Model P260/P261 12.7mm ( ½” ) Square Rotary Potentiometer Sealed or Dust Proof Conductive Plastic Element 1,000,000 Cycle Life Rotary Switch Option Detent Option Multiple Gangs available Wire Lead Options RoHS Compliant MODEL STYLES Side Adjust, PCB Leads, Potentiometer Module (Up to 6 gangs) P260P Side Adjust, PCB Leads, with Rotary Switch Module (Up to 5 gangs) P260S Side Adjust, PCB Leads, with Detent Module (Up to 6 gangs) P260D Top Adjust, PCB Leads, Potentiometer Module (Up to 2 gangs) P260T Potentiometer Module with Wire Leads (Up to 6 gangs) P260L Potentiometer Module with Ribbon Cable (Up to 6 gangs) P260R Side Adjust, Solder Lug Leads, Potentiometer Module (Up to 6 gangs) P261P Side Adjust, Solder Lug Leads, with Rotary Switch Module (Up to 5 gangs) P261S Side Adjust, Solder Lug Leads, with Detent Module (Up to 6 gangs) P261D ELECTRICAL1 Resistance Range, Ohms 500 -1M (for “B” taper) 2K-1M (for other tapers) Standard Resistance Tolerance ± 10% Residual Resistance, Maximum 2 ohms Input Voltage, Maximum 350 Vac Power rating, Watts 0.5W- B taper, 0.25W- others Dielectric Strength 1,500Vac, sea level Insulation Resistance, Minimum 1,000 Megohms Gang Error (Multi-ganged), Maximum +/-3 dB (-40 dB to 0dB) Actual Electrical Travel, Nominal 265° Switch Contact Resistance, Maximum 150 milliohms max. Switch Power Rated 1 0.5A at 30Vdc Specifications subject to change without notice. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 July 14, 2011 Website: www.bitechnologies.com page 1 of 7 BI technologies Model P260/P261 MECHANICAL Total Mechanical Travel 295°± 10° Static Stop Strength 40 oz-in Rotational Torque, Maximum 1.5 oz-in ( 0.5 oz-in each additional gang) Switch Detent, Minimum 2.0 oz-in ENVIRONMENTAL Operating Temperature Range -55°C to +125°C Rotational Life 1,000,000 cycles IP Rating Sealed = IP66 Dust Proof = IP50 ORDERING INFORMATION2 P260P/P261P – POTENTIOMETER MODULE P260 P - D 2 A F 1 C B 100K Model Series Total Resistance Style Tapers A = Audio B = Linear C = Reverse Audio Seal Type S = Sealed D = Dust Proof Full CCW Shaft Position See below Number of Gangs (Up to 6) Shaft Length “L” See Code below Bushing & Shaft Combinations See below Shaft Type See below P260S/P261S – WITH ROTARY SWITCH MODULE P260 S - D 2 A F 1 C B 100K Model Series Total Resistance Style Tapers A = Audio B = Linear C = Reverse Audio Seal Type S = Sealed D = Dust Proof Full CCW Shaft Position See below Number of Gangs (Up to 5) Shaft Length “L” See Code below Bushing & Shaft Combinations See below 2 Shaft Type See below Contact our customer service for custom designs and features. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 July 14, 2011 Website: www.bitechnologies.com page 2 of 7 BI technologies Model P260/P261 P260D/P261D – WITH DETENT MODULE P260 D - D 2 1 A F 1 C B 100K Model Series Total Resistance Style Tapers A = Audio B = Linear C = Reverse Audio Seal Type S = Sealed D = Dust Proof Full CCW Shaft Position See below Number of Gangs (Up to 6) Shaft Length “L” See Code below Detent 1 = Center Detent 2 = 11 Detents 3 = 21 Detents Shaft Type See below Bushing & Shaft Combinations See below P260T – TOP ADJUST, POTENTIOMETER MODULE P260 T - D 2 A F 1 C B 100K Model Series Total Resistance Style Tapers A = Audio B = Linear C = Reverse Audio Seal Type S = Sealed D = Dust Proof Full CCW Shaft Position See below Number of Gangs (Up to 2) Shaft Length “L” See Code below Bushing & Shaft Combinations See below Shaft Type See below Bushing & Shaft Combinations BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 July 14, 2011 Website: www.bitechnologies.com page 3 of 7 BI technologies Model P260/P261 Shaft Type and Shaft Length “L” Code For 3.2mm (1/8”) Shaft Type and Shaft Length “L” Code For 6.35mm (1/4”) Shaft Position (F-Type Shaft) Dashed lines on Type “C” and Type “A” shows position of adjustment slot for S-Type STANDARD RESISTANCE VALUES, OHMS 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1MEG BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 July 14, 2011 Website: www.bitechnologies.com page 4 of 7 BI technologies Model P260/P261 OUTLINE DRAWING P260P/P261P – POTENTIOMETER MODULE P260S/P261S – WITH ROTARY SWITCH MODULE BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 July 14, 2011 Website: www.bitechnologies.com page 5 of 7 BI technologies Model P260/P261 P260D/P261D – WITH DETENT MODULE P260T – TOP ADJUST, POTENTIOMETER MODULE BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 July 14, 2011 Website: www.bitechnologies.com page 6 of 7 BI technologies Model P260/P261 P260L – WITH WIRE LEADS Consult factory for details and options P260R – WITH RIBBON TYPE CABLE Consult factory for details and options BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 July 14, 2011 Website: www.bitechnologies.com page 7 of 7 BI technologies