(1/1) SMD Inductors(Coils) For Power Line(Wound, Magnetic Shielded) Conformity to RoHS Directive VLF Series VLF10045 9.7±0.4 SHAPES AND DIMENSIONS 10.0±0.4 4.5max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 3.6 FEATURES • Mount area: 9.7× 10.0mm Low profile: 4.5mm max. height • Compare to SLF10145(TDK conventional product) type Low loss and large current capability design DC resistance: 0.89× SLF10145 Rated DC current: 1.47× SLF10145 • Generic use for DC to DC converter line. • High magnetic shield construction should actualize high resolution for EMC protection. • Available for automatic mounting in tape and real package. • The products contain no lead and also support lead-free soldering. • It is a product conforming to RoHS directive. APPLICATIONS Note book computers, amusement equipment, DVD players, VRMs, plasma displays, etc. 7.3 10.7 Dimensions in mm ELECTRICAL CHARACTERISTICS Part No. Inductance (µH) Inductance tolerance(%) Test frequency (kHz) VLF10045T-1R0N100 VLF10045T-1R5N9R0 VLF10045T-2R2N7R4 VLF10045T-3R3N6R9 VLF10045T-4R7N6R1 VLF10045T-6R8N5R1 VLF10045T-100M4R3 VLF10045T-150M3R5 VLF10045T-220M2R8 VLF10045T-330M2R3 VLF10045T-470M1R9 VLF10045T-680M1R6 VLF10045T-101M1R3 VLF10045T-151M1R1 VLF10045T-221MR90 VLF10045T-331MR70 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 ±30 ±30 ±30 ±30 ±30 ±30 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 DC resistance(mΩ) max. typ. 5.5 6.8 10.2 11.6 15 21.4 29 43 57 81 112 182 250 352 499 829 4.6 5.7 8.5 9.7 12.5 17.8 25.0 37.3 49.5 70.1 97.6 158 217 306 434 721 Rated current(A)∗ Based on inductance change max. 13.5 11.1 9.1 7.5 6.3 5.2 4.3 3.5 2.8 2.3 1.9 1.6 1.3 1.1 0.9 0.7 Based on temperature rise typ. 10 9 7.4 6.9 6.1 5.1 4.3 3.5 3.0 2.6 2.2 1.7 1.4 1.2 1.0 0.8 ∗ Rated current: Value obtained when current flows and the temperature has risen to 40°C or when DC current flows and the nominal value of inductance has fallen by 30%, whichever is smaller. • Operating temperature range: –40 to +105°C (Including self-temperature rise) • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 002-02 / 20080629 / e531_vlf10045.fm