @ 350 MHz 46 @ 100 MHz 48 @ 100 MHz 37 @ 100 MHz 40 @ 100 MHz 40 @ 100 MHz 38 @ 100 MHz 40 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 40 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 45 @ 100 MHz 35 @ 50 MHz 34 @ 50 MHz 3060 2680 2220 2200 2100 1380 1600 1420 1420 1140 1140 940 900 840 740 680 580 540 500 480 400 360 360 345 335 310 280 280 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.18 0.20 0.22 0.56 0.63 0.70 0.77 0.84 0.91 1.05 1.12 1.19 1.33 1.40 1.47 1.54 1.61 1.68 1.75 900 900 850 900 900 900 850 850 820 780 710 710 440 410 400 390 370 330 330 310 280 280 270 270 270 250 250 230 Black Red Orange Yellow Blue Black Orange Violet Red Yellow Gray Red Violet White Red Orange Green White Orange Blue Black Green Blue Gray Black Brown Red Yellow 1. When ordering, please specify tolerance, termination and testing codes: MS413RAA102GSZ Tolerance:F =1% G = 2% J = 5% Termination:S=Tin-lead (63/37) over silver-platinum-glass frit. Special order: T =Tin-silver-copper (95.5/4/0.5) over silver-platinum-glass frit. P =Tin-lead (63/37) over tin over nickel over silver-platinum-glass frit. Q =Tin-silver-copper (95.5/4/0.5) over tin over nickel over silver-platinum-glass frit. Testing:Z =COTS H =Screening per Coilcraft CP-SA-10001 N =Screening per Coilcraft CP-SA-10003 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 4291A with an AgilentHP 16197A test fixture or equivalents. 4. SRF measured using an Aglilent/HP 8753D network analyzer or equivalent and a Coilcraft CCF1297 test fixture. 5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a Coilcraft CCF858 test fixture. 6. Current production parts are marked with one dot. Prior production parts were marked with three dots. Part marking does not indicate polarity 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document MS101-2 Revised 11/28/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.